21091 June 2000 Municipal Solid Waste Incineration A Decision.Maker's Guide 4; CNs , '~ T Rand J. Haukohl LU .Atarxen Municipal Solid Waste Incineration A Decision Maker's Guide T Rand J. Haukohl U. Marxen The World Bank Washington, D.C. © 2000 The International Bank for Reconstruction and Development / THE WORLD BANK 1818 H Street, N.W. Washington, D.C. 20433, U.S.A. All rights reserved Manufactured in the United States of America First printing June 2000 This report has been prepared by the staff of the World Bank. The judgments expressed do not necessarily reflect the views of the Board of Executive Directors or of the governments they represent. The material in this publication is copyrighted. The World Bank encourages dissemination of its work and will normally grant permission promptly. Permission to photocopy items for internal or personal use, for the internal or personal use of specific clients, or for educational classroom use, is granted by the World Bank, provided that the appropriate fee is paid directly to the Copyright Clearance Center, Inc., 222 Rosewood Drive, Danvers, MA 01923, U.S.A., telephone 978-750-8400, fax 978-750-4470. Please contact the Copyright Clearance Center before photocopying items. For permission to reprint individual articles or chapters, please fax your request with complete information to the Republication Department, Copyright Clearance Center, fax 978-750-4470. All other queries on rights and licenses should be addressed to the World Bank at the address above or faxed to 202-522-2422. Cover photo by unknown. Contents Foreword v Solid Waste Incineration 1 Institutional Framework 2 Waste as Fuel 5 Economics and Finance 7 Project Cycle 10 Incineration Technology 11 iii Foreword Municipal Solid Waste Incineration-A Decision the project is not institutionally, economically, techni- Maker's Guide is a tool for preliminary assessment of cally, or environmentally feasible. Therefore, either the the feasibility of introducing large-scale incineration project should be redesigned, or the unfulfilled criteria plants into the waste management systems of major should be studied in depth to darify their influence on cities in developing countries. the project viability. The Decision Maker's Guide targets waste manage- The supporting Technical Guidance Report provides ment authorities, as well as institutions involved in the foundation for a much more detailed evaluation of financing public utility projects. This guide identifies all the aspects of a proposed project. The Report is spe- the most important factors in assessing short- and long- cific and requires some prior technical knowledge term viability of municipal solid waste incineration. (although not necessarily about waste incineration). It Fulfillment of the key criteria of the Guide (manda- is thus intended mainly for the organizations support- tory, strongly advisable, or preferable) does not neces- ing the decision makers. sarily mean that a project is feasible. Compliance with The Guide was prepared by Mr. J. Haukohl, Mr. T. the key criteria simply allows the project proposer to Rand, and Mr. U. Marxen of RAMBOLL, and it was proceed with a proper feasibility study with limited managed by Mr. J. Fritz of the World Bank. It was risks of a negative outcome. reviewed by Dr. C. Bartone of the World Bank and by Noncompliance with one or more of the mandato- Mr. L.M. Johannessen, long-term consultant to the ry key criteria, however, indicates a significant risk that Bank. Legend MSW: Municipal solid waste (domestic and similar) ISW: Industrial solid waste Mass burning: Incineration of MSW as received Incineration plant: Treatment facility for solid waste with energy recovery and emission control Key criteria identifying the factors influencing the decision-making process are listed in order of priority, using the following grading system: / / / Mandatory key criteria / / Strongly advisable key criteria / Preferable key criteria If a mandatory key criterion cannot be expected to be fulfilled, further planning of a solid waste incineration plant should be stopped. Note: Decision flow charts in the text can be applied to clarify whether a key criterion may be considered fulfilled. v A Decision Maker's Guide to Municipal Solid Waste Incineration Solid Waste Incineration as CO2 (carbon dioxide) and CH4 (methane). The bal- ance between these two gases and time frame for the Municipal solid waste (MSW) incineration plants tend reactions varies by alternative. Incineration provides to be among the most expensive solid waste manage- the best way to eliminate methane gas emissions from ment options, and they require highly skilled person- waste management processes. Furthermore, energy nel and careful maintenance. For these reasons, incin- from waste projects provides a substitute for fossil fuel eration tends to be a good choice only when other, combustion. These are two ways incineration helps simpler, and less expensive choices are not available. reduce greenhouse gas emissions. Because MSW plants are capital-intensive and One of the most attractive features of the inciner- require high maintenance costs and comparatively ation process is that it can be used to reduce the orig- higher technically trained operators, they are common- inal volume of combustibles by 80 to 95 percent. Air ly adopted by developed countries. However, high cap- pollution control remains a major problem in the ital and maintenance costs may make MSW incinera- implementation of incineration of solid waste dis- tion beyond the reach of many developing countries. posal. In the United States, the cost of best available The Decision Maker's Guide aims to reduce such mis- technology for the incineration facility may be as takes by clarifying some of the basic requirements for a high as 35 percent of the project cost. The cost of con- successful incineration plant project. trol equipment will, however, depend upon the air pollution regulations existing in a given developing Incineration Advantages country. Incineration is an efficient way to reduce the waste vol- Waste incineration may be advantageous when a ume and demand for landfill space. Incineration plants landfill cannot be sited because of a lack of suitable sites can be located close to the center of gravity of waste gen- or long haulage distances, which result in high costs. eration, thus reducing the cost of waste transportation. Using the ash from MSW incinerators for environmen- Incineration Disadvantages tally appropriate construction not only provides a low An incineration plant involves heavy investments and cost aggregate but further reduces the need for landfill high operating costs and requires both local and for- capacity. In particular, incineration of waste containing eign currency throughout its operation. The resulting heavy metals and so on should be avoided to maintain increase in waste treatment costs will motivate the a suitable slag quality. (However, ordinary household waste generators to seek alternatives. Furthermore, waste does contain small amounts of heavy metals waste incineration is only applicable if certain require- which do not readily leach under field conditions and ments are met. The composition of waste in develop- which routinely pass USEPA TCLP tests.) The slag qual- ing countries is often questionable in terms of its suit- ity should be verified before it is used. Energy can be ability for autocombustion. The complexity of an recovered for heat or power consumption. incineration plant requires skilled staff. Plus, the All waste disposal alternatives eventually decompose residues from the flue gas cleaning can contaminate the organic materials into simpler carbon molecules such environment if not handled appropriately, and must be 1 2 Municipal Solid Waste Incineration disposed of in controlled and well-operated landfills to A high degree of interaction, either through owner- prevent groundwater and surface water pollution. ship or long-term agreements, between the different parts of the waste management system and the waste Applicability of Incineration incineration plant is important to avoid environmen- MSW incineration projects are immediately applicable tal, institutional, or financial imbalances in the overall only if the following overall criteria are fulfilled. solid waste management system. * A mature and well-functioning waste management The Waste Sector system has been in place for a number of years. A well-developed and controlled waste management * Solid waste is disposed of at controlled and well- system is considered a prerequisite to an MSW incin- operated landfills. eration plant. Generators consider waste to be a nui- * The supply of combustible waste will be stable and sance and want to dispose of it at the lowest possible amount to at least 50,000 metric tons/year. cost. However, many people who work formally or * The lower calorific value must on average be at least informally with waste collection, transportation, recy- 7 MJ/kg, and must never fall below 6 MJ/kg in any cling, and disposal seek to maximize their profit or season. make a living. * The community is willing to absorb the increased Existing regulations and enforcement must there- treatment cost through management charges, tip- fore be highly efficient to ensure that all waste that can- ping fees, and tax-based subsidies. not be recycled is disposed of at controlled and well- * Skilled staff can be recruited and maintained. operated landfills. This goes for both municipal solid * The planning environment of the community is sta- waste, often taken care of by a public waste manage- ble enough to allow a planning horizon of 15 years ment system, and industrial solid waste (ISW), gener- or more. ally handled by independent waste companies. Overall control of the waste flow-including ISW, if part of the design volume-is important to ensure reli- Institutional Framework able supply of suitable waste to the waste incineration plant. The success or failure of an incineration scheme Mature solid waste management systems are highly depends on the attitude of the multiple stakeholders integrated and operated efficiently under public finan- and on the legislative and institutional framework cur- cial and budgetary control. They include organizations rently in place. Stakeholders in an MSW incineration plant project often have conflicting interests. The project therefore Figure I RelevantStakeholders can become an environmental and economic issue with many groups. Authorites Waste Sec Localiproviscial governmeot Wastegenerators The stakeholders' reaction to the project may differ Urbanilregional planning Wasterecyclingcompan,es depending on the institutional setting of the plant. The Hnron;t¶authoriaies O treatent plants incineration plant can be located in the waste sector rauthorities ill operators (preferable) or the energy sector, or it can be a fully pri- waste rcnerarinPlant vatized independent entity. In any case, the incinera- tion plant must be an integral part of the waste man- agement system. un Enrg Sector Depending on the organizational affiliation of the EnviromnentaNGOs / orproducers plant, strong irrevocable agreements are needed to reg- Commurilt,groups Pnduotries setiongheatpownr ulate the supply of waste, the sale of energy, and the Neighboringcitriens Districtheatirgcompany price setting. Scavengers Power/energo Decision Maker's Guide 3 involved in the collection, transportation, and dispos- gy sector play an important role when considering an al of waste in environmentally controlled landfills. MSW incineration plant. Costs for some systems are fully paid by the generators Sale of energy in the form of hot water for district (although some are tax supported or subsidized). heating purposes-or in particular cases, low-pressure Introducing new facilities into such a system calls for steam to large-scale industrial consumers nearby, pro- optimizing and controlling the waste flow and fee vided that sufficient contracts and guarantees can be structure to maintain a balance between the different arranged-minimizes plant construction costs and disposal options. In order of complexity, energy can be recovers a high percentage of energy. Sale of combined recovered as hot water, low-grade steam, superheated power and heat or steam results in a degree of energy steam for electricity generation, or a combination of recovery that is no higher, but the cost and the com- the steam options. plexity of the plant are increased. Public awareness campaigns emphasizing waste min- The energy sector is often heavily regulated. imization, recycling, and proper waste management are Concession to produce and sell electricity is generally also part of a mature waste management system. granted to a limited number of public and private operators. An incineration plant established by anoth- The Energy Sector er authority or a private organization may therefore Incineration of MSW is significantly more expensive encounter difficulties before gaining the necessary than controlled landfilling. For a plant to be economi- approvals and agreements. Early cooperation with the cally feasible, costs must be minimized through sale of end-user organizations is therefore useful. recovered energy. It is most feasible when the energy can be sold to one The primary concern is the end use of the energy consumer for its own use or resale. The consumer may produced: district heating, steam, electricity, or any be a utility company with an existing distribution net- combination. Therefore, the characteristics of the ener- work, for example. Energy prices are often subject to taxation or are Figure 2 Assessment ofWaste ManagemntSystemn partly subsidized. Pricing may therefore be a political issue requiring a government decision. Also, in most Optimum -Acceptable developed countries, energy prices are controlled by Icenario waste t fiscal measures to favor energy production based on Is the waste r ;-- collection system cs-biomass fuels. well organized with trotomass N clear division of 5W°5/ Political and socio-economic considerations play an responsibilities and i r when x t p o wase-gnerte control of all waste Important role when fixig the price of waste-generated types? A energy. A high price resulting in a reduction of the waste Is waste disposal / N MsW N tipping fee favors the waste sector, and low energy prices fully controlled? +,waste o4y S | | favor the energy consumers. I fi S | @ g Community Aspects Is waste The community and NGOs where a new MSW inciner- disposed of in A omnt environmentally ation plant is to be established are often concerned about controlled plant landfills? I environmental impacts. These concerns may arise from Yes -Yffi h | l , \ i | g a lack of knowledge, general resistance towards changes, Do the waste or fear of the unknown, such as higher waste manage- generators pay for / N of igher the full cost of &tsw ment charges, loss of subsistence, or fear of pollution. waste collection and disposal? Public awareness campaigns initiated in the early I Ye < . etYes - planning stages can alleviate these concerns. estigate the feasib Furthermore, a detailed discussion about the environ- of the waste as fu mental protection measures included in the project- 4 Municipal Solid WVaste Incineration Figure 3 Assessment of Potential Saleof Energy that the municipality will ensure the environmental performance of the facility. In many cases the public Is the MSW incineration plant located Select hot energy distribution organization finds it easier to nego- where all energy Yes water or LP tiate with another public body, which minimizes the recovered can be sold form coste for cootntasfrtroles for district heating or efficiency. potential for problems. steam for industrial purposes? No There must be a mechanism to ensure the long-term .ly theereSeec r viability of the incineration facility. The risks involved May the energy \steam boiler, be sold as a < ->--Yes turie with in financing such operations relate to controlling costs ofooutetstfoostea electriciti and heat h wr and revenues. Waste tipping fees and energy sales pro- or steam? 0 No ~ / vide revenues. Contracts that guarantee waste volumes Seect a and price over the life of the project are important, and Is only sale of electric addrss teoinwast poswer possible? ----*Yes ith turbene must address the potential for shortfalls in waste and cooling receipts. Energy generation potential relates to both the circuit. No quantity and quality of the waste received. The deteri- oration in waste quality can lead to decreased energy Energy' recovered cannot bebrought to production-in which case, energy sales revenues will gooduse!! also decrease. The facility must have guarantees that allow operations to be sustained. The community Re-assess the economic where the facility is established will thus have to accept feasibility of the project. th ecnoi rik ~~~- - ~~~~~~the economic risk. Operation and maintenance of the plant requires not only with the environmental authorities, but also skilled managers, operators, and maintenance staff, so with the organized NGOs-is necessary. staff recruiting and developing are important. The In the design phase, the environmental authorities skills required are similar to those of the energy sector. are to establish standards for the plant emissions and The owner may choose to subcontract all or part of the handling of the residues. In the operational phase, the operation and maintenance of the facility to private same authorities will need to control and enforce those companies with long-standing practical experience. standards. Worldwide, there are few experienced manufactur- The public concern may lessen if the environmental ers and builders of MSW incineration plants. Hence, authorities and those in charge of the MSW incinera- foreign currency will be needed not only for the initial tion plant are truly independent of one another. investment but also for certain spare parts. The plant must therefore be organized with unhindered access to Plant Ownership and Operation procurement of spares and services paid for in both The number of stakeholders around an MSW inciner- local and foreign currency. ation plant will result in diverging and conflicting interests. Depending on who owns the incineration Key Criteriafor Institutional Framework plant, institutional borderline problems may arise regarding delivery of a sufficient quantity and quality / / v/ A solid waste management system, com- of waste, the pattern and price of sale of energy or both. prising a controlled and well-operated Problems must be solved at an early stage through landfill, has been functioning well for a detailed long-term agreements. Key agreements are number of years. those related to waste supply and energy sale, Municipally operated incineration plants have many / / $ Solid waste collection and transportation benefits. The municipality can control the collection (MSW and ISW) are managed by a limited and transport of waste to the facility (although this is number of well-regulated/controlled organ- not always the case). The public has some confidence ization(s). Decision Maker's Guide 5 / / v/ There are signed and approved letters of bustibility are not fulfilled, the project should be ter- intent or agreements for waste supply and minated. energy sale. As a result of the socio-economic situation in many low to middle income countries or areas, only limited / / / Consumers and public authorities are able amounts of useful resources are wasted. Organized and willing to pay for the increased cost of and informal recycling activities in the waste handling waste incineration. system tend to reduce the amount of paper, card- board, and certain types of plastic in the waste. / / / Authorities are responsible for controlling, Additionally, the waste may have high ash and mois- monitoring, and enforcing operations. ture content. Municipal solid waste in such areas therefore often */ / / A public guarantee is available for repay- ends up with a low calorific value and its ability to burn ment of capital costs and operation costs without auxiliary fuel is questionable either year- round or in certain seasons. In areas with heavy pre- / / The authorities responsible for control, cipitation, closed containers for collection and trans- monitoring, and enforcement are indepen- portation should be used to avoid a significant increase dent of the ownership and operation of the of the water content of the waste. plant. Industrial, commercial, and institutional wastes (except from market waste) tend to have a significant- i */ Skilled staff for plant operation are available ly higher calorific value than domestic waste. Mixing to the plant owner at affordable salaries. different types of wastes may therefore make incinera- Otherwise, there must be long-term reliable tion possible. However, the collection system must be operation and service contracts. managed well to maintain segregated collection under these circumstances. V The waste management authority owns the Waste generation depends highly on socio-econom- incineration plant. ic conditions and the degree of urbanization and industrialization. In general, waste generation and composition data cannot be projected from one place Waste as Fuel to another. Introduction of advanced waste treatment facilities must therefore always be based on a compre- A most crucial factor in the feasibility of an MSW hensive local waste survey. incineration plant is the nature of the waste and its Introduction of advanced waste treatment like calorific value. If the mandatory criteria for waste com- MSW incineration will have a significant impact on Table I Waste Generation Waste Generation (kg/cap./year) Annual Area Range Mean growth rate OECD-total 263-864 513.0 1.9% North America n.a 826.0 2.0% Japan n.a. 394.0 1.1% OECD-Europe n.a. 336.0 1.5% Europe (32 countries) 150-624 345.0 n.a. 8 Asian capitals 185-1,000 n.a. n.a. South and WestAsia (cities) 185-290 n.a. n.a. Latin America and the Caribbean 110-365 n.a. n.a. n.a. = Not applicable. Source: cf Technical Guidance Report 6 Municipal Solid Waste Incineration Table 2 Waste Components % of waste Guangzhou, China, 8 districts Manila 22 European countries 1993 1997 1990 Fraction Range Mean Mean Range Mean Food and organic waste 40.1-71.2 46.9 45.0 7.2-51.9 32.4 Plastics 0.9-9.5 4.9 23.1 2-15 7.5 Textiles 0.9-3.0 2.1 3.5 n.a. n.a. Paper and cardboard 1.0-4.7 3.1 12.0 8.6-44 25.2 Leather and rubber n.a. n.a. 1.4 n.a. n.a. Wood n.a. n.a. 8.0 n.a. n.a. Metals 0.2-1.7 0.7 4.1 2-8 4.7 Glass 0.8-3.4 2.2 1.3 2.3-12 6.2 Inerts (slag, ash, soil, and so on) 14.0-59.2 40.2 0.8 n.a. n.a. Others n.a. n.a. 0.7 6.6-63.4 24.0 n.a. = Not applicable. Source: cf Technical Guidance Report existing informal recycling activities. For example, figur4AssessnentofWasteasFuel scavengers may lose their source of income. Even if Has a survey been Conduc a these people are compensated for their loss of income, conducted to establish the No waste some of them will shift to the early stages of the han- agountortMSW itea prograrng dling system. This may alter the composition and com- Yes bustibility of waste arriving at an incineration plant. Do records docunent the . . Do records document the A ~~~~~Conductsa Scavenging and other recycling activities must there- annual variation in waste No waste fore be carefully managed. volume and composition? * / monitoring l-ore be carefully managed. \ >program The waste survey must account for the existing Yes waste composition and calorific value and for expect- * t ed changes during the adopted planning period. Isthe lower calorificNvalue T wasuited for Annual variations must be carefully surveyed and documented to eheat least incineration 6 MI/kg throughout all assessed, for example, by conducting a yearlong sam- seasons? (Average annual pling program to establish waste constituents, trends, LCV>7 MJ/kg) Yes and seasonal variation, as well as variation between scavenefgmandrect o ing o Enseuen te scavenging and recycling ~~~ ~~~~No cosqune collection areas. on the waste volumre and f ointroducing ion areas. ~~~~~~~~~~~~~composition been i >ncnrto investigated? Key Criteria for Waste as Fuel _ The waste is likely / */ / The average annual lower calorific valuefeasibleformass V vf The average annual lower calorific value ~~~~~~burning must be at least 7 MJ/kg, and must never fall below 6 MJ/kg in any season. / / Assumptions regarding the delivery of com- / / Forecasts of waste generation and composi- bustible industrial and commercial waste to tion are established on the basis of waste an incineration plant should be founded on surveys in the catchment area of the an assessment of positive and negative planned incineration plant. This task must incentives for the various stakeholders to be carried out by an experienced (and inde- dispose of their waste at the incineration pendent) institution. facility. Decision Maker's Guide 7 / / The annual amount of waste for incinera- Economics and Finance tion should not be less than 50,000 tons, and the weekly variations in the waste supply to MSW incineration is an advanced waste treatment the waste incineration plant should not technology that is costly to implement, operate, and exceed 20 percent. maintain. A significant amount of foreign currency must be available for the initial procurement of equip- A preliminary feasibility assessment of using a par- ment and spares, and for replenishing stocks of spares ticular waste as fuel can be made on the basis of the and for expatriate expert plant overhauls later. content of ash, combustible matter (ignition loss of dry Normally, MSW incineration furnaces are designed sample), and moisture. with a capacity limit of about 20 to 30 metric tons/h. The maximum amount of energy recoverable The recommendation is 10 to 20 metric tons/h. It is rec- through MSW incineration depends primarily on the ommended to divide the total plant capacity into two lower calorific value of the waste, but also on the sys- or more identical incineration lines, thus improving tem applied for energy recovery. It is most efficient the plant's flexibility and availability-for example, when both electricity and steam/heat are produced, when one line is closed for maintenance. and the yield is lowest when only electricity is generat- The investments in an MSW plant depend to a ed and the surplus heat is cooled away. great extent on the required form of energy output. Energy prices vary greatly from place to place, even The least expensive plants are those equipped with within the same country. Electricity is a high-value hot water boilers only. Production of steam and elec- energy form, so a low energy yield is, to some extent, tricity makes the investments in mechanical plant and compensated for through price differences. civil works much higher (about 40 percent). The Fig reS EnergyRecovery Figure6 MdueofEneagySale (Based on anelectricityprice of $351MWh 3.00 and aheatprice of $15/MWh) 60.0 2.50 '2.00 = - 40.0 30.0 ~~~~~~ 1.00~~~~~~~~~~~~~~~~~~~2. 0.50 -- 10.0 0.00 6 7 8 9 10 11 0.0 Lower Calorific Value (MI/kg) 6 7 8 9 10 11 ._______________________________________________ Lower Calorific Value (MJ/kg) CHP - - -- Power only-------Heat only. Heat andpower Hea--- --- Power Table 3 Fuel Characteristics of MSW Guangzhou. Chma _____ Manila, 8 districts, 1993 _ 5 districts, 1994 Philippines, 1997 Parameter Units Range Mean Mean Mean Combustible % 14.6-255 22.3 31.4 37.6 Ash % 13.8-43.1 28.8 22.0 15.6 Moisture % 39.2-63.5 48.9 46.6 46.7 Lower calorific value kJ/kg 2,555-3,662 3,359 5,750 6,800 8 AMunicipal Solid Waste Incineration operating costs are also higher for electricity produc- ty graph indicates the resulting change in treatment ing facilities. costs if the waste has a reduced calorific value or if the Figures 7 and 8 indicate estimated investments and supply of waste falls short of the design load. net operating costs as of mid 1998 as a function of the annual amount of waste processed at power generating Fge9 SensitityoflninerationCosts plants. It is, furthermore, assumed that the plants are M 8 0 6 Ml/kg (mm. calorific value) equipped to meet medium-level emission standards 85. \ (see next section). Compliance with basic emission 9 \ control allows only a 10 percent investment reduction. 7 \.0 The assumed operating time is 7,500 hours annually. I MI/kg .esign load Max.capacitv 65.0 M/gDeinla Ma.cact The curves are valid only for plants designed for waste E l with a lower calorific value of less than 9.0 MJ/kg. l Furthermore, the electricity sale price is assumed to be i-i $35/MWh. 0 N45.0 The figures indicate a significant scale of economy with respect to investment as well as net treatment M tin. capacity 35.0 costs. The net treatment costs of an MSW incineration 25.0________________________________ plant are rather sensitive to fluctuations in the quanti- 180,000 200,000 220,0(0 240,000 260,000 280,000 300,000 320,000 340,000 ty and quality of waste treated. The net costs sensitivi- wasteSapply(metrictons/year) Figure 7 Estimated Cost of Incneration Plants Fgu 10 Assessment of Praect Economy Investment Costs Is a public guarantee for Obtain Plaint Capacity (metric tons/day) payment of capital and N commitment 0 500 1,000 1,500 2,000 2,500 operating costs \ / or cancel 350 210 obtainable? project 300 \180 a- I e 30. Investmentfcapacitv Total 3Yes 250 150 A Is foreign currency c 200 120 committed/available for No Cancel capital and operating \ ec Machinery 90 costs? I 01 60 S I / . _^ | ~~~~~~~~~~~~~~~~~~~~~~~~Yea 50 C 30 Yes Are the regulations for The 0 0 enforcing payment of Nonci 0 100 200 300 400 500 680 700 800 efrm amn fg \ > | eooi 0 100 200 300 400 500 600 700 800 ~~waste charges and v01iability is in Plant Capacity ( 1,000 metric tons of waste/year) energy in place? jeopard Yes Figure8 EstimatedNetTreatnent Costs Are the serviced Eauate the communities able and No consequences Metric tons/day willing to pay1 the fintroducing 0O 500 1,000 1,500 2,000 2,500 incineration costs? \ incineratton 60.0 800x 50.0 70 Yes Net cost/metric ton Totaleco 60 40.0 Has an economic No Perform 40 . sensitivity analysis been sensitivitv o 30.0 40 conducted and worst \ / analysis' case assessed? 20.0 s Yes _ ~~~~~~~~~~~~~~20 =_0-ttcome tO Theprojectisto 0.0 0 economically 0 100 200 300 400 500 600 700 800 v 1,000 metric tons of waste/year Decision Maker's Guide 9 Waste with a lower calorific value of 6 MJ/kg only has enforcement to ensure that waste is taken to the incin- a net treatment cost of 30 percent above that of waste eration plant rather than disposed of indiscriminately. with a lower calorific value of 9 MJ/kg. If the plant It is important to design an affordable and publicly processes only two-thirds of the design load because of acceptable fee policy, which ensures sufficient income a shortage of waste or extended periods of maintenance, for operating, managing, and developing the plant, as the treatment cost increases significantly. well as a suitable waste flow matching the treatment Any forecast of the net costs of MSW incineration capacity of the plant. Various fee policies are possible should be conservative and accompanied by a sensitiv- with adequate support from a combination of fiscal ity/risk analysis. The economic risk, even for fully pri- and legal measures. Establishing regional or intermu- vatized plants, will end up with the society serviced by nicipal waste management co-operations may provide the plant. economies of scale that should be compared against the The net cost of MSW incineration is significantly increased costs of transport. higher than for landfills established according to strict environmental standards. Therefore, the question that Key Criteriafor Incineration Economy must always be asked about any incineration project is-why not landfill? Only in situations where landfill / / / There must be a stable planning environ- is not viable (for example, if there is no land, as is the ment with predictable prices of consum- case in Singapore, or if there is no political will to site ables, spare parts, disposal of residues, and a landfill) will WTE be a good choice. sale of energy. Furthermore, the capital From a strict financial point of view, it may be diffi- costs (large share of foreign currency) must cult to justify the increased costs of waste disposal. A be predictable. full cost benefit analysis is therefore required to assess whether the locally obtainable benefits justify the costs. /v/ / The financing of the net treatment cost Recovering the costs of an MSW incineration plant must ensure a waste flow as intended in the in low to medium income countries is difficult. overall waste management system. Depending on the family size, each household may eas- Consequently, the tipping fee at the waste ily generate from I to 2 metric tons of waste for incin- incineration plant must be lower or at least eration annually. The net tipping fee at the incineration correspond to the tipping fee at the landfill plant will therefore amount to at least US$ 50 to 100 site. Willingness and ability to pay must be per year per household. Hence, in some regions, the thoroughly addressed. waste service charge could be comparable to other pub- lic supply charges such as power and heating. It is / / / Foreign currency must be available to pur- important to assess the ability and willingness of the chase critical spare parts. population to pay such a treatment charge in addition to the cost of collection and transportation. / / When surplus energy is to be used for dis- The cost of incineration may be recovered through a trict heating, the incineration plant must be combination of a tipping fee usually paid by trade and located near an existing grid to avoid costly industry and a general waste management charge usu- new transmission systems. ally paid by households and such. The general charge may be collected directly as a waste management v/ To be economically feasible, the individual charge, or together with other public service bills (such incineration units should have capacities of as electricity or water), or property taxes, and so on. The at least 240 t/d (10 t/h), and there should be charges may, however, become so great that the normal at least two separate units. market mechanisms or waste disposal systems are dis- torted. The plant may therefore need to be subsidized I/ If a regular market for sale of hot water via the budget of the city. Otherwise, it might take strict (district heating or similar) or low- 10 Municipal Solid Waste Incineration pressure steam is present, the plant should Project Cycle be based on sale of heat only. This is preferable both in terms of technical com- The project implementation cycle of MSW incinera- plexity and economic feasibility. A certain tion plants involves three main phases: feasibility extent of cooling to the environment dur- assessment, project preparation, and project imple- ing the warm season may be preferable to mentation. At the end of each phase, the project should costlier solutions. be reevaluated for feasibility. Figure 11 Typical Implementation Plan Phase and Step Purpose and Issues to Consider Duration | Feasibility Pre-feasibility Study waste quantities, calorific values, capacity, siting, energy 6 months Phase sale, organization, costs, and financing Political Decision | Decide whether to investigate further or to abort the project 3 months Feasibility Study Waste quantities, calorific values, capacity, siting, energy 6 months sale, organization, costs, and financing in detail | Political Decision | | Decide on willingness, priority, and financing ot incineration 6 months plant and necessary organizations Project Establishment of an Establishment Af an official organization and an 6 months Prepar'ation Organization institutional support and framework Phase Tender and Financial Detailed financial engineering, negotiation of loans or other 3 months Engineering means of financing, and selection of consultants Preparation of Reassessment of prDject, specifications, prequalification of 6 months Tender Documents contractors, and tender documents Political Decision Decision on financial package, tender documents and 3 months procedures in detail, and final go-ahead Project Award of Contract and Prequalify contractors, tender documents, select 6 months implementation Negotiations most competitive bid, negotiate contract Phase Construction and Construction by selected contractor and supervision by 2 1/2 years Supervision independent consultant Commissioning and Test all performance specifications, settlements, 6 months Startup commissioning, training of staff, and startup by constructor Operation and Continuous operation and maintenance of plant. 10-20 years Maintenance Continuous procurement of spare parts and supplies. Decision Maker's Guide 11 It is important to involve the public throughout / / / To avoid conflicts, the public should be the project cycle-through awareness campaigns in involved and informed during all phases but the mass media and public hearings on major deci- especially in the planning phase (feasibility sions with a direct community impact. Public par- assessment and project preparation phase). ticipation beyond what is recommended for urban planning and environmental impact assessment Project Implementation may be useful in dissolving public resistance to the The role of the project organization during implemen- project. tation will depend greatly on the final institutional affiliation of the MSW incineration plant. For a fully FeasibilityAssessment privatized facility, the project organization must mon- The feasibility of MSW incineration projects in devel- itor project progress and control the contractor's ful- oping countries is highly questionable. Therefore, the fillment of all obligations. feasibility assessment should be conducted in two For a publicly owned and operated plant, the project stages: preliminary and comprehensive. The prelimi- organization will have to not only monitor and control nary assessment can be based on existing informa- the progress of the actual plant implementation but tion, including properly adapted relevant data from also establish the plant management organization. Staff literature. The comprehensive assessment will involve has to be recruited and trained well ahead of commis- comprehensive collection of local data on waste gen- sioning the facility. Start-up assistance, including train- eration and composition, a detailed study of plant ing of staff and understanding of the operation manu- finance and a full environmental impact assessment, al, is often included in the supplier's contract. for example. Early on, the performance criteria should be established for the plant's air pollution con- trol system. Incineration Technology Project Preparation There are many options for MSW incineration plant An appropriate project organization must be estab- technology. The range of equipment varies from exper- lished early in the project preparation phase. In addi- imental to well proven, though only the well proven are tion, the institutional framework of the facility must be recommended. Development problems with new tech- clarified early on. nology are complicated and costly to solve, as develop- The project organization will develop appropriate ing countries lack the internal technical expertise to agreements regarding project financing, waste supply, overcome them. Such problems could cause the entire energy sale, and disposal of residues, as well as perform project to fail. the necessary environmental impact assessments. Based on the intended application, incineration The project organization will, furthermore, develop plant equipment may be grouped in four main cate- project tender documents and negotiate contracts with gories: successful tenderers. Since the project organization's tasks cover a wide * Pretreatment range of expertise, independent experts with suitable * Combustion system experience in the implementation of waste incinera- * Energy recovery tion projects must be hired. * Flue gas cleaning Key Criteria for the Project Cycle The last three pages of this Guide provide a simpli- fied view of how various types of equipment may be / / / A skilled independent consultant with combined. The diagram on energy recovery shows experience from similar projects should be that energy end use is decisive even for the choice of employed at an early stage. boiler type. The Air Pollution Control diagrams indi- 12 4Municipal Solid Waste Incineration cate the options for meeting various air pollution The design of the combustion system must hinder standards. the formation of pollutants, especially NO, and organ- ic compounds such as dioxins, as much as possible. Pretreatment Mass burning of "as received" and heterogeneous waste Energy Recovery requires little or no pretreatment such as size reduc- A main benefit of solid waste incineration is the possi- tion, shredding, or fine sorting. Mass burning systems bilityof reusingthe waste as fuel for energyproduction. are typically based on a movable grate. The flue gases carrying the energy released in a waste Mass burning incineration with a movable grate incineration furnace have to be cooled in a boiler incinerator is awidelyused and thoroughlytested tech- before the air pollution control system. The boiler is nology for waste incineration. It meets the demands for also a necessary technical installation for energy recov- technica] performance and is capable of accommodat- ery. The feasib]e type of boiler, however, depends on ing large variations in waste composition and calorific how the energy will be used: as hot water for district value. Another, but less widely applied, mass burning heating, process steam for various types of industries, alternative is the rotary kiln. or electricity. Some technologies pretreat the waste stream to The choice between the various end-use possibilities remove non-carbonaceous materials, such as metal depends on the local energy market conditions, induding: and glass-for example, for production of "refuse derived fuel." These technologies offer some benefits in * Existing infrastructure for energy distribution-for terms of reduced furnace size and improved energy example, the availability of a power grid and district efficiency. However, the front-end processing that heating network shreds and mixes the wastes is demanding and expen- * Annual energy consumption pattern (the energy sive. Therefore, the incineration technologies for burn- output from MSW incineration plants is relatively ing pretreated and homogenized waste are of limited constant) use-and historically, such technologies have typically * Prices of the various types of energy and possible failed. agreements with the consumer(s). Theoretically, a fluidized bed may be applied for coombustion of pretreated and homogenized municipal The overall thermal efficiency of an MSW incinera- solid waste. The fluidized bed technology has a num- tion plant equipped for energy recovery depends on the ber of appealing characteristics in relation to combus- end use of the energy recovered. Production of elec- tion technique. The advantages are, however, not thor- tricity has a low thermal efficiency but high-price ener- oughly proven on municipal solid waste, and the gy, whereas hot water for district heating is considered fluidized bed is therefore not recommended. The flu- cheap energy with a high overall thermal efficiency and idized bed may be good for special types of industrial low cost and technical installation complexity. waste, and for this purpose it is widely applied-for The obtainable energy recovery efficiencies appear instance, in Japan. on the flow diagram at the back of the Guide. Combustion System Flue Gas Cleaning When implementing a new municipal solid waste Incinerating municipal solid waste generates large vol- incinieration plant, the technology must be based on umes of flue gases. The flue gases carry residues from feasible and well-proven technology. At present, only incomplete combustion and a wide range of pollutants. the mass burning principle with a movable grate fulfills The pollutants and their concentration depend on the this criterion. Furthermore, suppliers with numerous composition of the waste incinerated and the combus- reference plants that have been successful for a number tion conditions. Ash, heavy metals, and a variety of of years, preferably in low- and middle-income coun- organic and inorganic compounds can be found in tries, should be chosen. varying quantities. Decision Maker's Guide 13 The pollutants are present in the form of particles Table 5 MSW Incineration Flue Gases (dust) and gases such as HCl, HF, and SO2' Some harm- Emission standard ful compounds such as mercury, dioxins, and NO. can (mg/Nm3, dry, 11 % 02) x Parameter Rawflue gas Basic Medium Advance-d only be fully removed by applying advanced chemical Parameter R gas 3s Mi A n treatment technologies that increase the overall invest- Particles 2,00 30 30 10 HCI 600 n.a. 50 10 ment considerably. HF 5 n.a. 2 1 The selection of the flue gas cleaning system S02 250 n.a. 300 50 depends primarily on the actual emission standards, if NO. (as NO2) 350a n.a. n.a. 200 any, and the desired emission level. In this context the Hg 013 nnaa n.a. °.°a * Hg +Cd 1.8 n.a. 0.2 n.a. different APC systems can be grouped as basic, medi- Cd + TI 1.6 n.a. n.a. 0.05 um, or advanced emission control. Ni + As 1.3 n.a. I n.a. Basic emission control, in which only the particulate Pb + Cr + Cu matter is reduced, is simple to operate and maintain +Mn 50 n.a. 5 n.a. and the investment cost is relatively low. At the same + Cr + Co time, a significant part of the most harmful substances + Cu + Mn are also retained because dust particles (fly ash) and +Ni+V 60 n.a. n.a. 0.5 Dioxinsb 3 n.a. n.a. 0.1 pollutants absorbed on the surface of the particles can n.a. = Not applicable in the particular standard. be removed by equipment such as electrostatic precip- a. Without any primary measures. itators. Basic emission control is a minimum require- b.Polychlorinated para-dibenzoe dioxins and furans, ng/Nm3 2,3,7,8- ment. TCDD equivalents By applying relatively simple dry or semidry scrub- bers, medium-level emissions can be controlled. The state-of-the-art flue gas cleaning systems Removal of dioxins and furans has received much (advanced emission control) applied in, for instance, public attention in Europe and North America, which Europe and the United States, are very complex and the has increased installation investments and treatment benefits in terms of reduced emissions should always costs. be compared to other emission sources. Incineration Residues The main residue from MSW incineration is slag. The Table 4 Emission Control Levels amount generated depends on the ash content of the awaste. In the combustion process, the volume of waste Savinglcost Emission compared to plant from high income cities will by experience be reduced control Parameters designedfor medium by approximately 90 percent and the weight by 70 to 75 level controlled control level percent. For low income areas the amount of ash in the Basic Particles only-for example, -10% of total waste can be high-for example, in areas using coal, < 30 mg/Nm3. investment wood, or similar for heating. Medium Standard for particle emission. In addition to the slag, the plant generates residues Additional standards for HCI, from more or less advanced dry, semidry, or wet flue HF, S02, and the heavy metals gas cleaning processes. The amount and its environ- of As, Cd, Cr, Cu, Pb, Mn, Hg, mental characteristics will depend on the technology and Ni. applied. Advanced State-of-the-art emission +15% of total The slag from a well-operated waste incinerator will control. Stricter standards for investment be well burnt out, with only a minor content of organ- the medium level parameters and supplementary control of ic material. Besides, the heavy metals in the slag, which NO., the metals Sb, Co, Tl, and are normally leachable, will to some extent become vit- V as well as dioxins. rified and thus insoluble. Much of the slag may there- 14 Municipal Solid lVaste Incinieration Table 6 Salts in Leachate from MSW Incineration / / / The furnace must be designed for stable and Residues continuous operation and complete burn- Concentration Flyashanddry+ Wetproduct+ out of the waste and flue gases (C0<50 level Slag semidryproduct fly ash mg/Nm3, TOC<10 mg/Nm3). Very High' Cl Cl, Ca, Na, K, Pb Cl, Na, K Highb SO4, Na, K, Ca Zn, S04 SO4, Ca / / / The flue gases from the furnace must be Medium' Cu, Mo, Pb Cu, Cd, Cr, Mo Mo cooled to 2000 C or lower before flue gas Lowd Mn, Zn, As, Cd, As As, Cr, Zn treatment. Ni, Se Vlery L.owv Cr, Hg, Sn Hg Pb, Cd, Cu, Hg -ery 'o Cr, Hg,'Sn Hg Pb, Cd, Cu, vH / / The flue gas cleaning equipment must be at Max. leaching of ions from incinerator residues, indicative least a two-field ESP (basic emission con- a. Initial concentration > 10 g/L b. 0.1-10 g/L trol, dust<30 mg/Nm3). c. 1-100 mg/L d. 0.0O- mg/L / / A controlled landfill must be available for e. < 0.01 nigIL Acotoldlnflmutbavibefr residue disposal. Full leachate control must be exercised at the landfill. fore be used as road construction material or some- thing similar after sorting. / / The annual amount of waste for incinera- The other residues must, however, be disposed of. tion should not be less than 50,000 metric Therefore, a well-designed and well-operated landfill, tons and the weekly variations in the waste preferably located in abandoned mine shafts or other supply to the waste incineration plant places where leaching with rainwater can be prevented, should not exceed 20 percent. must be available. Proper disposal of fly ash and other flue gas clean- / / Municipal solid waste incineration plants ing residues is the subject for another study. However, should be in land-use zones dedicated to in general, it should be treated as hazardous waste and medium or heavy industry. disposed of according to leachate properties. The fine particle size of the residues calls for special / / The stack should be twice the height of the precautions during handling at the plant and the landfill. tallest building within 1.0 km, or at least 70 meters high. Key Criteria for Incineration Technology / See Technical Guidance Report. */ / / The technology should be based on the mass burning principle with a movable grate. Furthermore, the supplier must have numerous reference plants in successful operation for a number of years. O R D E R C O U P O N Municipal Solid Waste Incineration: Requirements for a Successful Project CUSTOMERS IN THE UNITED STATES CUSTOMERS OUTSIDE THE UNITED STATES Mail order to: Contact your local Bank publications distributor World Bank Publications for information on prices in local currency and PO. Box 960, Herndon, VA 20172-0960, USA, payment terms. If no distributor is listed or Fax to 703-661-1501. for your country, use this order form and Order by phone: 703-661-1580 or 800-645-7247. return it to the U.S. address. Order online: www. worldbank. org/publications Questions? E-mail us at books@worldbank.org Title stock Price Qty. Total US$ Municipal Solid Waste Incineration: Requirements for a Successful Project (ISBN 0-8213-4668-7) 4668 $ Shipping and Handfing charges are $8.00 per order. If a purchase order is used, actual shippirg wvill be charged. For air mail delivery outside the United States, Subtotal charges are 813 00 fcr one item plus $6.00 for each additional item. Shipping and Handling PA YMENT METHOD Orders from individuals must be accompanied by payment or credit card information. Total US$ Credit cards are accepted only for orders addressed to the World Bank. Check with your local distributor about acceptable credit cards. Please do not send cash. YES, please send my copy of Municipal Solid Waste Incineration: Requirements for a Successful Project (Please Print) Name Check no. Title in the amount of $ - is enclosed. When ordering directly from the World Bank, make check payable in U.S. funds only drawn Organization on a U.S. bank to: The World Bank. Address Please send your check with your order. City Charge_ to my. Stale American Express Mastercard Visa Card no.__________________________ Zip/Postal Code Card_no. Expiration date / Country Name Phone as it appears on the card (required for all credit card charges) Signature Fax Institutional customers in the U.S. only: E-mail Bill me. Please include purchase order. ^ World Bank Publications Visit our website at www. worldbank. org/publications THE WORLD BANK 1818 H Street, N W. Washington, D.C. 20433 USA Telephone: 202-477-1234 Facsimile: 202-477-6391 Telex: 2MCI 64145 WORLDBANK MICI 248423 WORLDBANK Internet: ww.worldbank.org E -mail: books0vworldbank.org A FREE PUBLICATION -