PROJECT : Vocational Training Improvement Project (VTIP) for Upgradation of Govt. Industrial Training Institute, Tura, Meghalaya, during Financial Year 2011-12 PACKAGE -1 HAND TOOLS TRADE SL.NO PARTICULARS SPECIFICATION QNTY UNIT RATE AMOUNT I II III IV V VI VII VIII DRAUGHTSMAN( 1 Box drawing instrument containing one 15 cm compass Box drawing instrument containing one 15 cm 16 Nos 595.00 9520.00 CIVIL) with pin point, pin point & lengthening bar, one pair compass with pin point, pin point & lengthening spring bows, rotating compass with interchangeable ink bar, one pair spring bows, rotating compass with and pencil points, drawing pens with plain ponit & cross interchangeable ink and pencil points, drawing pens point, screw driver and box of leads. with plain ponit & cross point, screw driver and box of leads. 2 Protractor celluloid 15 cm semi-circular Protractor celluloid 15 cm semi-circular 16 Nos 65.00 1040.00 3 Scale card board-metric set of eight A to H in a box 1:1, Scale card board-metric set of eight A to H in a box 16 Sets 180.00 2880.00 1:2, 1:2:5, 1:5, 1:10, 1:20, 1:50, 1:100, 1:200, 1:500, 1:1000, 1:1, 1:2, 1:2:5, 1:5, 1:10, 1:20, 1:50, 1:100, 1:200, 1:1250, 1:6000, 1:38 1/3, 1:66 2/3 1:500, 1:1000, 1:1250, 1:6000, 1:38 1/3, 1:66 2/3 4 Scale - Metric and section wooden 30 cm long marked Scale - Metric and section wooden 30 cm long 16 Sets 180.00 2880.00 with eight scales - 1:1, 1:2, 1:2:5, 1:10, 1:20, 1:50, 1:100, marked with eight scales - 1:1, 1:2, 1:2:5, 1:10, 1:20, 1:5 1:50, 1:100, 1:5 5 Scales plotting box wood 6 metric scales 30 cms long with Scales plotting box wood 6 metric scales 30 cms 16 Sets 720.00 11520.00 offset scales long with offset scales 6 Set sqaure transparent 2 mm thick with bevelled edges 45 Set sqaure transparent 2 mm thick with bevelled 16 Sets 220.00 3520.00 degree 20 cm edges 45 degree 20 cm 7 Set square celluloid 2 mm thick with bevelled edges 60 Set square celluloid 2 mm thick with bevelled edges 16 Nos 320.00 5120.00 degrees 25 cm 60 degrees 25 cm 8 Board drawing 1250 mm x 900 mm Drawing Board (Imperial size) 16 Nos 4950.00 79200.00 9 Square T 1250 mm / Mini drafter Square T 1250 mm / Mini drafter 16 Nos 1365.00 21840.00 10 Erasing shield small size Erasing shield small size 16 Nos 145.00 2320.00 11 Template-Architects and builders Template-Architects and builders 16 Nos 420.00 6720.00 12 French curves-transparent plastic set of 12 French curves-transparent plastic set of 12 4 Nos 250.00 1000.00 13 Flexible curves 80 cm long Flexible curves 80 cm long 8 Nos 1960.00 15680.00 14 Elliptic trammel with ink and pencil for not less than 10 Elliptic trammel with ink and pencil for not less than 1 Nos 12800.00 12800.00 cm minor axis complete in a case. 10 cm minor axis complete in a case. 15 Brass parallel rulers in a case Brass parallel rulers in a case 4 Nos 1230.00 4920.00 16 Calculator Scientific Calculator Scientific 4 Nos 700.00 2800.00 Pages 1 of 8 64475 v4 PROJECT : Vocational Training Improvement Project (VTIP) for Upgradation of Govt. Industrial Training Institute, Tura, Meghalaya, during Financial Year 2011-12 PACKAGE -1 HAND TOOLS I II III IV V VI VII VIII DRAUGHTSMAN( 17 Planimeter sliding bar pattern 70 cm complete In case Planimeter sliding bar pattern 70 cm complete In 1 Nos 2560.00 2560.00 CIVIL) with magnifier and instructions reading in metric units case with magnifier and instructions reading in metric units 18 Pentagraph - brass-complete in wooden case with Pentagraph - brass-complete in wooden case with 1 Nos 3350.00 3350.00 accessories 60 cms accessories 60 cms 19 Beam compass with fine adjustments with ink and pencil Beam compass with fine adjustments with ink and 2 Nos 2350.00 4700.00 points and two chromium plated weights 30 cm in pencil points and two chromium plated weights 30 wooden case. cm in wooden case. 20 Lerroy printing set 2 Nos 22650.00 45300.00 21 Ammonia box 120 cm x 35 x 35 cms Draughtsman table 1 Nos 3950.00 3950.00 22 Stencils-complete set 6 H Stencils-complete set 6 H 2 Sets 3360.00 6720.00 23 Interlock, interchangeable brass stencils with brush in a Interlock, interchangeable brass stencils with brush 4 Nos 7850.00 31400.00 box. in a box. 24 Land measuring chain 30 meters with 10 arms. Land measuring chain 30 meters with 10 arms. 4 Nos 1950.00 7800.00 25 Steel tape 30 meters long in a leather case Measuring tape steel 30 meters. 2 Nos 1350.00 2700.00 26 Ranging rods wooden fitted with iron shoe 2 metres long Ranging rods wooden fitted with iron shoe 2 metres 16 Nos 455.00 7280.00 long 27 Shovel Shovel 2 Nos 1720 3440 28 Pan M.S. 25 cms. Dia Pan M.S. 25 cms. Dia 6 Nos 390 2340 29 Farma wooden for measuring aggregates Farma wooden for measuring aggregates 1 No 44500 44500 30 Bucket G.I. 35 cm. Dia Buckets – 7 litres capacity. 4 Nos 320 1280 31 Mason’s plumb rule with spirit level Mason’s plumb rule with spirit level 4 Nos 890 3560 32 Mason’s square 30 cm x 30 cm Mason’s square 30 cm x 30 cm 4 Nos 480 1920 33 Sieve for sand 1 mm/100 x 60 cm Sieve for sand 1 mm/100 x 60 cm 1 No 24500 24500 34 Trowel 25 cm x 10 cm Trowel 25 cm x 10 cm 4 Nos 1440 5760 35 Sieve for sand 22 mm/100 x 60 cms. Sieve for sand 22 mm/100 x 60 cms. 1 No 28650 28650 36 Tool caulking set CB 6 Tool caulking set of 2 2 Sets 6500 13000 37 Brick hammer with handle Brick hammer with handle 4 Nos 780 3120 38 Rule fold wooden 60 cms. Rule fold wooden 60 cms. 4 Nos 110 440 39 15 cm painting trowel 15 cm painting trowel 4 Nos 630 2520 40 Line pins corner block Line pins corner block 4 Each 460 1840 41 Motor Board Motor Board 4 Nos 48880 195520 42 Wire brush Wire Brush 15cm X 3.7 cm 4 Nos 120 480 43 Wooden float Wooden float 4 Nos 320 1280 Pages 2 of 8 PROJECT : Vocational Training Improvement Project (VTIP) for Upgradation of Govt. Industrial Training Institute, Tura, Meghalaya, during Financial Year 2011-12 PACKAGE -1 HAND TOOLS I II III IV V VI VII VIII DRAUGHTSMAN( 44 Steel float Steel float 4 Nos 1340 5360 CIVIL) 45 Spirit level 30 cms Spirit level 30 cms 4 Nos 520 2080 46 Chiesel 5 cm hammer headed Chisels Masons Hammer headed punch 4 Nos 1050 4200 47 Bolster Bolster 4 Nos 340 1360 48 Claw hammer Claw hammer 4 Nos 730 2920 49 Spade Spade 4 Nos 1040 4160 50 Measuring tape steel 30 meters. Measuring tape steel 30 meters. 4 Nos 1350 5400 51 Ladder aluminium 3 meters Ladder aluminium 3 meters 4 Nos 8500 34000 52 Pickaxe Pickaxe 2 Nos 3660 7320 53 Hammer 250 gms. Hammer 250 gms. 1 No 240 240 54 Crow bar 3 cm dia. 1.5. lag Crow bar 3 cm dia. 1.5. lag 2 Nos 1650 3300 55 Hand hammer 1 Kg. Hand hammer 1 Kg. 2 Nos 660 1320 56 Binoculars Binoculars 2 Nos 8650 17300 57 Surveyors’ Umbrella Surveyors’ Umbrella 2 Nos 3250 6500 58 Light tracing board fitter with glass and frame and lamp Light tracing board fitter with glass and frame and 2 Nos 25600 51200 lamp DRAUGHTSMAN( 1 Draughtsman Drawing instrument Box containing Box drawing instrument containing one 15 cm 16 Sets 595.00 9520.00 MACHANICAL) compasses with pencil point, point driver, interchaneable, compass with pin point, pin point & lengthening divider penpoint interchangeable,divioder spring bow, pen bar, one pair spring bows, rotating compass with spring bow lengthening bar, pen drawing liner,screw interchangeable ink and pencil points, drawing pens driver instrument, tube with leads. with plain ponit & cross point, screw driver and box of leads. 2 Scale set card board in case(Metric) Scale set card board in case(Metric) 16 Sets 85.00 1360.00 3 Set square celluloid 45o (250*1.5 mm) Set square celluloid 45o (250*1.5 mm) 16 Sets 215.00 3440.00 4 Set square celluloid 45o (250*1.5 mm) Set square celluloid 45o (250*1.5 mm) 16 Sets 215.00 3440.00 5 French-curves (set of 12 celluloid) French-curves (set of 12 celluloid) 16 Sets 250.00 4000.00 6 Drawing Board (750*500 IS: 1444 Drawing Board with stands 16 Nos 5840.00 93440.00 7 Tee-Square (700 mm blade) IS: 1360 Tee-Square (700 mm blade) IS: 1360 16 Nos 675.00 10800.00 8 Steel Rule 300 mm (inches and millimetres) Steel Rule 300 mm (inches and millimetres) 16 Nos 150.00 2400.00 9 Mini Drafter Mini Drafter 16 Nos 485.00 7760.00 10 Rotring pens(0.1 to 0.7) Rotring pens(0.1 to 0.7) 10 Nos 9650.00 96500.00 11 Plastic models for development and geometrical solids Plastic models for development and geometrical 2 Sets 850.00 1700.00 solids 12 Wooden Geometry Box for Black-board work Wooden Geometry Box for Black-board work 1 Sets 990.00 990.00 Pages 3 of 8 PROJECT : Vocational Training Improvement Project (VTIP) for Upgradation of Govt. Industrial Training Institute, Tura, Meghalaya, during Financial Year 2011-12 PACKAGE -1 HAND TOOLS I II III IV V VI VII VIII DRAUGHTSMAN( 13 Caliper outside 150 mm (spring) Caliper outside 150 mm (spring) 8 Nos 240.00 1920.00 MACHANICAL) 14 Caliper Inside 150 mm (spring) Caliper Inside 150 mm (spring) 8 Nos 200.00 1600.00 15 Stencil set complete in box 2 Sets 3360.00 6720.00 16 Steel tape 2 meters (pull type) Steel tape 2 meters (pull type) 1 Nos 480.00 480.00 17 Radius and Fillet templates 1 Sets 920.00 920.00 SURVEYOR 1 Abney level Abney level 1 Nos 1920.00 1920.00 2 Ammonia printing box Ammonia printing box 1 Nos 3950.00 3950.00 3 Box sextant Box sextant 2 Nos 3650.00 7300.00 4 Boning rod Boning rod 1 set 2360.00 2360.00 5 Binocular Binocular 4 Nos 8650.00 34600.00 6 Box drawing instrument containing compass with pencil Box drawing instrument containing compass with 17 Nos 595.00 10115.00 point, point divider interchangable , divider pen point pencil point, point divider interchangable , divider interchangeable, divider spring box, pen spring box, pen point interchangeable, divider spring box, pen lengthening bar , pen drawinig lines , screw divider spring box, lengthening bar, pen drawinig lines, instrument,tube with leads screw divider instrument,tube with leads 7 Calculator 8 digits Calculator 8 digits 17 Nos 420.00 7140.00 8 Chisel Steel 80mm blade Chisel Steel 80mm blade 17 Nos 420.00 7140.00 9 Card board scale( 8 in one box) Card board scale( 8 in one box) 16 Boxes 110.00 1760.00 10 (a) Cross staff wooden box type Cross staff wooden box type 2 Nos 1650.00 3300.00 (b) Cross staff wooden open type Cross staff wooden open type 2 1750.00 3500.00 11 Drawing Board (Imperial size) Drawing Board (Imperial size) 17 Nos 4950.00 84150.00 12 Drawing Machine (Horizental) Drawing Machine (Horizental) 4 Nos 24500.00 98000.00 13 Engineer's chain Engineer's chain 5 Nos 1850.00 9250.00 14 (a) Engineer's level Engineer's level 5 Nos 21200.00 106000.00 (b) Dumpylevel Dumpylevel 2 Nos 18600.00 37200.00 (c) Cokes reversible level Cokes reversible level 1 Nos 25100.00 25100.00 (d) Tilting level Tilting level 4 Nos 22500.00 90000.00 15 Erasing shield Erasing shield 16 Nos 145.00 2320.00 16 French curve plastic (set of 12) French curve plastic (set of 12) 4 sets 250.00 1000.00 17 (a) Ferro printing frame 450 x 600 mm (a) Ferro printing frame 450 x 600 mm 1 Nos 14500.00 14500.00 (b) Ferro printing frame 800 x 600mm (b) Ferro printing frame 800 x 600mm 1 22300.00 22300.00 Pages 4 of 8 PROJECT : Vocational Training Improvement Project (VTIP) for Upgradation of Govt. Industrial Training Institute, Tura, Meghalaya, during Financial Year 2011-12 PACKAGE -1 HAND TOOLS I II III IV V VI VII VIII SURVEYOR 18 Grunter Chain Grunter Chain 5 Nos 1750.00 8750.00 19 Graphs Pen 0.00 (a) For Lining Graphs Pen For Lining 2 1750.00 3500.00 (b) For Printing Graphs Pen For Printing 2 1790.00 3580.00 20 Hand press for numbering & lettering Hand press for numbering & lettering 1 Nos 8500.00 8500.00 Haversacks (canvas bag forkeeping tools) - survey of 21 Haversacks (canvas bag forkeeping tools) - survey of India 8 Nos 1210.00 9680.00 pattern India pattern 22 Height Indicator (Survey of India pattern Height Indicator (Survey of India pattern 8 Nos 12360.00 98880.00 23 Hold all canvas for instrument -(S O I) Hold all canvas for instrument -(S O I) 8 Nos 960.00 7680.00 24 Hones in case (Survey of India) Hones in case (Survey of India) 1 Nos 2250.00 2250.00 25 a) Metric Chain (20M) Metric Chain (20M) 5 Nos 1860.00 9300.00 b) Metric Chain (30M ) Metric Chain (30M ) 5 Nos 1990.00 9950.00 26 Magnifying Glass Magnifying Glass 2 Nos 390.00 780.00 27 Magnet bar (for magnetizing through compass needles Magnet bar (for magnetizing through compass 1 sets 995.00 995.00 needles 28 Metal tube for keeping drawings dia 100mm and 1 meter Metal tube for keeping drawings dia 100mm and 1 8 Nos 3260.00 26080.00 long meter long 29 Pen Knife Pen Knife 16 Nos 190.00 3040.00 30 Protector full circle (Plastic 150mm dia) Protector full circle (Plastic 150mm dia) 16 Nos 55.00 880.00 31 Pantograph Pantograph 2 Nos 3860.00 7720.00 32 Ranging Rod 4m Ranging Rod 4m 32 Nos 940.00 30080.00 33 Off set rod Off set rod 4 Nos 795.00 3180.00 34 Optical square Optical square 4 Nos 830.00 3320.00 35 Railway curve Rilway curve 1 set 1850.00 1850.00 36 Scale diagonal, electroplated Scale diagonal, electroplated 1 Nos 625.00 625.00 37 Stencil set in complete box Stencil set in complete box 2 Nos 3360.00 6720.00 38 Substance bar Substance bar 2 Nos 6920.00 13840.00 39 Set Square (45' & 60'Plastic 280 mm) Set Square (45' & 60'Plastic 280 mm) 17 Prs 290.00 4930.00 40 Tee square Tee square 17 Nos 675.00 11475.00 41 Surveyor Umbrella Surveyor Umbrella 8 Nos 3250.00 26000.00 42 Zinc tray (for washing prints) Zinc tray (for washing prints) 1 Nos 2850.00 2850.00 CARPENTRY 1 Rule, four fold wooden 24� Rule, four fold wooden 24� 17 Nos 110.00 1870.00 2 Caliper, inside 6� Caliper, inside 6� 17 Nos 200.00 3400.00 Pages 5 of 8 PROJECT : Vocational Training Improvement Project (VTIP) for Upgradation of Govt. Industrial Training Institute, Tura, Meghalaya, during Financial Year 2011-12 PACKAGE -1 HAND TOOLS I II III IV V VI VII VIII CARPENTRY 3 Caliper, outside 6" Caliper, outside 6" 17 Nos 240.00 4080.00 4 Marking knife Marking knife 17 Nos 70.00 1190.00 5 Screw driver 12� Screw driver 12� 17 Nos 340.00 5780.00 6 Square, try 8" . Square, try 8" . 17 Nos 240.00 4080.00 7 Saw, hand 18� Saw, hand 18� 17 Nos 1560.00 26520.00 8 Saw, tenon 12" . Saw, tenon 12" . 17 Nos 880.00 14960.00 9 Chisel, firmer ½� to ¾� by 1/8� set of 6 Chisel, firmer ½� to ¾� by 1/8� set of 6 17 sets 1120.00 19040.00 10 Mallet 2 Ibs. with handle. Mallet 2 Ibs. with handle. 17 Nos 320.00 5440.00 11 Hammer, Cross pein Carpenter 1½ lbs. with handle Hammer, Cross pein Carpenter 1½ lbs. with handle 17 Nos 260.00 4420.00 12 Plane Jack 18" wooden stock 2" cutter Plane Jack 18" wooden stock 2" cutter 17 Nos 2860.00 48620.00 13 Plane, Smoothing 9" wooden stock 1¾“ cutter Plane, Smoothing 9" wooden stock 1¾“ cutter 17 Nos 2360.00 40120.00 14 File, 3 corner 2nd cut 5� File, 3 corner 2nd cut 5� 17 Nos 480.00 8160.00 15 Chisel, mortice 1/8" to 3/4" by 1/4" set of 6 . Chisel, mortice 1/8" to 3/4" by 1/4" set of 6 . 17 Nos 1320.00 22440.00 16 Gauge Mortice and Marking Gauge Mortice and Marking 17 Each 780.00 13260.00 17 Stone oil 6�x2�x1� Stone oil 6�x2�x1� 17 Nos 980.00 16660.00 18 Clamp 6� set . Clamp 6� set . 2 sets 4580.00 9160.00 19 Saw set Stanley type Tool maker clamp 4 Nos 2480.00 9920.00 20 Saw compass 16" ,. Saw compass 16" ,. 4 Nos 670.00 2680.00 21 Saw Adze 4" Saw Adze 4" 4 Nos 2260.00 9040.00 22 Saw hand 26' . Tool maker clamp 4 Nos 1560.00 6240.00 23 Saw vice . Saw vice . 1 No 4160.00 4160.00 24 Pincer 6� Pincer 6� 8 Nos 280.00 2240.00 25 Goggles pair Goggles pair 4 pairs 280.00 1120.00 26 Plane, trying 2½� Plane, trying 2½� 4 Nos 2490.00 9960.00 27 Plane, rabbet adjustable ¼� to 1/3� cutter Plane, rabbet adjustable ¼� to 1/3� cutter 4 Nos 4260.00 17040.00 28 Plane, grooving ¼� cutting . Plane, grooving ¼� cutting . 4 Nos 2780.00 11120.00 29 Plane, plough fitted with Srew and set of cutters to 1/2" Plane, plough fitted with Srew and set of cutters to 4 Nos 3849.00 15396.00 1/2" 30 Plane, circular adjustable Plane, circular adjustable 2 Nos 4260.00 8520.00 31 Hammer, claw 1½� Ibs. Hammer, claw 4 Nos 330.00 1320.00 32 Screw driver 16� Screw driver 16� 2 Nos 760.00 1520.00 Pages 6 of 8 PROJECT : Vocational Training Improvement Project (VTIP) for Upgradation of Govt. Industrial Training Institute, Tura, Meghalaya, during Financial Year 2011-12 PACKAGE -1 HAND TOOLS I II III IV V VI VII VIII CARPENTRY 33 Screw driver 9" London pattern . Screw driver 9" London pattern . 4 Nos 310.00 1240.00 34 File, rasp bastard 10� wood rasp file 8 Nos 920.00 7360.00 35 Chisel, mortice 1/8� to ¾� by 1/4" set of 6 Chisel, mortice 1/8� to ¾� by 1/4" set of 6 8 sets 1320.00 10560.00 36 Bit, ratchet brace 10� Bit, ratchet brace 10� 4 Nos 620.00 2480.00 37 Bit, centre ¼�, 5/16�, 3/8� and ½� set of 4 Bit, centre ¼�, 5/16�, 3/8� and ½� set of 4 4 sets 1140.00 4560.00 38 Auger ½�, 5/8�, ¾�, 7/8� and 1� set of 5 Auger set 2 sets 1340.00 2680.00 39 Meter box 24� X 24� wooden Mitre box 4 Nos 670.00 2680.00 40 Gauge, firmer ¼�, 3/8� 1/2" and 5/8� set of 4- Gauge, firmer ¼�, 3/8� 1/2" and 5/8� set of 4- 4 sets 1860.00 7440.00 41 Punch, nail Punch, nail 8 Nos 80.00 640.00 42 Spoke, shave 2� cutter Spoke, shave 2� cutter 8 Nos 580.00 4640.00 43 Pot, glue 5lbs Pot, glue 1 No 430.00 430.00 44 Countersink rose bits ¼� to ½� by 1/8� each Countersink rose bits ¼� to ½� by 1/8� each 4 Nos 780.00 3120.00 45 Saw file taper 6� Saw file taper 6� 4 Nos 82.00 328.00 46 Wing compass 10� or 12� , Compass wing 12� 2 Nos 380.00 760.00 47 Scriber 6� . Scriber 150 mm 2 Nos 240.00 480.00 48 Odd leg caliper jenic Odd leg caliper 2 Nos 360.00 720.00 49 Steel rule 6� Steel rule 6� 4 Nos 120.00 480.00 50 Divider 6� Divider 6� 4 Nos 140.00 560.00 51 Centre punch Centre punch 4 Nos 155.00 620.00 52 Hammer, balI pien 1¼ lbs handled Hammer, balI pien 1¼ lbs handled 4 Nos 400.00 1600.00 53 Chisel cold flat ¾� Chisel cold flat ¾� 4 Nos 350.00 1400.00 54 Chisel, cold ross cut 3/8" Chisel, cold ross cut 3/8" 4 Nos 380.00 1520.00 55 File, flat rough 14� File, flat rough 14� 4 Nos 360.00 1440.00 56 File, half round 2nd cut 10� File, half round 2nd cut 10� 4 Nos 780.00 3120.00 57 File, round 2nd cut 8� File, round 2nd cut 8� 4 Nos 380.00 1520.00 58 Scribing block . Scriber Block Universal 300 mm 1 No 8540.00 8540.00 59 V-Block 3" X 1½� pair V-Block, with clamp 75 mm. 1 pair 3260.00 3260.00 60 Hand drill ¼� capacity Hand drill ¼� capacity 1 No 480.00 480.00 61 Twist drill 1/8" to 1/4" by 1/16" S.S Twist drill 3 mm,5 mm, 6 mm, and 4 mm 1 set 340.00 340.00 62 B.S.W. taps, stocks and dies 1/8� to 3/4" by 1/16" B.S.W. taps, stocks and dies 1/4,3/4 1 set 7620.00 7620.00 63 Hacksaw frame adjustable for 8" to 12" blades Hacksaw frame adjustable for 8" to 12" blades 2 Nos 430.00 860.00 Pages 7 of 8 PROJECT : Vocational Training Improvement Project (VTIP) for Upgradation of Govt. Industrial Training Institute, Tura, Meghalaya, during Financial Year 2011-12 PACKAGE -1 HAND TOOLS I II III IV V VI VII VIII CARPENTRY 64 Cramp, Carpenter 4 ft. Cramp, Carpenter 4 ft. 4 Nos 1140.00 4560.00 65 Cramp, Carpenter 6 ft. Cramp, Carpenter 6 ft. 2 Nos 1820.00 3640.00 66 Bench vice 4� jaws Bench vice 4� jaws 4 Nos 4180.00 16720.00 67 Vice Carpenter 8" jaws. Vice Carpenter 8" jaws. 16 Nos 1980.00 31680.00 68 Portable electric drill complete with kit comprising sawing Portable electric drill sanding accessories. 1 No 5800.00 5800.00 polishing, sanding accessories. 69 Ball baring brume Ball baring brume 2 Nos 0.00 70 A fire extinguisher Fire Extinguisher,9 ltr 2 Nos 9850.00 19700.00 71 A fire buckets . Fire buckets(Set o Three) with stand 4 Nos 4400.00 17600.00 ITE&SM 1 Combination Pliers , Combination Pliers , 17 Nos 250.00 4250.00 2 Long nose Plier Long nose Plier 17 Nos 470.00 7990.00 3 Side Cutter Side Cutter 10 Nos 495.00 4950.00 4 Spanner set Spanner set 5 Set 585.00 2925.00 5 File File 3 Nos 840.00 2520.00 6 Screw Driver Set Screw Driver Set 17 Nos 1860.00 31620.00 7 Soldering Iron (25 W) Soldering Iron (25 W) 10 Nos 350.00 3500.00 8 Desoldering Pump Desoldering Pump 10 Nos 360.00 3600.00 9 Neon tester Neon tester 17 Nos 75.00 1275.00 10 Hand Drilling Machine motorised Hand Drilling Machine motorised 1 No 7320.00 7320.00 11 Rubber Gloves Rubber Gloves 3 Pair 580.00 1740.00 12 Tweezer Tweezer 16 Nos 95.00 1520.00 13 Watch Maker Screw Driver Watch Maker Screw Driver 8 Sets 480.00 3840.00 TOTAL 2516364.00 Pages 8 of 8 PROJECT : Vocational Training Improvement Project (VTIP) for Upgradation of Govt. Industrial Training Institute, Tura, Meghalaya, during Financial Year 2011-12 PACKAGE -2 EQUIPTMENTS & MACHINERIES TRADE SL.NO PARTICULARS SPECIFICATION QNTY UNIT RATE AMOUNT I II III IV V VI VII VIII DRAUGHTSMAN 1 Geometrical Models (Wooden) as per given below 1 Set 1360.00 1360.00 (CIVIL) (i) Cube 08 cm sides Cube 08 cm sides 2 Nos (ii) Rectangular parallel piped 8 cm x 15 cm Rectangular parallel piped 8 cm x 15 cm 2 Nos (iii) Sphere 8 cm dia. Sphere 8 cm dia. 2 Nos (iv) Light circular core 8 cm dia base 15 cm vertical Light circular core 8 cm dia base 15 cm 2 Nos height vertical height (v) Square pyramid 8 cm side base and 15 cm Square pyramid 8 cm side base and 15 cm 2 Nos vertical height vertical height (vi) Cylinder 8 cm dia. 15 cm height Cylinder 8 cm dia. 15 cm height 2 Nos (vii) Prisms triangular 8 cm sides triangle and 15 Prisms triangular 8 cm sides triangle and 15 Nos cm length cm length (viii) Prism hexagonal 8 cm sides hexagon and 15 Prism hexagonal 8 cm sides hexagon and 2 Nos sm length. 15 sm length. 2 Drafting Machine- Vertical type complete with Drafting Machine- Vertical type complete 4 Nos 49500.00 198000.00 drawing board adjustable table and pair of metric with drawing board adjustable table and scales 30 cm and 40 cm long. pair of metric scales 30 cm and 40 cm long. 3 Drafting Machine - Horizontal type complete with Drafting Machine - Horizontal type 4 Nos 38500.00 154000.00 drawing board size adjustable table with pair or complete with drawing board size metric scales 30 cm and 40 cm long. adjustable table with pair or metric scales 30 cm and 40 cm long. 4 PC-Latest Version - for Auto CAD Multimedia Desktop Computer System 5 Nos 45800.00 229000.00 with Licensed Operating System (core i5 Processor, 4 GB DDR-3 RAM, 250 GB HDD, 21" Color TFT Monitor, 500kVA APC UPS, Optical Mouse & Keyboard) 5 a) Plotter Plotter 1 Nos 265500.00 265500.00 b) Printer (Deskjet/ Leaser Jet) Printer (Deskjet/ Leaser Jet) 1 Nos 10800.00 10800.00 6 Print Trimmer cutting edge 100 cm Print Trimmer cutting edge 100 cm 1 Nos 4250.00 4250.00 7 Architect Desktop (latest) Architect Desktop (latest) 5 Nos 45800.00 229000.00 Pages 1 of 4 PROJECT : Vocational Training Improvement Project (VTIP) for Upgradation of Govt. Industrial Training Institute, Tura, Meghalaya, during Financial Year 2011-12 PACKAGE -2 EQUIPTMENTS & MACHINERIES I II III IV V VI VII DRAUGHTSMAN 8 Server Server 1 Nos 215000.00 215000.00 (CIVIL) 9 UPS 5 KV UPS 5 KVA ,30 minute backup 2 Nos 115000.00 230000.00 10 Dumpy Level builder 25cm local length x 23mm Dumpy Level builder 25cm local length x 2 nos 19650.00 39300.00 complete with box and accessories and stand 23mm complete with box and accessories and stand DRAUGHTSMAN 1 Universal Drafting Machine 1500*1000 mm Universal Drafting Machine 1500*1000 mm 2 Nos 49500.00 99000.00 (MACHANICAL) complete with Accessories. complete with Accessories. 2 Computer(Pentium IV) Latest version compatible Computer(Pentium IV) Latest version 8 Nos 43200.00 345600.00 with the latest version of the software GB-HDD, compatible with the latest version of the 1.7 GHz CPU, 52*CD ROM, 15" Colour Monitor software GB-HDD, 1.7 GHz CPU, 52*CD KB+Mouse ROM, 15" Colour Monitor KB+Mouse B) Server (True Dedicated Server) Server (True Dedicated Server) 1 Nos 215000.00 215000.00 C) Software:MS-office 2000 or latest version Auto- Software:MS-office 2000 or latest version 1 Nos 145600.00 145600.00 CAD 2000 with power pack or latest version,8 Auto-CAD 2000 with power pack or latest users licenced version,8 users licenced D) Plotter (Max. A3 size) Plotter (Max. A3 size) 1 Nos 185400.00 185400.00 E) Laser Jet printer latest model 1200*1200 dpl, MB Laser Jet printer latest model 1200*1200 1 Nos 10800.00 10800.00 dpl, MB F) UPS - 5 KVA UPS 5 KVA ,30 minute backup 2 Nos 115000.00 230000.00 3 Ammonia Printing Machine (continuous type) Ammonia Printing Machine 1 Nos 55600.00 55600.00 SURVEYOR 1 Drawing Machine (Table) Drwing Machine (Table) 16 Nos 12600.00 201600.00 (b) Ferro printing frame 800 x 600mm (b) Ferro printing frame 800 x 600mm 1 22300.00 2 Light tracing board fitted glass, Lamp and frame Light tracing board fitted glass, Lamp and 4 Nos 25600.00 102400.00 frame 3 Leveling staff telescope Leveling staff telescope 10 Nos 5420.00 54200.00 4 (a) Plane table with stand with waterproof cover (a) Plane table with stand with waterproof 4 Nos 12760.00 51040.00 cover (b) Alidade Alidade 4 Nos 1650.00 6600.00 (c) Through compass (compass beam wooden) Through compass (compass beam wooden) 8 Nos 650.00 5200.00 (d) Plumbing fork with bobs Plumbing fork with bobs 8 Nos 790.00 6320.00 (e) Telescopic alidade Telescopic alidade 8 Nos 9200.00 73600.00 (f) Indian pattern clinometer Indian pattern clinometer 8 Nos 3250.00 26000.00 CARPENTRY 1 A Saw circular 12� dia. motorised A Saw circular 12� dia. motorised 1 No 48490.00 48490.00 Pages 2 of 4 PROJECT : Vocational Training Improvement Project (VTIP) for Upgradation of Govt. Industrial Training Institute, Tura, Meghalaya, during Financial Year 2011-12 PACKAGE -2 EQUIPTMENTS & MACHINERIES I II III IV V VI VII CARPENTRY 2 Lathe, wood working 6� ht. of centres, 16 bed Lathe, wood working 6� ht. of centres, 16 1 No 18800.00 18800.00 motorised complete with a set of turning tools. bed motorised complete with a set of turning tools. 3 Planner 12" Plane Jack 18" wooden stock 2" cutter 1 No 2860.00 2860.00 4 A Bench Grinder 6" wheels D.E. A Bench Grinder 8" wheels D.E. 1 No 9985.00 9985.00 (B)EXISTING TRADE IT&ESM 1 Power Supply 0-30 V, 2 Amps Power Supply 0-30 V, 2 Amps 5 Nos 6980.00 34900.00 2 Power Supply 30-0-30 V, 2 Amps Power Supply 30-0-30 V, 2 Amps 5 Nos 19360.00 96800.00 3 DC Servo Motor ½ HP DC Servo Motor ½ HP 1 No 29500.00 29500.00 Linear IC Trainer kit Linear IC Trainer kit,+12 V/500 mA regulated power supply;+(1.2-30 V) 4 4 Nos. 21300.00 85200.00 variable,-12 V/500 mA regulated power supply;-(1.2-30 V) variable, 5 AC Servo Motor ½ HP AC Servo Motor ½ HP 1 No 28500.00 28500.00 6 Non contact Tacho Generator Digital typeTacho Generator 1 No 4930.00 4930.00 7 UPS Trainer 500VA Microcontroller based UPS ,which has advantage over cinventional UPS,Normal Input voltage:single phase 230 V AC 50 Hz,Transfer voltage threshold:140 V AC and 1 No 32800.00 32800.00 270 V AC,Maximum load:600 VA (380 watts),nominal output voltage:225 AC +/- 8% use true RMS responding meter 8 SMPS SMPS open frame type 12 V/10 A 5 Nos 5240.00 26200.00 9 RF Signal Generator AF/RF oscillator 30 Hz to 20 MHz,accuracy within 20%,output voltage approx. 0.1 V,modulated frequency approx. 1 1 22300.00 22300.00 KHz,power source 220 V A.C. 50/60 Hz 10 LCD/LED TV Receiver LCD/LED TV 2 Nos. 33650.00 67300.00 11 DTH Receiver (TVRO Terminal with LNB and DTH Receiver (TVRO Terminal with LNB 1 set 2490.00 2490.00 Receiver) and Receiver) 12 Cable TV Line Amplifier Cable TV Line Amplifier 2 Nos. 3850.00 7700.00 Pages 3 of 4 PROJECT : Vocational Training Improvement Project (VTIP) for Upgradation of Govt. Industrial Training Institute, Tura, Meghalaya, during Financial Year 2011- PACKAGE -2 EQUIPTMENTS & MACHINERIES I II III IV V VI VII VIII IT&ESM 14 Application boards for Microprocessor and Application boards for Microprocessor and 5 Each 23650.00 118250.00 Microcontroller kits Microcontroller kits 15 Cell Phone Receiver Cell Phone Receiver 1 No 9850.00 9850.00 16 Scanner Flatbed Scanner Flatbed 1 No. 5500.00 5500.00 17 Hub – 8 Port Hub – 8 Port 1 No. 4850.00 4850.00 18 Terminal Adopter Terminal Adopter 1 No. 9560.00 9560.00 19 LAN Switch – 24 port LAN Switch – 24 port 1 No. 29500.00 29500.00 20 LAN Tester LAN Tester 3 Nos. 8500.00 25500.00 21 Fluke Meter Fluke Meter 2 Nos 12650.00 25300.00 24 PC Hardware Trainer Kits PC Hardware Trainer Kits 4 Nos. 32500.00 130000.00 69 L.C.D. Projector (latest model) L.C.D. Projector (latest model) 1 95600.00 95600.00 Spares for PC assembling Motherboards, Hard Disk Spares for PC assembling Motherboards, Drives, RAM, Optical Mouses, Graphic Cards, LAN Hard Disk Drives, RAM, Optical Mouses, Cards, Cabinets, SMPS, Keyboards, printer Graphic Cards, LAN Cards, Cabinets, SMPS, 70 cartridges, VGA cables, Power Cables, SATA Cables Keyboards, printer cartridges, VGA cables, 1 No. 78900.00 78900.00 (power and data), IDE Cables, etc, as per Power Cables, SATA Cables (power and requirement data), IDE Cables, etc, as per requirement 4441735.00 Pages 4 of 4 PROJECT : Vocational Training Improvement Project (VTIP) for Upgradation of Govt. Industrial Training Institute, Tura, Meghalaya, during Financial Year 2011-12 PACKAGE -3 MEASURING INSTRUMENTS TRADE SL.N PARTICULARS SPECIFICATION QNTY UNIT RATE AMOUNT O I II III IV V VI VII VIII DRAUGHTSMAN 1 Radius curve metric-3 mm to 15 mm Radius curve metric-3 mm to 15 mm 4 Nos 540.00 2160.00 (CIVIL) 2 Clinograph wooden 18 cm Clinograph wooden 18 cm 1 Nos 820.00 820.00 3 Tracing table with plate glass 1250 x 900 cms Tracing table with plate glass 1250 x 900 cms 1 Nos 27850.00 27850.00 4 Printing frame 45 cm X 60 cm & 80 cm x 60 cm Table drafting for boards 1 Nos 16500.00 16500.00 5 Weighting triangle with tape 1250 x 900 cms Weighting triangle with tape 1250 x 900 cms 2 Nos 5200.00 10400.00 6 Pastle and mortar-Porcelain 3 mm, 6mm, 12 mm, 18 Pastle and mortar-Porcelain 3 mm, 6mm, 12 mm, 2 Nos 2750.00 5500.00 mm 18 mm Levelling staff 4 meters reading to 5 mm telescopic Levelling staff 4 meters reading to 5 mm telescopic 7 2 Nos 5420.00 10840.00 type type 8 Prismatic compass with stand Prismatic compass with stand 2 Nos 4100.00 8200.00 DRAUGHTSMAN 1 Print Trimmer 1050 mm cutting edge Print Trimmer 1050 mm cutting edge 1 Nos 4250.00 4250.00 (MACHANICAL) 2 OHP Should be provided in each class room OHP Should be provided in each class room 1 Nos 35000.00 35000.00 3 L.C.D. Projector (Optional) L.C.D. Projector (Optional) 1 Nos 98650.00 98650.00 4 White board for using L.C.D projector (Optional) White board for using L.C.D projector (Optional) 1 Nos 8900.00 8900.00 SURVEYOR 1 Black Board with Easel Black Board with Casel 1 Nos 12500.00 12500.00 2 Cup Board (Major) Cup Board (Major) 8 Nos 12500.00 100000.00 3 Computing scale two hectares Computing scale two hectares 4 Nos 1760.00 7040.00 4 Computing scale five hectares Computing scale five hectares 4 Nos 1820.00 7280.00 5 Fire Extinguisher Fire Extinguisher,9 ltr 2 Nos 9850.00 19700.00 6 Proportionate compass Proportionate compass 16 Nos 620.00 9920.00 7 Plan meter (Digital) Plan meter (Digital) 2 Nos 95600.00 191200.00 8 Prismtic compass Prismtic compass 5 Nos 4650.00 23250.00 9 Survey platting scales with off set bit ( 8 in a set) Survey platting scales with off set bit ( 8 in a set) 16 Nos 625.00 10000.00 10 Tapes 0.00 a) Mettallic tape 30m Mettallic tape 30m 10 Nos 880.00 8800.00 b) Mettallic tape 20m Mettallic tape 20m 10 Nos 780.00 7800.00 c) Steel tape 30m Steel tape 30m 2 Nos 1350.00 2700.00 Pages 1 of 2 PROJECT : Vocational Training Improvement Project (VTIP) for Upgradation of Govt. Industrial Training Institute, Tura, Meghalaya, during Financial Year 2011-12 PACKAGE -3 MEASURING INSTRUMENTS I II III IV V VI VII VIII SURVEYOR d) steel Band 30m & 20m d) steel Band 30m & 20m 2 Nos 2400.00 4800.00 11 a) Theodolite transit Theodolite transit 4 Nos 31200.00 124800.00 b) Micrometer Theodolite transit Micrometer Theodolite transit 1 295000.00 295000.00 12 Traverse staff (Survey of India ) Traverse staff (Survey of India ) 1 Nos 6620.00 6620.00 13 Rules Ebonite plain for drawing lines Rules Ebonite plain for drawing lines 16 Nos 750.00 12000.00 14 Wooden set squares Tee Square and compass for Wooden set squares Tee Square and compass for 1 set 1290.00 1290.00 black board work black board work CARPENTRY 1 Tape measuring steel,25 ft. Steel measuring tape 20 metres 1 No 690.00 690.00 2 Compass wing 12� Compass wing 12� 8 Nos 380.00 3040.00 3 Trammel tramel 10" 2 Nos 1660.00 3320.00 1080820.00 Pages 2 of 2