E4362 v2 REPUBLIC OF MALAWI Ministry of Agriculture and Food Security Agricultural Sector Wide Approach – Support Project – Additional Financing PEST MANAGEMENT PLAN DRAFT FINAL REPORT Ministry of Agriculture and Food Security Capital Hill P O Box 30134 Capital City Lilongwe 3 MALAWI January 2012 Updated November 2013 CONTENTS CONTENTS ................................................................................................................................I LIST OF ACRONYMS ........................................................................................................... III EXECUTIVE SUMMARY ...................................................................................................... V CHAPTER ONE: INTRODUCTION AND BACKGROUND .............................................. 7 1.1 THE NATIONAL CONTEXT .................................................................................... 7 1.2 THE AGRICULTURE SECTOR ............................................................................... 7 1.3 THE AGRICULTURAL SECTOR WIDE APPROACH SUPPORT PROJECT (ASWAP-SP) ......................................................................................................................... 8 1.4 PROJECT DEVELOPMENT OBJECTIVE ............................................................... 9 1.5 PROJECT COMPONENTS AND ADDITIONAL ACTIVITIES ........................... 10 1.6 PROJECT IMPLEMENTING AGENCY ................................................................. 11 1.7 PROJECT COST ESTIMATES ................................................................................ 12 1.8 PROPOSED PROJECT ADMINISTRATION AND MANAGEMENT STRATEGY 12 1.9 INTEGRATED PEST MANAGEMENT ................................................................. 13 1.10 JUSTIFICATION OF THE INTEGRATED PEST MANAGEMENT PLAN ..... 14 1.11 METHODOLOGY FOR PREPARATION OF THE INTEGRATED PEST MANAGEMENT PLAN ..................................................................................................... 14 1.11.1 FIELD INVESTIGATIONS, CONSULTATIONS AND LITERATURE REVIEW .......................................................................................................................... 14 1.12 FORMAT OF THE INTEGRATED PEST MANAGEMENT PLAN .................. 14 CHAPTER TWO: PEST MANAGEMENT POLICY AND LEGAL FRAMEWORK ...... 16 2.1 AGRICULTURE AND PEST MANAGEMENT IN MALAWI.............................. 16 2.2 PEST MANAGEMENT (OPERATIONAL POLICY 4.09) .................................... 17 2.3 PRINCIPLES IN SELECTING PESTICIDES ......................................................... 18 2.4 PESTICIDES TO BE ACCEPTABLE TO THE ASWAP - SP ............................... 18 2.5 PESTICIDES MANAGEMENT: LEGISLATION AND REGISTRATION........... 19 2.5.1 INTERNATIONAL POLICIES......................................................................... 19 2.5.2 NATIONAL POLICIES ........................................................................................ 19 2.6 USE OF NON-CHEMICAL PLANT PROTECTION METHODS ......................... 21 2.7 ADVANTAGES OF INTEGRATED PEST MANAGEMENT ............................... 23 CHAPTER THREE: STEPS IN SETTING UP INTEGRATED PEST MANAGEMENT. 25 3.1 IDENTIFY THE IMPLEMENTATION TEAM....................................................... 25 3.2 DECIDE ON THE SCALE OF IMPLEMENTATION ............................................ 25 3.3 REVIEW AND SET MEASURABLE OBJECTIVES FOR THE IPMP ................. 25 3.4 ANALYSE CURRENT HOUSEKEEPING, MAINTENANCE AND PEST CONTROL PRACTICES .................................................................................................... 26 3.5 ESTABLISH A SYSTEM OF REGULAR IPM INSPECTIONS ............................ 26 3.6 DEFINE THE TREATMENT POLICY SELECTION ............................................ 27 3.7 ESTABLISH COMMUNICATION PROTOCOLS ................................................. 27 3.8 DEVELOP FARMER TRAINING PLANS AND POLICIES ................................. 27 3.9 TRACK PROGRESS AND REWARD SUCCESS .................................................. 27 CHAPTER FOUR: IMPACTS OF PEST MANAGEMENT PRACTICES......................... 29 4.1 POSITIVE IMPACTS OF CHEMICAL PESTICIDES ........................................... 29 4.2 NEGATIVE IMPACTS OF CHEMICAL PESTICIDES ......................................... 29 4.3 POSITIVE IMPACTS OF NON CHEMICAL PESTICIDE .................................... 31 4.3.1 POSITIVE IMPACTS OF BIOLOGICAL CONTROLS .................................. 31 4.3.2 POSITIVE IMPACTS OF MECHANICAL METHODS ................................. 32 i 4.3.3 POSITIVE IMPACTS OF MANUAL METHODS .......................................... 32 4.4 NEGATIVE IMPACTS OF NON CHEMICAL PESTICIDES ............................... 32 4.4.1 NEGATIVE IMPACTS OF BIOLOGICAL CONTROLS ............................... 32 4.4.2 NEGATIVE IMPACTS OF MECHANICAL METHODS ............................... 33 4.4.3 NEGATIVE IMPACTS OF MANUAL METHODS ........................................ 33 4.5 POSITIVE IMPACTS OF IPM................................................................................. 33 4.2 COMMON MAIZE PEST PROBLEMS AND RECOMMENDED IPM PRACTICES ........................................................................................................................ 34 CHAPTER FIVE: PEST MANAGEMENT AND MONITORING PLANS ....................... 37 5.1 PEST MANAGEMENT PLAN ................................................................................ 37 5.2 PEST MONITORING PLAN ................................................................................... 37 CHAPTER 6: CAPACITY AND TRAINING NEEDS .................................................... 49 FOR SUCCESSFUL IMPLEMENTATION OF THE IPMP .................................................. 49 6.1 CAPACITY NEEDS ................................................................................................. 49 REFERENCES ........................................................................................................................ 54 APPENDICES ......................................................................................................................... 55 APPENDIX 2.1: INTERNATIONALLY ACCEPTED STANDARDS ON PESTICIDES 55 APPENDIX 2.2: PESTICIDES FOR REGISTRATION CONSIDERATION IN MALAWI 63 ii LIST OF ACRONYMS ADD Agricultural Development Division ADMARC Agriculture Development and Marketing Corporation ADP-SP Agriculture Development Program – Subsidy Program AEDC Agriculture Extension Development Coordinator AEDO Agriculture Extension Development Officer AEZ Agricultural Ecological Zones AF Additional Financing AGRES Agriculture Gender Roles and Extension Support Services AISP Agriculture Input Subsidy Program ASWAp Agricultural Sector Wide Approach ASWAp-SP Agricultural Sector Wide Approach Support Project ATCC Agricultural Technology Clearing Committee AVO Agriculture Veterinary Officer CAADP Comprehensive Africa Agriculture Development Program CFA Core Function Analysis CLRCO Chief Lands Resources Conservation Officer, CPM Commission on Phytosanitary Measures CSA Common Services Assessment DADO District Agriculture Development Officer DAES Department of Agricultural Extension Services DAHLD Department of Animal Health and Livestock Development DEA Director of Environmental Affairs DEC District Executive Committee DHS Demographic and Health Survey EA Extension Area EAD Environmental Affairs Department EIA Environmental Impact Assessment EMC Executive Management Committee EMP Environmental management plan EPA Extension Planning Area ESIA Environmental and Social Impact Assessment ESMF Environmental and Social Management Framework EU European Union FAO Food Agriculture Organisation GDP Gross domestic Product GoM Government of Malawi IDA International Development Association IGA Income Generating Activities IHS2 Integrated Household Survey 2 IMF International Monitory Fund IPM Integrated Pest Management IPMP Integrated Pest Management Plan IPMMP Integrated Pest Management and Monitoring Plan IPPC International Plant Protection Convention ISCRAL Scheme for the Conservation and Rehabilitation of African Lands ISP Input Subsidy Program ISPM International Standards for Phytosanitary Measures iii LHTC Land Husbandry Training Centre LRCO Land Resources and Conservation Officer MAWTCO Malawi Agricultural Warehousing and Trading Company MBS Malawi Bureau of Standards MDTF Multi-Donor Trust Fund MGDS Malawi Growth and Development Strategy MoAFS Ministry of Agriculture and Food Security MTPW Ministry of Transport and Public Infrastructure MPRS Malawi Poverty and Reduction Strategy NAC National AIDS Commission NHBG National Herbarium and Botanic Gardens NRCM National Research Council of Malawi NCE National Council for the Environment NEAP National Environmental Action Plan OPC Office of the President and Cabinet PCB Pesticides Control Board PDO Project Development Objective PLRCO Principal Land Resources Conservation Officer RA Roads Authority SADC Southern African Development committee SALRCO Senior Assistant Land Resources and Conservation Officer SAFEX South African Commodity Exchange SLRCO Senior Land Resources Conservation Officer SPGI Sustainable Productivity Growth Initiative SWAp Sector Wide Approach TCE Technical Committee on the Environment WB World Bank iv EXECUTIVE SUMMARY Agriculture is the single most important sector of the Malawi economy, contributing about 38% of value-added to GDP, employing 85% of the workforce, and contributing 80% of foreign exchange earnings in 2006. Agriculture continues to be the primary source of livelihood for the estimated 80% of the country’s poor who are based in rural areas. Sustained improvements in agricultural productivity and stable food supplies remain essential for reducing high rates of malnutrition and poverty in Malawi. The development objective of the ASWAp - Support Project (ASWAp-SP) is to improve the effectiveness and sustainability of investments in the agricultural sector, aimed at food security and agriculture-led economic growth. The project will strengthen (i) institutional capabilities necessary to develop and implement a harmonized and aligned investment framework leading towards a full-fledged SWAp in the agricultural sector; (ii) land, water and nutrient use efficiency of maize based rain-fed cropping systems; and (iii) resilience of the maize supply system to cope with climate and market induced risks and shocks. The project is already financed by an IDA credit, a GEF Grant and a Kingdom of Norway Grant. A first additional financing (AF1) was approved in March 2012 to respond to the request from the Government of Malawi (GoM). A second additional financing (AF2) is proposed based on a Multi-Donor Trust Fund (MDTF) established to pool contributions from various donors as a joint effort to improve harmonization, alignment and donor coordination in the agricultural sector in Malawi. The Bank is the administrator of the MDTF. The core concept is to reduce the number of agricultural projects with similar objectives by jointly support the existing ASWAp-SP which is implemented using country systems by the Ministry of Agriculture and Food Security (MoAFS). The breakdown of contributions from the donors to the MDTF is as follows: European Union (28,890,000 Euros); Royal Norwegian Ministry of Foreign Affairs (220,000,000 Norwegian Kroners); United Kingdom’s Department for International Development (14,175,000 British Pounds); Department of Foreign Affairs and Trade of the Republic of Ireland (14,000,000 Euros); Flanders International Cooperation Agency (5,300,000 Euros); and United States Agency for International Development (US$2.5 million). The ASWAp-SP has four components: Component 1: Institutional Development, will strengthen the capacity of the MoAFS to develop and implement systems for management of the sector and to establish a Sector Wide Approach (SWAp); Component 2: Sustainable Smallholder Productivity Growth, is aimed at sustainable increase of land, water and nutrient use efficiency, in maize based smallholder production systems; Component 3: Project Coordination is aimed at ensuring efficient use of resources, in accordance with the project’s objectives and procedures and, Component 4 Improvement and maintenance of unpaved rural roads. The objective of AF2 is to scale up on-going activities with particular attention to: (a) Strengthening MoAFS administrative systems, particularly at the district level with a stronger focus on monitoring and evaluation systems; and strengthening MoAFS's capacity to implement the ASWAp; (b) Enhancing FISP organization and implementation, monitoring and evaluation, with a stronger focus on maize and legumes seeds availability; (c) Increasing the nationwide coverage of research and extension activities to reach out to more farmers and to increase FISP payoffs and sustainable impact on smallholders; and (d) Improving the efficiency of agricultural research and extension services while promoting a more pluralistic approach to delivering these services. v In addition, the AF2 will also help develop the following additional activities: (a) Diversification of the maize-based production systems by: (i) extending the current research and extension approach to increase the adoption rate of selected technologies, diversified crops (cereals, roots and tubers, pulses and leguminous, agro-forestry products, etc.) and livestock production by farmers; and (ii) improving crop production and marketing, and ensuring availability of sufficient certified seeds to meet increasing demand both within and outside of FISP; (b) Improve the agricultural business environment and promote agribusiness partnerships in support of agricultural diversification with a more market oriented agriculture and integration into agricultural value chains and regional markets; and (c) Improve market access to the most productive agricultural areas through the improvement and sustainable maintenance of feeder roads. Part of the proceeds of the ASWAp-SP will be directed towards the development of an Integrated Pest Management Plan (IPMP), which is fundamentally a progressive environmentally friendly approach to pest management. The IPMP ensures safety, efficiency, and amounts to pragmatically wise pest management acumen. Consultation with a wide range of people and institutions were conducted and revealed that inadequate funding is the primary challenge to the establishment of Integrated Pest Management (IPM) Systems. This IPMP provides steps towards the establishment of IPM approaches to the project impact districts as follows: 1. Identification of the implementation team; 2. Deciding on scale of implementation; 3. Setting goals and measurable objectives for the IPM program; 4. Analysis of current housekeeping, maintenance and pest control practices; 5. Establishing a systems for regular IPM inspections; 6. Defining treatment selection policy; 7. Establishing communication protocols; 8. Developing worker training plans and policies; and 9. Tracking progress and rewarding success This IPMP investigates several alternatives for pesticide control, including biological treatment, mechanical and manual methods with the ultimate objective of reducing the application of chemical pesticides and replacing them with more environmentally friendly options. As part of the ASWAp-SP’s objectives to strengthen MoAFS’ capacities, AF2 will provide adequate resources to deliver additional training that extend to 5 new districts, namely Karonga, Kasungu, Machinga, Nsanje and Phalombe. More specifically, provisions have been made to deliver more training on IPM at the grassroots level to front line staff and farmers. vi CHAPTER ONE: INTRODUCTION AND BACKGROUND 1.1 THE NATIONAL CONTEXT Malawi has a population of about 13 million and is one of the poorest countries in the world; with average per capita income of only US$170. 52 percent of the population lives below the poverty line (Integrated Household Survey2004/2005); and poverty rates have only marginally improved since the 1997/98 household survey. GDP per capita incomes increased at only one percent annual rate between 1996 and 2005. One of the consequences of the prevailing poverty situation is persistently high malnutrition. Approximately 43% of the children are stunted, and 22% are underweight. 1.2 THE AGRICULTURE SECTOR Agriculture remains the main source of growth and exports in Malawi. With 85 percent of the population residing in the rural areas, the sector accounts for over 80 percent of the country’s employment, over one-third of GDP, and about 80 percent of merchandise exports. The primary staple food for most of these households is maize. Over 70 percent of all farmers in the country cultivate less than one hectare (ha) and a significant number of these farmers still struggle to produce enough food to meet their annual consumption requirements. The country continues to experience dry spells, especially in the southern region, rendering a significant number of households in these regions perpetually food insecure. In areas where production has been good, poor roads have often prevented the marketing of surpluses. With the current low prices in the tobacco market, Malawi is facing a dramatic decrease in export revenues, leading to severe foreign exchange constraints, while leaving many tobacco farmers in need of alternative sources of cash income. There is thus an urgent need to help the country to diversify the maize and tobacco-based production systems, and to encourage traditional (often subsistence) smallholder farmers to engage in more market oriented agriculture, through better market access and integration into agricultural value chains. High population density and poverty have led to significant pressure and degradation of Malawi’s natural resource base (land, water and forests). The growing population increases the land area under cultivation and exploits forests and woodlands for firewood and charcoal production. Deforestation, resulting in increased incidences of soil erosion, run-off and flash floods, and sedimentation are serious threats to the environment and natural resource base. These problems are a direct result of unsustainable land use and management practices, and increased use of chemical fertilizers without complementary soil conservation measures. Malawi’s agricultural development strategy is detailed in the Agricultural Sector Wide Approach (ASWAp) investment plan drafted by the Government of the Republic of Malawi (GoM) together with its Development Partners. The largest and most costly investment program in the sector is the Farm Input Subsidy Programme (FISP) targeted towards the poorer households, to attain food security. Notwithstanding the success of FISP, rates of malnutrition and especially stunting levels among children, remain high. 7 Box 1 – The Farm Input Subsidy Program in brief  Smallholder family farms (1.4 million down from 1.6 million in 2010/11) receive 100 kg of fertilizer, 5 to 7.5 kg of maize seed, and 2 kg of legume seeds with a 90% subsidy. Last year 90,000 tons of fertilizer, and 17,000 tons of maize seed, were distributed through vouchers at a total cost of approximately K25 billion ($175 million). This year, 140,000 tons of Urea and NPK are distributed by the government, and 90,000 tons by private suppliers.  Fertilizer subsidy vouchers have to be redeemed at parastatal fertilizer depots owned by the Agricultural Development and Marketing Corporation (ADMARC) and the Smallholder Farmers’ Fertilizer Revolving Fund of Malawi (SFFRFM). The seed vouchers can be redeemed at any retail agro-dealer shop.  Delivery of fertilizers, commissioned for 2011/12 cropping season has been very slow due to difficulty for suppliers to access letters of credit required by international suppliers and due to fuel shortage hampering fertilizer delivery to rural markets. With extra-support from bilateral donors, the GoM has now managed to deliver 85% of the fertilizer to rural distribution points.  12,730 tons of maize seed maize and 2,830 tonnes of legumes have been distributed.  The DCAFS members helped the Government to finalize a medium term plan to improve the design, implementation and monitoring of the program. The proposed additional financing and MTDF to the on-going ADP-SP will support the implementation of this plan. 1.3 THE AGRICULTURAL SECTOR WIDE APPROACH SUPPORT PROJECT (ASWAP-SP) The main development goal of the Government is food security. This goal is described in the Malawi Growth and Development Strategy (MGDS) in terms of two medium term outcomes: i. food is available in sufficient quantities and qualities through domestic production or imports and; ii. all Malawians have, at all times, physical and economic access to sufficient nutritious food required to lead a healthy and active life. Both these objectives have been prioritized in the newly defined Agricultural Sector Wide Approach (ASWAp) recently prepared and adopted under the CAADP process. The ASWAp is now the well-recognised overall framework for investments across the agriculture sector. Co-financed by the World Bank, the GEF and the Kingdom of Norway, Agricultural Development Programme – Support Project (ADP-SP) has played a crucial role in supporting the preparation of the ASWAp and now its effective implementation. As such, the project has been renamed Agricultural Sector Wide Approach Support Project (ASWAp-SP). The ASWAp-SP has four components: (i) Institutional development and capacity building in preparation for a SWAp in agriculture; (ii) Sustainable food security, to increase the land, water and nutrient use efficiency of maize based cropping systems and improve payoffs to the FISP, and to increase the resilience of the maize supply system to climate induced risks and shocks; (iii) Project coordination; and (iv) Improvement and maintenance of unpaved rural roads. The original ASWAp-SP was financed by an IDA credit of SDR 19.5 million (US$32 8 million equivalent), and an additional IDA credit (AF1) of SDR 19.4 million (US$30 million equivalent). The original project was co-financed by a grant from the Global Environment Fund (GEF) of US$5.8 million (fully blended), and a grant from the Kingdom of Norway of NKr 50 million (approximately US$10 million equivalent). The original Project was approved by the Board on June 24, 2008 and declared effective on December 9, 2009. The AF1 was approved on March 22, 2012, became effective on December 14, 2009, and is due to close on June 30, 2015. AF2 will be financed by a Multi-Donor Trust Fund (MDTF) established to pool contributions from various donors as a joint effort to improve harmonization, alignment and donor coordination in the agricultural sector in Malawi. The Bank is the administrator of the MDTF. The core concept is to reduce the number of agricultural projects with similar objectives by jointly support the existing ASWAp-SP which is implemented using country systems by the Ministry of Agriculture and Food Security (MoAFS). European Union (28,890,000 Euros) Royal Norwegian Ministry of Foreign Affairs (220,000,000 Norwegian Kroners); United Kingdom’s Department for International Development (14,175,000 British Pounds); Department of Foreign Affairs and Trade of the Republic of Ireland (14,000,000 Euros); Flanders International Cooperation Agency (5,300,000 Euros); and United States Agency for International Development (US$2.5 million). The objective of AF2 is to scale up on-going activities with particular attention to: (a) Strengthening MoAFS administrative systems, particularly at the district level with a stronger focus on monitoring and evaluation systems; and strengthening MoAFS's capacity to implement the ASWAp; (b) Enhancing FISP organization and implementation, monitoring and evaluation, with a stronger focus on maize and legumes seeds availability; (c) Increasing the nationwide coverage of research and extension activities to reach out to more farmers and to increase FISP payoffs and sustainable impact on smallholders; and (d) Improving the efficiency of agricultural research and extension services while promoting a more pluralistic approach to delivering these services. In addition, the AF2 will also help develop the following additional activities: (a) Diversification of the maize-based production systems by: (i) extending the current research and extension approach to increase the adoption rate of selected technologies, diversified crops (cereals, roots and tubers, pulses and leguminous, agro-forestry products, etc.) and livestock production by farmers; and (ii) improving crop production and marketing, and ensuring availability of sufficient certified seeds to meet increasing demand both within and outside of FISP; (b) Improve the agricultural business environment and promote agribusiness partnerships in support of agricultural diversification with a more market oriented agriculture and integration into agricultural value chains and regional markets; and (c) Improve market access to the most productive agricultural areas through the improvement and sustainable maintenance of feeder roads. 1.4 PROJECT DEVELOPMENT OBJECTIVE The development objective of the ASWAp-SP is to improve the effectiveness and sustainability of investments aimed at food security and the agriculture led economic growth in the agricultural sector. The ASWAp-SP will: (a) Strengthen institutional capabilities necessary to further develop and implement a harmonized and aligned investment framework, leading to a full-fledged SWAp in the agricultural sector; 9 (b) Improve land, water and nutrient use efficiency of maize based rain-fed cropping systems, supported by the Government’s Input Subsidy Program and; (c) Improve the resilience of the maize supply system to cope with climate and market induced risks and shocks. Success in achieving the objective will be measured by, among other things, increased sustainable productivity of maize based cropping systems, resulting from improved management of land, rainwater and nutrients. 1.5 PROJECT COMPONENTS AND ADDITIONAL ACTIVITIES The programme has four components and the proposed changes consist of scaling up existing activities and adding new ones to increase the impact of the Project as described thereafter: (a) Component 1: Institutional Development, will strengthen the capacity of the MoAFS to develop and implement systems for management of the sector, and establishment of a Sector Wide Approach (SWAp); AF2 will continue improving the capacity of MoAFS’s staff in planning and budgeting, in internal communication and coordination, in policy making, in sector coordination, and in monitoring and evaluation of public investments in the agricultural sector. The leadership of the Ministry on the overall sector investment coordination should be further strengthened to improve the efficiency of public investments in agriculture. New studies will be carried out to strengthen the knowledge base and monitoring of the agricultural sector and to ensure the production of reliable and timely published agricultural statistics (using a range of methodologies based on a combination of satellite imagery and field surveys to improve the existing Ministry’s APES1). Under the land administration subcomponent, the Project will further support the policy decision making process by providing up-to-date information and analyses on land management and land use planning. This will include the development of a land information system to help the Ministry of Lands and Housing ensure and secure a proper recording of deeds, with a specific objective of monitoring the evolution of land use under Estates management. (b) Component 2: Sustainable Smallholder Productivity Growth (Appendix 1.1) is aimed at sustainable increase of land, water and nutrient use efficiency, in maize based smallholder production systems and; Under AF2, the objective will be to look beyond food security by not only supporting the existing and generalized maize-based farming system, but also encouraging diversification and marketing. This will translate in developing expanded and new research and extension activities to increase the adoption rate of selected technologies, diversified crops and livestock productions by farmers. The component will expand the coverage and improve the quality of extension activities to reach out to more farmers by promoting innovative and more pluralistic extension methodologies. As a result of the scaled-up agricultural extension program, it is expected that smallholder farmers will increase their agricultural productivity and outputs, while diversifying from their maize-based subsistence farming practices. Further support will be provided to the design, programming and implementation of the Farm Input Subsidy Program (FISP), including support to improving the efficiency of 1 Agricultural Production Estimates Survey 10 the FISP in terms of procurement, tracking of fertilizer and seeds distribution and implementation time line. The Project will support the MoAFS in revisiting the overall design, objectives and implementation modalities of the FISP, to strengthen its impact on the ground. The approach will be based on analysing various options for modernizing the FISP and to better articulate its content and targeting with complementary social protection programs. (c) Component 3: Project Coordination is aimed at ensuring efficient use of resource, in accordance with the project’s objectives and procedures. AF2 will provide further support to the ASWAp secretariat within the Ministry of Agriculture which has a critical role in coordinating the different Departments in charge of the execution of ASWAp-SP activities. Additional support will consist of technical studies, consultancies and technical assistance, the details of which will be determined in the course of project implementation. As per the recommendations of the last implementation support mission, the additional support will also be provided through technical assistance to speed up implementation of activities, financial management and procurement processes, as well reporting of activities. (d) Component 4: Improvement and maintenance of unpaved rural roads to improve market access of the most productive agricultural areas through the improvement and sustainable maintenance of feeder roads. The scope of the road improvement and maintenance will be expanded from five to ten Districts, and 780 kilometers of roads will be improved. In addition, the Project will strengthen the capacity of the implementing bodies including Local Authorities and local contractors in the target districts. Rural roads maintenance systems will be established by rolling out the existing “maintenance clubs� methodology which employs groups from the community to carry out the work (a 40% participation of women will be encouraged). Resettlement costs will arise when the need for compensation for any land, crops or buildings that are identified for appropriation through the social and environmental screening process. Compensation will be defined in the Resettlement Action Plans (RAPs) that will be prepared for roads where the need for resettlement is triggered. GoM will finance the maintenance of the rehabilitated rural roads and compensation payments under RAPs. 1.6 PROJECT IMPLEMENTING AGENCY The project implementing agency is the Ministry of Agriculture and Food Security (MoAFS) - formerly the Ministry of Agriculture and Food Security (MoAFS) - which is developing this prioritised sectoral programme, the Malawi Agricultural Sector Wide Approach. The Ministry’s contact address is The Ministry of Agriculture, Irrigation and Water Development. Capital Hill Government Offices, P O Box 30134, Lilongwe 3, Malawi 11 1.7 PROJECT COST ESTIMATES The total project cost is approximately US$136.5 million; US$53.3 million from the original project and US$83.2 million from the additional financing. The project financing plan is as provided in Table 1.1. The project financing plan is as follows: IDA MDTF Components by Financiers (US$ Million) GoM Total Credit AF1 AF2 1- Institutional Development and 15.0 3.0 22.0 40.0 Capacity Building - -- - 2- Sustainable food security, agricultural 3.4 37.6 2.0 65.0 108.0 growth and diversification 3- Project Coordination - 0.7 - 10.3 11.0 4- Improvement and maintenance of 1.5 - 25.0 22.7 49.2 unpaved rural roads Total Costs for Recipient executed 4.9 53.3 30.0 120.0 208.2 activities Bank Executed Trust Fund for enhanced - - - 4.0 4.0 supervision Customized Cost Recovery Arrangements - - - 3.5 3.5 Total Project Costs 4.9 53.3 30.0 127.5 215.7 1.8 PROPOSED PROJECT ADMINISTRATION AND MANAGEMENT STRATEGY Consistent with the original project design and approach, the ASWAp-SP will remain fully executed through the existing public administration organizational structures in Malawi. It will be integrated into the now approved official ASWAp management structure as shown in diagram 1. The executive management committee (EMC) will act as the steering committee for the ASWAp-SP. While the Ministry of Industry and Trade (MoIT) is already part of the committee; and the Ministry of Transport and Public Works (MTPW) and the Ministry of Lands, Housing and Urban Development (MoLHUD) are incorporated as new members. The EMC will have overall managerial decision making responsibility for the ASWAp-SP, including approval of work plans and budgets; and review of quarterly and annual reports. The ASWAp sector working group will serve as a forum for dialogue and consultation with private sector, farmers’ associations and civil society organizations. Technical working groups are established as instances to address specific technical and implementation issues. The Executive Management Committee is supported by the ASWAp Secretariat located in the MoAFS. The ASWAp Secretariat will, inter alia, consolidate work plans, liaise with development partners; convene meetings of the relevant Working Groups and Management Committee; ensure timely reporting; and coordinate the annual progress review. 12 At district level, formal responsibility for delivery of outputs will rest with the District Commissioner who will be assisted by the Directorates for Agriculture, Natural Resources and Irrigation Within these directorates the District Agricultural Development Officers (DADO) and District Irrigation Officers (DIO) will carry out:  Planning and monitoring & evaluation will be done by the districts, working in conjunction with the MoAFS (through the Agricultural Development Divisions) and the participating ministries;  Implementation will be principally by the districts, with support from the Agricultural Development Divisions; and  Consultation with stakeholders (including farmers, the private sector, the development partners, civil society, non-government organizations and other non- state actors) will be organized by the MoAFS and the districts. 1.9 INTEGRATED PEST MANAGEMENT Definitions have been fronted over the years to describe Integrated Pest Management (IPM). In 1967, FAO defined IPM as a pest management system which utilizes all suitable techniques and methods in as compatible manner as possible, and maintains the pest population at levels below those causing economic injury. Key elements of an IPM program are: (i) Use of available, suitable, and compatible methods which includes resistant varieties, cultural methods (planting time, intercropping and crop rotation); biological control, safe pesticides etc to maintain pests below levels that cause economic damage and loss; (ii) Conservation of the ecosystem to enhance and support natural enemies and pollinators (iii) Integrating the pest management strategies in the farming system (iv) Pests and crop loss assessments The following are key preconditions for an IPM approach: (a) Understanding of the ecological relationships within a farming system (crop, plant, pests organisms and factors influencing their development; (b) Understanding of economic factors within a production system (infestation: loss ratio, market potential and product prices); (c) Understanding of socio-cultural decision-making behavior of the farmers (traditional preferences, risk behavior); (d) Involvement of the farmers in the analysis of the pest problems and their management (e) Successive creation of a legislative and agricultural policy framework conducive to a sustainable IPM strategy (plant quarantine legislation, pesticides legislation, pesticide registration, price policy) 13 1.10 JUSTIFICATION OF THE INTEGRATED PEST MANAGEMENT PLAN Due to drawbacks of reliance on pesticides, a crop protection approach (IPM) that is centred on local farmer needs and is sustainable, appropriate, environmentally safe and economic to use is needed. The requirement for adoption of IPM in farming systems is emphasized in the World Bank operational policy, WB OP 4.09, which supports safe, effective, and environmentally sound pest management aspects, such as the use of biological and environmental friendly control methods. 1.11 METHODOLOGY FOR PREPARATION OF THE INTEGRATED PEST MANAGEMENT PLAN 1.11.1 Field Investigations, Consultations and Literature Review The field investigations included visits to the project impact districts of Mwanza, Chikhwawa, Ntcheu, Salima and Chitipa. In addition, visits to the major agrochemical marketing companies in Lilongwe were undertaken. Consultations with various key stakeholders such as MoAFS, the Pesticides Control Board and the communities in the project impact districts were conducted. Key informant and farmer interview questionnaires were specifically developed as data collection tools to gather the relevant primary data required for developing the IPMP. Structured, semi-structured and open- ended interviews with farmers’ organizations,/farmers clubs and Agrochemical companies were also conducted. Literature review was undertaken to identify priority concerns on pests/diseases, the legislation; and use of pesticides as well as IPM initiatives currently being undertaken or envisaged. Various project, legislative, and policy documents have been reviewed including the following legal instruments: a) The World Bank Safeguard Policy on Pest Management, O.P. 4.09; b) Environment Management Act of 1996; c) FAO International code of Conduct on the Distribution and Use of Pesticides, 2002; d) Integrated Pest Management Framework for Kenya Agricultural Productivity and Agribusiness Project (IPMF-KAPAP), 2009; and e) Livestock Development and Animal Health Project - Pest Management Plan (Volume III) f) Bulletin of the World Health Organization, 66 (5): 545-551 (1988) 1.12 FORMAT OF THE INTEGRATED PEST MANAGEMENT PLAN The Integrated Pest Management Plan (IPMP) is presented in the in the following manner: 14 Chapter 1 provides a brief background of the ASWAp-SP, narrating the key elements of an IPM program to ensure that use of pesticides is sustainable, appropriate and environmentally safe. The Chapter also gives the objectives, basis and justification of preparing the IPMP. Chapter 2 gives a comprehensive exploration of Agriculture, and pest management in Malawi. The chapter proffers the key principles of selecting pesticides, the body of law regarding such selection, and acceptable pesticides under ASWAp-SP; Chapter 3 takes a highly technical approach, describing the systematic step by step road man to the implementation of an effective IPMP; Chapter 4 highlights the impacts of pest management practices, both positive, and negative. Furthermore the chapter conscientiously delves into the advantages of nonchemical pesticides; Chapter 5 focuses on the environmental management plan, accentuating the positive impacts of mechanical methods, the disadvantages of both biological controls and manual methods.; Chapter 6 presents an overview of the capacity needs, and punctuates the necessary training, in order to yield a successful implementation of a solid IPMP; Finally, Chapter 7 summarizes the budgetary and funding implications. 15 CHAPTER TWO: PEST MANAGEMENT POLICY AND LEGAL FRAMEWORK 2.1 AGRICULTURE AND PEST MANAGEMENT IN MALAWI Production of both crops and livestock in Malawi is limited by a number of factors, which include aspects of weather, low soil fertility, poor agronomic practices and the incidence of insect pests and diseases. The outbreaks of insect pests and diseases in Malawi are currently on the increase as they are known to cause crop losses of up to 30% (Coffman et al, 1992). Malawi, like most of the countries that depend on agriculture, uses some considerable amount of pesticides as one way of combating pest problems. The pesticides that are used in Malawi include insecticides, fungicides, herbicides, fumigants, nematocides, Acaricide and rodenticides. To some extent, other products such as growth regulators, repellents, molluscicides and parasiticides are also used. Recently some scientists have initiated the testing of some botanical plants to regulate pests. The major crops that are grown in Malawi, for which pesticides are used, include tobacco, sugarcane, coffee, maize, cotton and tea. Pesticides are used for these crops to prevent and control the various pests and diseases that attack them. Table 2.1 illustrates the estimated use of pesticides in Malawi by crop. Table 2.1 Pesticides use in Malawi for the Major Crops CROP ESTIMATED USE (% of total) Tobacco 40-50 Coffee 15-20 Sugarcane 10-15 Cotton 10 Tea 5 Maize 4 Source: Pesticides Control Board, 2004 Malawi does not manufacture pesticides. This means that all pesticides that are consumed in the country are imported. There are some chemical companies that import pesticides into the country and these in turn supply the pesticides to various stakeholders in both crops and livestock production. The most abundantly consumed products are insecticides, followed by herbicides and then fumigants, fungicides and rodenticides. Herbicides are mostly used in sugar plantations, whereas fumigants are mostly used in the tobacco industries. Insecticides are mostly used in field crops particularly maize. The major importers of pesticides in Malawi are: (a) Farmers Organizations; (b) Chemicals and Marketing; (c) Agricultural Trading Company (A.T.C); (d) Coffee / Tea Association of Malawi; (e) Sugar Corporation of Malawi (SUCOMA); and (f) Limbe Leaf 16 2.2 PEST MANAGEMENT (OPERATIONAL POLICY 4.09) Rural development and health sector projects have to avoid using harmful pesticides. A preferred solution is to use Integrated Pest Management (IPM) techniques and encourage their use in the whole of the sectors concerned. If pesticides have to be used in crop protection or in the fight against vector-borne diseases, the Bank-funded projects should include a Pest Management Plan (PMP), prepared by the borrower, either as a stand-alone document or as part of an Environmental Assessment. The procurement of any pesticide in a Bank-financed project is contingent on an assessment of the nature and degree of associated risks, taking into account the proposed use and the intended users. With respect to the classification of pesticides and their specific formulations, the Bank refers to the World Health Organization’s Recommended Classification of Pesticides by Hazard and Guidelines to Classification (Geneva: WHO 1994-95). The following criteria apply to the selection and use of pesticides in Bank-financed projects: (a) They must have negligible adverse human health effects; (b) They must be shown to be effective against the target species; (c) They must have minimal effect on non-target species and the natural environment. (d) The methods, timing, and frequency of pesticide application must aim to minimize damage to natural enemies; (e) Their use must take into account the need to prevent the development of resistance in pests. At a minimum, pesticide production, use and management should comply with FAO’s Guidelines for: i. Packaging and Storage; ii. Good Labeling Practice; and iii. Disposal of Waste Pesticide Containers on the Farm. The Bank does not finance formulated products that fall in WHO classes IA (extremely hazardous) and IB (highly hazardous), or formulations of products in Class II (Moderately hazardous), if (a) the country lacks restrictions on their distribution and use; or (b) they are likely to be used by, or be accessible to lay personnel, farmers, or others without training, equipment, and facilities to handle, store, and apply these products properly. The proposed project will trigger OP 4.09, since it will support post-harvest pest control, to minimise post-harvest pest damage from eroding crop productivity gained through the program’s improved technology adoption by farmers. However, procurement of pesticides will not be financed until it can be demonstrated that local capacity exists to adequately manage their environmental and social impacts, in compliance with OP 4.09 as described above. 17 2.3 PRINCIPLES IN SELECTING PESTICIDES Selection of pesticides, under the project implementation will be guided by the principle that requires the consideration of several pest management approaches of cultural, physical and biological measures before the application of chemical pesticides is considered necessary. The use of pesticides must be guided by the principles of cost efficiency, safety to humans, the bio-physical environment and effectiveness in controlling the pests. The selection will be made in accordance with the World Bank guidelines for the selection of pesticides (World Bank Operational Manual, GP 4.03) as follows: (i) Pesticides requiring special precautions should not be used if the requirements are not likely to be met. (ii) Approved list of pesticides, taking into consideration of: toxicity, persistence, user experience, local regulatory capabilities, type of formulation, proposed use, and available alternatives. (iii) Type and degree of hazard and availability of alternatives and the following criteria will be used to restrict or disallow types of pesticides under Bank loans: a. Toxicity: acute mammalian toxicity, chronic health effects, environmental persistence, and toxicity to non-target organisms; b. Registration status in the country and capability to evaluate long-term health and environmental impacts of pesticides. 2.4 PESTICIDES TO BE ACCEPTABLE TO THE ASWAP - SP The selection of pesticides to be acceptable under the project will be in line with (a) the World Bank Safeguard Policy OP 4.09 on pest management, and will depend on (b) the hazards and risks associated with pesticide use, and (c) the availability of newer and less hazardous products and techniques such as bio-pesticides. In addition to the toxic characteristics of the pesticide, the hazards associated with pesticide use depend on how the pesticides are handled. Precautions to minimize environmental contamination and excess human exposure are needed at all stages, from manufacture, packaging and labelling, transportation, and storage to actual use and final disposal of unused and contaminated containers. The guidelines Appendix 2.1 provide internationally accepted standards on pesticides to minimize the hazards associated with pesticide use. The use of pesticides under the project will be guided by the FAO Publication on International Code of Conduct on the Distribution and Use of Pesticides 1991; FAO Guidelines for the Packaging, Storage, Good Libelling Practice, Transportation and Disposal of Waste Pesticide and Pesticide Containers1985. 18 2.5 PESTICIDES MANAGEMENT: LEGISLATION AND REGISTRATION 2.5.1 International Policies 2.5.1.1 World Bank Operational Policy on Pest Management, OP 4.09 (1998) The Bank uses various means to assess pest management in the country and support integrated pest management (IPM) and the safe use of agricultural pesticides, economic and sector work, sectoral or project-specific environmental assessments, participatory IPM assessments, and adjustment or investment projects and components aimed specifically at supporting the adoption and use of IPM. In the Bank-financed agriculture operations, it advocates pest populations reduction through IPM approaches such as biological control, cultural practices, and the development and use of crop varieties that are resistant or tolerant to the pest. 2.5.1.2 International Plant Protection Convention of FAO (1952) The International Plant Protection Convention (IPPC) is an international treaty to secure action to prevent the spread and introduction of pests of plants and plant products, and to promote appropriate measures for their control. It is governed by the Commission on Phytosanitary Measures (CPM) which adopts International Standards for Phytosanitary Measures (ISPMs). 2.5.1.3 World Food Security and the Plan of Action of November 1996 This declaration seeks to secure effective prevention and progressive control of plant and animal pests and diseases, including especially those which are of trans-boundary nature, such as rinderpest, cattle tick, foot-and-mouth disease and desert locust, where outbreaks can cause major food shortages, destabilize markets and trigger trade measures; and promote concurrently, regional collaboration in plant pests and animal disease control and the widespread development and use of integrated pest management practices 2.5.2 National Policies Previously, there was no regulatory body to control importation and consumption of pesticides in Malawi. Although the amount of pesticides used in Malawi is generally low as compared to other countries, there has been a lot of abuse of these toxic substances. In the absence of a regulatory body, chemicals were just imported by some organizations, as it deemed necessary. As a result, there were more chemicals than actually required. This resulted into the build-up of pesticides products that became obsolete. The Ministry of Agriculture and Food Security conducted a survey in 1996/97 and subsequently in 1999/2000 crop seasons to take stock of pesticides. The survey revealed that some 127 tonnes and 112 tonnes of pesticides, for the two periods respectively, were of obsolete stocks. 2.5.2.1 The Pesticides Act, 2000 Upon realisation of the importance of having a Regulatory Body on the use of pesticides, the Pesticides Act, 2000 for Malawi was approved by Parliament. This Act enables Malawi to 19 have control on the import, export, manufacture, distribution, storage, disposal and use of pesticides. The establishment of the Pesticides Control Board (PCB) was accomplished and the office of the registrar is now in place. The Pesticides Regulations was gazetted on 22 February 2002, and this resulted in the enforcement of the law on 1 May 2002, with a grace period of 2 years and its launch took place on 21 November 2002. The enforcement of the law gives the following outputs / results: (a) Registration of all marketed pesticides in Malawi; (b) Registration of all pesticides according to the crops and the target pests and diseases; (c) Documentation of all import permits and licenses for selling and storage of pesticides; (d) Conducting stakeholders’ workshops to create awareness to the gen eral public on the Pesticides Act; (e) Encouragement on safe usage of pesticides; (f) Carrying out formulation control in collaboration with the Malawi Bureau of Standards; (g) Harmonization of pesticides registration through international bodies such as SEARCH; (h) Labelling of pesticides containers according international standards; and (i) Carrying out proper disposal of obsolete stock. The general goal of having the PCB is that all pesticides used in Malawi should be registered and that all importers and dealers should be licensed. The benefits from this are: 1. Only safe and effective pesticides will be marketed; 2. There will be less risk for farmers, consumers and the environment; 3. There will be higher export opportunities for agricultural products. 2.5.2.2 Pesticides Registration Process As the process of pesticides registration in Malawi continues, it is proposed that the following factors be taken into account: 1. Quantity of pesticides to be considered for registration in Malawi; 2. A list of candidate pesticides (pesticides for registration consideration) in Malawi is provided in Appendix 2.2; 20 3. Priority list and importance of pesticides by crop as supplied by organizations; 4. Risk assessment of pesticides for registration consideration; 5. Harmonization with the list of registered chemicals in SEARCH countries; 6. For the Registration of a “New Active ingredients and formulations’, Malawi will have to conduct at least one year of trials if product is registered in at least one SEARCH country. 7. If not registered in any SEARCH country, conduct trials for 2 years. Also include residue trials. Thereafter the test results must be submitted to the Malawi Agricultural Technology Clearing Committee (ATCC) for final assessment and recommendations to Pesticides Control Board for endorsement; and 8. The Malawi Bureau of Standards (MBS) must conduct pesticides residue and quality control tests on the formulations. 2.5.2.3 Pesticides storage, Distribution and Disposal The office of the Registrar is mandated to ensure that all registered and licensed pesticide dealers conform to the regulations for safe handling of the pesticides. That is, they should follow the “safety� guidelines on pesticides transportation, distribution, application, storage and disposal of pesticides. The Pesticides Control Board should ensure that all stakeholders observe safe handling of pesticides. The Registrar is mandated to make frequent checks in all premises where pesticides are stored to ensure safety. The Registrar is also mandated to take stock of obsolete chemicals in all premises. The PCB must advise the Malawi Government on how to dispose off obsolete stock. Disposal of obsolete stock will involve collecting all obsolete stock from all premises and may require arranging for incineration. The PCB should ensure that all stakeholders observe safe handling of pesticides. The registrar is mandated to make frequent checks in all premises where pesticides are stored to ensure safety. The Registrar is also mandated to take stock of obsolete chemicals in all premises. The PCB will advise the Malawi Government on how to dispose off obsolete stock. This will involve collecting all obsolete stock from all premises and arranging for incineration in properly assessed and designated sites. 2.6 USE OF NON-CHEMICAL PLANT PROTECTION METHODS Some of the main features of IPM involve the non-chemical methods of pest control: (a) Biological Controls 21 Biological controls are the use of natural enemies of crop pests, often called beneficials, which include parasites, predators and insect pathogens. Environmental friendly chemical interventions such as the use of semiochemicals; including pheromones and feeding attractants, biopesticides and specific and beneficial friendly insecticides are sometimes included among the biological controls; (b) Cultural and Crop Management Controls Tissue culture, disease-free seed, trap crops, cross protection, cultivation, refuge management, mulching, field sanitation, crop rotations, steam cleaning, trapping, freezing and intercropping are some of the cultural crop management controls that can be used; (c) Strategic controls Strategic controls include consideration of planting location, timing of planting and harvesting; and (d) Genetically based controls These include insect and disease resistant varieties/breeds and rootstock. In Malawi there exists some indigenous knowledge in plant protection. Some farmers have reported that they practice the use of botanical plants to control some insect pests and diseases. For example, leaves from the fish bean plant, Tephrosia vogelli have been used to control a number of pests in maize and beans. The neem leaves are used to prevent maize from weevils. Stemming from this knowledge, Malawian entomologists initiated various trials on using botanicals to control insect pests. A concoction of ash-50g; nicotine-50g; and 1/4bar soap- 25g has been recommended for the control of red spider mite (Tetranychus evance) on tomatoes. The use of Neem (Azadirachta indica A. juss), Fish beans (Tephrosia vogelli Hook F.), M’pungabwi (Sweet basil) have given promising results on the control of diamondback moth (Plutella xylostella (L) on crusiferus. Neem (Azadirachta indica A. juss) is also used to control root knot nematodes Meloidogyne species on bananas. Table 3.5 shows botanicals that are being tested for the control of various pests. Table 3.5: Botanicals being tested for the control of various pests Scientific Name Local Name Pest on which it is used Combretum ternifolium Kadale Storage pests Elephantorrhiza goetzei Chiteta Storage pests Cassia spp. Muwawani Storage pests Mucuna spp. Dema Storage pests Tephrosia vogelli Wombwe Storage pests / cabbage pests Neem Nimu Storage pests / vegetable pest Lasiosiphon kraussianus Katupe Storage pests - Katswatswata Storage pests - Kangaluche Storage pests Dicoma spp. Somphole Storage pests Other non-pesticide control methods being used in Malawi are biological control. Examples include: 22 (a) Apoanagyrus lopezzi on cassava mealy bug; (b) Teretrius nigrescens on Larger Grain Borer (Prostephamus truncates (Horn); (c) Cofesia flaripe on cereal stem borer (Chilo partellus); (d) Cales noack on citrus woolly whitefly (Aleurothixus floccosus); and (e) Tiphlosromolus aripo on cassava green mite (Monorychelus tanajoa) 2.7 ADVANTAGES OF INTEGRATED PEST MANAGEMENT Integrated Pest Management (IPM) fundamentally differs from the traditional pest control programs in that it addresses more than just the symptoms of a pest problem. Non-integrated pest control programs tend to focus on killing pests while ignoring the reasons why pests are there in the first place, which doesn’t do much to prevent recurring problems. By removing or altering the conditions that attract or are conducive to pest infestations, IPM practitioners can better cure existing infestations and prevent future ones. Scheduled chemical treatments are not IPM. Many pest control plans call for routine pesticide applications whether pests are present or not. These applications are seen as “protective barriers� that will prevent infestations but they are not. Unnecessary applications may even lead to the development of pesticide resistance in target pest populations and increase problem infestations instead of reducing them. Hence application of a pesticide on a regular schedule is not IPM. IPM relies on routine inspection and monitoring for pest presence. Pesticides are considered only when there is clear evidence of pest presence (e.g., pest sightings, droppings or pest catches in monitoring traps, and when non-chemical approaches such as vacuuming, trapping and exclusion (i.e., physically blocking pests’ entrance) have been unsuccessful or are inappropriate. IPM techniques are less toxic and more targeted. Some pest controllers will apply pesticide to exposed areas far from where it is really needed and use more of it than necessary. IPM practitioners apply pesticides with precision and choose the least-toxic formulation to get the job done. IPM is not a one-person job. Long-term pest management solutions typically depend on daily pest monitoring and a variety of sanitation, breeding, tillage, management and appropriate agronomic practices. No one person can do it alone. Without cooperation from land owners, land occupiers, management and staff, the IPM model falls apart and chemical treatments will be difficult to avoid. IPM requires greater expertise than traditional programs. Managing pests with less pesticide requires a strong working knowledge of pest biology and behavior, current pest control technologies and practices, climate and its effects on pest proliferation, greenhouse and storage structural characteristics and staff behavior. Without this knowledge, it will be difficult, if not impossible, to prevent infestations. IPM is more effective in controlling pests over long periods. This is not surprising, since IPM combines many control techniques instead of relying on any one technique. IPM’s efficacy 23 advantage has been confirmed by research and in practice. IPM approach is recommended by pesticide management stakeholders. Investing in IPM programs may initially cost more than traditional methods but for the long- term IPM is analogous to preventive health maintenance. IIPM is more cost-effective in terms of time, personnel and materials to prevent pest problems than the practice of to remediating the same symptoms again and again. IPM poses less risk than persistent use of chemical pesticides. Farm workers may have compromised immune, neurological, digestive and respiratory systems that put them at increased risk of suffering harmful effects from exposure to pesticides. Chemically sensitive individuals, pregnant women, infants, children and the elderly may be particularly vulnerable to the effects of pesticides. By reducing pesticide use, IPM helps reduce the potential for negative impacts on human health and the environment. 24 CHAPTER THREE: STEPS IN SETTING UP INTEGRATED PEST MANAGEMENT 3.1 IDENTIFY THE IMPLEMENTATION TEAM Transition to an IPM program requires a diverse, action-oriented IPM Committee. This IPM Committee will be an environmentally conscious Committee and will be part of the District Development Committee lead by the District Agricultural Development Officer (DADO) as a member of the District Development Committee (DDC). A representative of the Farm Group will be a member of this Committee. This arrangement is appropriate, because implementation of an IPM program can be tracked as a performance indicator. The leader of this team should be familiar with pests, pesticides and pesticide regulations. IPM leadership is guided by pest management principles and environmental issues. Leadership with such academic background qualifies to serve as authority to supervise IPM implementation. Other team members could include Environmental District Officer (EDO), agronomists, crop protection experts (entomologists, pathologists) and District Health Officer (DHO). 3.2 DECIDE ON THE SCALE OF IMPLEMENTATION To determine the scale of implementation, a strategic approach will be taken. IPM will be clearly defined and discussed by the DDC as is done for all other development projects. A representative of the EMC of the ASWAp-SP must attend these meetings to help explain the IPM approach and give examples of similar documented success studies. Through these discussions comprehension will be achieved, and potential objections will be addressed with successful practical examples. 3.3 REVIEW AND SET MEASURABLE OBJECTIVES FOR THE IPMP The IPM Committee will set measurable objectives and refine the IPM indicators to be relevant to their district, and determining factors such as:  When the IPM program will start  How much it will cost  What will accomplish by choosing IPM  How success shall be monitored The determination above must be done prior to IPM implementation. Additionally, measurable goals will be set, to track:  Pest management costs;  Monitoring of pest activity before and after implementation of an IPM program;  Number of calls related to pest problems and toxic chemical use reduction. Furthermore, when the shift to IPM will occur is must be resolved prior to implementation. The initial step will be to establish an implementation timeline that includes time to execute all of the steps outlined in the implementation plan. It is imperative to include time to 25 organize the administration of the IPM and conduct any farmer training as well as manage the IPM process. The following must be calculated: The IPM Committee will gather information on previously implemented or currently being implemented IPM programs. The time it took to develop them and how successful they have been. They will obtain the budgetary and any technical information for the previously implemented IPM programs and analyse the elements to establish lessons to learn. Field visits to currently running programmes will be conducted to get the practical insight. Reduced pesticide use is the substantive yardstick in measuring an IPM’s ability to create a safer environment. The IPM Committee will therefore design an information database that includes annual quantities of pesticides used to enable comparative analysis to the previous years. The goal will be a downward trend over time or ideally, a specific reduction amount, ultimately leading to a scant usage of highly toxic pest control chemicals. 3.4 ANALYSE CURRENT HOUSEKEEPING, MAINTENANCE AND PEST CONTROL PRACTICES While preparing to make a transition to IPM, the IPM Committee will familiarize itself with the organization’s current policies and practices with respect to structural maintenance, sanitation and pest control. Occasionally, current practice may be consistent with IPM principles. Familiarization will provide the flexibility necessary to adapt to, and prepare for the necessary changes. Structural maintenance is arguably the most efficient way to keep pests out of a facility because it physically stops pests from entering wherever possible. Structural maintenance will therefore be a regular part of the IPM. Cracks, crevices or other unnecessary openings in the building exterior that can be used by pests as harbourage areas or entry points regardless of size, will be sealed appropriately. Sanitation deprives pests of food and water. A sanitation plan must therefore be accounted for in the development of an IPM. Staff must be provided with special sanitation training 3.5 ESTABLISH A SYSTEM OF REGULAR IPM INSPECTIONS IPM’s central focus is regular facility inspections. Such inspections are the “lifeblood� for a continuous cycle of IPM activities that may or may not include chemical treatments. Activities will include: a) Routine Inspections b) Pest Identification c) Selection of Control Methods d) Monitoring and Evaluation IPM inspections must emphasize on the four “zones� of pest activity: (1) Entry points (2) Water sources (3) Food sources (4) Harbourage areas. During inspections, all existing pest issues and potential problem areas, inside and outside, must be noted for follow-up. 26 For in-house IPM programs, the greatest inspection challenge will be establishing routine, proactive surveillance by trained specialists. To ensure this is done, the EMC or an independent consultant will conduct annual inspections and audits. 3.6 DEFINE THE TREATMENT POLICY SELECTION A clear written policy on how the facility will respond to pests when they appear must be developed. Included in the policy will be definitions of both non-chemical and chemical treatment options and the sequence or prioritization in which they will be considered. It should be unequivocal on when and where chemical treatments are appropriate. Finally, it should include an “approved materials� list to ensure informed choices when chemical treatments are applied. Correctly identifying the pest that has invaded the area before is key to an effective IPM. Due to pest behaviour variations from one species to the other, the appropriate response will vary accordingly. Once the pest is identified and the source of activity is pinpointed, the treatment policy will call for habitat modifications such as exclusion, repair or better sanitation. These counter measures can drastically minimize pest presence before chemical responses are considered. Additional treatment options—chemical and nonchemical—can then be tailored to the biology and behaviour of the target pest. The final step in the pest response cycle is Monitoring. The information gained through ongoing monitoring of the problem will facilitate determination of supplemental treatment options if required. 3.7 ESTABLISH COMMUNICATION PROTOCOLS Communication protocols must be developed to assist environmental services, facility maintenance, facility management and service providers. IPM is a cooperative effort and effective communication between various parties is essential for success. IPM Committee and farmers must document pest sightings. The IPM Committee will make recommendations and notify ASWAp-SP of chemical treatments. They will also communicate with the maintenance team to make the necessary repairs. 3.8 DEVELOP FARMER TRAINING PLANS AND POLICIES The Farmer Groups will serve as a pool of “inspectors� charged with reporting pest sightings, to expedite response times and help limit the scope of new infestations. Training sessions will be conducted, to acquaint farmers with IPM principles and their responsibilities for the success of the IPM program. 3.9 TRACK PROGRESS AND REWARD SUCCESS Measurable objectives set at the beginning, must be measured against the IPM program’s performance at least once a year. Documentation to facilitate the evaluation process is as follows: a. Detailed description of the parameters and service protocols of the IPM program, stating the ground rules. 27 b. Specific locations where pest management work was performed c. Dates of service. d. Activity descriptions, e.g., baiting, crack-and crevice treatment, trapping, structural repair and e. Log of any pesticide applications, including:  Target pest(s)  The brand names and active ingredients of any pesticides applied  PCB registration numbers of pesticides applied  Percentages of mix used in dilution  Volume of pesticides used expressed in kilograms of active ingredient  Applicator’s name(s) and certification identity (copy of original certification and recertification should be maintained.)  Facility floor plan on which all pest control devices mapped and numbered  Pest tracking logs (sightings and trap counts)  Action plans, including structural and sanitation plans, to correct any pest problems  Pest sighting memos for IPM Committee to use in reporting pest presence to DEC  Using these records, and the goals of the IPM program (increased efficacy, lower costs and reduced pesticide use), the IPM Committe must see:  Fewer pest sightings and farmer complaints  Lower monitoring-station counts over time  Lower costs after the first 12-18 months, once IPM’s efficacy advantage has had time to take effect  Downward trend in volume or frequency of chemical pesticide usage IPM is a team effort. Therefore the IPM Committee will track and report the program’s successes following each evaluation; and encourage good practices by recognizing farmers who played a role. Communicating the success of the program in reducing toxic chemical use and exposure, reducing pest complaints and lowering costs will help farmers to understand the purpose of the program and appreciate its success. The more they understand, the more likely they will participate willingly in helping expand and institutionalize IPM. After the program has been in place for long enough to show significant results, It is recommended for the IPM Committee to work with ASWAp - ASP to publicize successes more broadly and to demonstrate the environmentally responsible approach to effective pest management and control. IPF Committee and ASWAp -SP will lead by example by sharing success with other stakeholders. 28 CHAPTER FOUR: IMPACTS OF PEST MANAGEMENT PRACTICES IPM will play a key role in the agricultural productivity; leading to a wide range of socio- economic impacts and overall economic development of the country. Agricultural productivity is closely related to reduction in poverty and malnutrition. Hence, small-scale farmers in particular, will play an important role in reducing poverty and malnutrition and creating widespread growth through the implementation of IPM for the ASWAp-SP. On the other hand pest management practices, if not implemented properly, will have negative impacts on the environment as well as harmful effects on human beings and animals. The following sections provide positive and negative impacts of pest management practices. 4.1 POSITIVE IMPACTS OF CHEMICAL PESTICIDES Chemical pesticides may improve yields in the short term. However, continued application of chemical pesticides results in long term negative impacts which are presented in Section 4.2 4.2 NEGATIVE IMPACTS OF CHEMICAL PESTICIDES Depletion of organic soil nutrients Practical experience has shown that in many areas of the country, soils lack the basic and necessary organic soil nutrients to sustain crop production yields due to chemical imbalance; as a result there is increasing dependence on chemical fertilizers whose impact is short lived. Mitigation measures Apply soil conditioning measures which include IPM Poisoning of non target species including natural biological pesticides Poisoning of non target species may occur due to negligence or lack of knowledge of chemical pesticide potency, equipment malfunction and use of wrong type of equipment; wrong time and method of application (spraying). Chemical pesticides and residues can be dangerous to non-target wild animals; fish and invertebrates as well as aquatic arthropods. Mitigation Measures  Supervise and control use of chemical pesticides to ensure that only approved and recommended ones are used  Use recommended equipment and approved methods of application  Regularly maintain and clean the equipment.  Use recommended and appropriate protective clothing.  Conduct training seminars in integrated Pesticide Management  Clean equipment and dispose old equipment as recommended by manufacturer. Adulteration Pesticides dealers may adulterate or dilute their chemical pesticides for financial gains 29 Mitigation measures Conduct regular inspection, sampling and testing of chemical pesticides Water soil and environmental pollution Water, soil and environmental pollution may occur due to spillage during loading and offloading of vessels and during storage. Mitigation measures  Provide suitable warehouse  Use of bio-beds, draining channels and draining dams.  Use chemical remains to re-spray.  Clean equipment in one place.  Use plants such as water lilies to absorb waste pesticides.  Take stock of pesticide containers  Apply Integrated Pesticide Management  Train farmers not to spray toxic chemicals close to water sources  Train farmers to maintain spray equipment in safe operational order Health and safety risks Farmers and other persons around pesticides storage and handling areas may be exposed to hazardous chemicals. Stocks of obsolete pesticides are a serious health and environmental risk in many countries of Africa. Pesticides are often not stored correctly, resulting in corroded containers, lost labels and release of the chemicals into the environment. Pesticide stockpiles pose a very serious health and safety risks of contaminating drinking water, food or the air. The presence of compounds in the soil for up to five years since last application shows that chemical pesticides persist in soils. High levels of these chemicals become harmful to man and aquatic community as the chemicals are eventually washed as run off into water bodies. Mitigation Measures  Provide protective clothing to workers and ensure it is used.  Train farmers in proper handling of chemical pesticides and conduct routine medical examination for workers.  Promote IPM to replace harmful chemicals Pesticide misuse, over / under application Pesticides may be misused, underused or overused due to lack of appropriate knowledge of application rates. In response to the need to be prepared for initiating a control campaign at short notice, stockpiles of chemical pesticides are maintained in many of the countries using them. Stockpiles of chemical pesticide pose serious threats of contaminating drinking-water, food or the air. Mitigation Measures  Conduct training sessions and awareness campaigns on appropriate and approved chemical pesticides application.  Purchase only enough stocks as required and destroy obsolete stocks of chemical pesticides 30 Intentional poisoning Pesticides may be used for poisoning to kill intentionally or commit suicide due to social pressures and frustration. Mitigation Measures Ensure responsible, mentally sound and mature persons are given charge and control of approved chemical pesticides. Restrict accessibility to chemical pesticides; and conduct regular spot checks to balance stock. Drug resistance in pests Pests may develop resistance to pesticides due to lack of appropriate knowledge in pesticides application Mitigation Measures Train farmers in correct application of pesticides 4.3 POSITIVE IMPACTS OF NON CHEMICAL PESTICIDE Non chemical pesticides, which include biological controls, manual and mechanical methods of managing pests; entails the use of environmentally and socially acceptable methods on the host, to eliminate pests or diseases. 4.3.1 Positive impacts of biological controls Reduced environmental and health risks In biological control of pests and diseases; insects, bacteria or fungi are applied on the host to eliminate the pest or disease. This is one of the better known environmentally friendly control methods as compared to other non chemical control methods. Biological control is applied carefully and selectively and since no chemicals are used, the method has no adverse effect on people’s health and the environment. Enhancement Measures Establish and disseminate environmental and health benefits of biological controls to the communities for them to appreciate the advantages Ease of application and integration with other control methods Application of biological controls can be done easily through community participation and can be integrated in other IPM control methods. Some of the biological controls are known to the communities in some specific areas. Enhancement measures Prepare an inventory of indigenous and established biological control methods and conduct community awareness seminars to enhance community knowledge base Resistance to pests through improved varieties The use of resistant clones in the control of diseases and adoption of fast methods of propagating plantings has numerous environmental benefits. For example providing a reliable supply of improved seed will have important benefits on resistance to pests. 31 Tissue culture technology also has the potential to increase biodiversity by replacing the stocks of rare and endangered tree species. The wider environmental benefits of increasing tree cover include improving soil stability, reducing erosion, preventing desertification and stabilizing global climate. By increasing and sustaining the supply of timber, pressure on forests will be reduced on natural forests, helping to preserve valuable natural biodiversity and rare habitats. Enhancement measures Rural people have a tendency of resisting to introduction of new varieties and sticking to traditional seed varieties. Awareness campaigns on the benefits of new and improved seed varieties, which are resistant to pest will help reduce application of chemical pesticides. 4.3.2 Positive impacts of mechanical methods Very fast method This method involves the use of automated machines and may be a fast way of weeding. However, this method is not suitable for the ASWAp – SP as it is highly costly and the small scale farming methods are not conducive to the method 4.3.3 Positive impacts of manual methods No pollution on the environment This method is environmentally friendly, as there is no pollution from the manual control. Methods basically imply of the use of labour with simple implements/tools. The method is friendly to the environment as there is no pollution of land, water or air when applied. 4.4 NEGATIVE IMPACTS OF NON CHEMICAL PESTICIDES 4.4.1 Negative impacts of biological controls Limited knowledge of consequences of impacts Farming communities often lack the appropriate knowledge of types and methods or times of application for biological pest control methods. Some of the biological controls for instance, may not be very selective on hosts and as a result, they may attack other unintended plants or crops when the target host is eliminated. This may create an imbalance in the ecosystem. In Lake Kyoga and Victoria for instance, after beetles were successfully used for control of water hyacinth in the late 1990’s, new plants (ecological succession) which emerged pose problems on water transport water supply and fishing in the lake. Mitigation Measure Biological controls must be applied carefully with the full knowledge of the consequences. Hence farming communities must be appropriately trained and indigenous knowledge on natural biological controls must be harnessed from them. Biological control agents are slow in action Biological control agents are known to be slow in action and may take a longer period to generate results; and therefore cannot be used in emergency situations. The slowness of biological agents to act may frustrate IPM programmes as farmers are used to the rapid though unsustainable results of chemical pesticides. 32 Mitigation measures  Educate farmers on the long term benefits of the biological methods to win their confidence and acceptance of the method.  Phase transition from chemical to IPM methods to ensure no appreciable loss of production during transition 4.4.2 Negative impacts of mechanical methods Impact: High cost of machines and environmental problems of weed disposal This method involves the use of automated machines and may be expensive depending which machines are used. For example inter-cultivation is done using a tractor mounted inter- cultivator to control weeds in crops such as sugarcane and use of boom sprays. Use of mechanical methods may be friendly or unfriendly to the environment depending on the operation carried out and the disposal technique of the waste weeds. For example when water hyacinth are chopped mechanically and left to rot, they result into accumulation of debris. This material impacts on biotic communities, the environment and socioeconomic activities. Safe operation of the machines is important especially if they are to be used in rural areas. Mitigation measures Mechanical methods may be appropriate for large scale operations but will not be appropriate for the case of ASWAp – SP. This method calls for the removal of the chopped materials from the site and their disposal in an environmentally friendly manner. Hence these methods are included only to highlight their availability and would not be appropriate for the ASWAp - SP. However, if they are to be used somewhere else, an integrated system of weed removal and utilization has to be developed to reduce the costs. 4.4.3 Negative impacts of manual methods The major concern is often the high cost involved. For example weeding of tea is particularly expensive before the tea matures and completely covers the ground. This method is not applicable to small scale farmers who normally use the hoe which is more appropriate than manual picking of weeds Health hazards Manual control methods pose risks of snake bites, hippo or crocodile attacks, depending on which plant and where the operation is carried out. 4.5 POSITIVE IMPACTS OF IPM Increase in agricultural yields Increased agricultural productivity is a precondition for growth and development in agrarian economies such as Malawi and most African countries. Integrated pest management practices will contribute to an increase in agricultural yields through appropriate prevention of crop damage and preservation of produce. Enhancement measures Train farmers in timely and appropriate use of pest management techniques to protect maize from the great grain borer and other pests; and to protect other crops from pest damage. 33 Contribution to Food Security Application of pest management practices will result in increased yields and efficient preservation of produce, subsequently providing enhanced food security; and contributing to the overall national goals on food security Enhancement measures  Train pesticides marketers in selection and handling of approved pesticides  Train farmers in the appropriate application of the various IPM practices  Educate farmers on preservation techniques and timeframes of different integrated pest management options. Saving in foreign exchange due to reduced application of chemical pesticides Promotion and increased application of non chemical pesticides will result in reduced importation of chemical pesticides thereby saving foreign exchange. Enhancement measures  Train pesticides suppliers in selection of appropriate pesticides to be eligible for supplying to ASWAp-SP;  Train farmers in the appropriate application of the various IPM practices to reduce application of chemical pesticides; and  Enforce regulation prohibiting importation of banned chemical pesticides Contribution to offsetting rural/ urban migration Increase in farm income-generating opportunities due to better yields and availability of surplus produce for sale in the rural areas will help offset rural – urban migration. Enhancement measures Assist local communities to establish cooperatives and to market produce to potential markets for additional income. Improved environmental protection Increased application of IPM, through the use of biological controls, mechanical methods and indigenous control mechanisms will mean reduced application of polluting chemicals such as organochlorides, pyrethroids and traizines which are harmful to the environment. It will also help reduce application of banned chemicals such as DDT and dieldrine, which are sometimes smuggled across the borders. Enhancement Measures  Enforce regulation prohibiting importation of banned chemical pesticides  Educate farmers on harmful consequences of banned chemical pesticides 4.2 COMMON MAIZE PEST PROBLEMS AND RECOMMENDED IPM PRACTICES Maize is the most common staple in Malawi and is the target as well as the main focus of the ASWAp – PS, under the FISP. Major maize pest problems and recommended management practices are given in Table 5.1 34 Table 4.1 Major maize pest problems and recommended pest management Pest Recommended management practices Stalk borers (Busseola  Burry or burn Stalks to eliminate diapausing larvae fusca)  Plant early to reduces infestation  Intercrop with pulses (except rice)  Apply neem (arobani) powder (4-5 gm i.e. pinch of 3 fingers) per funnel  Apply neem seed cake (4 gm/hole) during planting  Use carbofuran and carbaryl as insecticides  Use extract of Neuratanenia mitis, a botanical pesticide  Apply ash in maize funnels.  Uproot and burn any infected crop African armyworm  Scout the crop immediately the forecast warns of expected (Spodoptera exempta) outbreak in the area  Apply recommended insecticide or botanical extract timely Seedling weevils  Plant timely to avoid damage (Tanymecus spp. &  Scout the crop Mesokeuvus spp)  Apply lambda cyhalothrin if necessary Larger grain borer  Select tolerant varieties (LGB) Weevils  Harvest timely, dry adequately and sorting and clean produce Moths  Dehusking and shelling Red flour beetle  Cleaning & repair storage facilities Dried bean beetles  Use rodent guards in areas with rat problems  Use improved granaries such as metallic silos.  Use appropriate natural grain protectants where applicable or, use recommended insecticides at recommended dosage  Keep the grain in air tight containers and store these in a  shady place, preferably in-doors  Carry out regular inspection of the store and produce for timely detection of damage to the grain and/or storage structure to minimize potential loss or damage  Promote biological control of LGB using Teretriosoma nigrescens (Tn) to minimize infestation from wild sources. Red locust  Planting early  Promote use of green muscle which include fungal formulation  Apply Fenitrothrom especially in extreme cases Grey leaf spots (GLS)  Practice crop rotation  Plant recommended resistant varieties  Observe recommended time of planting,  Remove infected plant debris by deep ploughing  Uproot and burn infected crops. Maize streak virus  Planting early  Plant recommended resistant varieties  Uproot and burn infected stalks after harvesting Northern leaf blight  Practice crop rotation  Deep plough crop residues 35  Plant recommended resistant varieties Maize streak virus  Observe recommended time of planting to avoid the diseases (MSV) (Cicadulina mbila)  Plant recommended tolerant varieties  Early planting Leaf rusts (Puccinia  Planting timely, Crop rotation, Clean seeds, Reduce density, sorghi)  Allow adequate aeration Leaf blights  Crop rotation, Deep plough of crop residues (Helminthosparium turcicum and maydis) Common smut (Ustilago  Clean seeds maydis)  Practice crop rotation  Uproot and burn any infected crops  Remove plant debris by deep ploughing Weeds:Wild lettuce,  Practice crop rotation Starber weeds  Prepare land properly and weed timely (oxygonum sinuatum),  Use recommended herbicides when necessary Star grass, Wondering  Hand pull and weed with hoe jew, Late weed,  Intercropping and use resistant/tolerant varieties Digitaria spp.  Improve soil fertility and weed timely Witch weed (Striga spp)  Hand pull weeds at flowering to avoid seed formation  Use of false host plants e.g. rotation of maize with cotton or legumes and apply manure 36 CHAPTER FIVE: PEST MANAGEMENT AND MONITORING PLANS 5.1 PEST MANAGEMENT PLAN The Integrated Pest Management and Monitoring Plan (IPMMP) is developed from the impacts and mitigation measures identified in Chapter 4. The IPMMP include impacts from application of chemical as well as non- chemical pesticides. The reason why chemical pesticides are included is that in the initial stages of implementation of the IPM, chemical pesticides will still be used but will be gradually phased out as the IPM gets established. The purpose of the IPMMP is to ensure that the identified impacts related to application of pesticides are mitigated, controlled or eliminated through planned activities to be implemented throughout the project life. The IPMMP also provides opportunities for the enhancement of positive impacts. The IPMMP gives details of the mitigation measures to be implemented for the impacts; and the responsible institutions to implement them. Implementation of the IPMMP may be slightly modified to suit changes or emergencies that may occur on site at the time of project implementation. The plan therefore should be considered as the main framework that must be followed to ensure that the key potential negative impacts are kept minimal or under control. In this regard, flexibility should be allowed to optimize the implementation of the IPMMP for the best results in pest management. The IPMMP consists of generic or typical environmental impacts that are derived from the site investigations, public consultations and professional judgment. This is because the specific and detailed impacts cannot be predicted without details for the project design and construction activities as well as the specific project locations. The IPMMP will however, provide guidance in the development of more detailed IPMMP’s, once the project design and construction details are known. Site specific Integrated Pest Management and monitoring plans will depend on the scope of identified major impacts to be addressed in the implementation of the project. Presented in Table 5.1 below is a generic or typical environmental management and monitoring plan, which would easily fit in the implementation of the ASWAp - SP. 5.2 PEST MONITORING PLAN Successful implementation of the ASWAp – SP Integrated Pest Management Plan in the project district will require regular monitoring and evaluation of activities undertaken by the Farmer Groups. The focus of monitoring and evaluation will be to assess the build up of IPM capacity among the Farmer Groups and the extent to which IPM techniques are being adopted in agricultural production, and the economic benefits that farmers derive by adopting IPM. It is also crucial to evaluate the prevailing trends in the benefits of reducing pesticide distribution, application and misuse. Indicators that require regular monitoring and evaluation during the programme implementation include the following: 37 1 Number of membership Farmer Groups formed for IPM capacity building in the project districts: 2 Number of farmers who have successfully received IPM training in IPM methods 3 Number of trainees practicing IPM according to the training instructions 4 Numbers of Farmer Organizations that nominated members for IPM training 5 Number of women as a percentage of total participating in IPM and successfully trained 6 Number of farmers as a percentage of total applying IPM 7 Rate of IPM adoption (number of people as a percent of total) every year 8 Improvement in farm production due to adoption of IPM as a percent of production without IPM 9 Increase in farm revenue resulting from adoption of IPM practices, compared with revenue from conventional practices 10 Improvement in the health status of farmers 11 Extent to which crops are produced using chemical pesticides compared with total crop production 12 Efficiency of pesticide use and handling 13 Reduction in chemical pesticide poisoning and environmental contamination 14 Number of IPM participatory research project completed 15 Overall assessment of activities that are going according to IPMMP; activities that need improvement; and remedial actions required 38 Table 5.1: Integrated Pest Management and Monitoring Plan Item Potential Cause of Control/Mitigation Responsible Standards/Regulation Monitoring Monitoring No Issues / Concern Measure Person/Institution Institution Frequency Concerns 1. NEGATIVE IMPACTS OF CHEMICAL PESTICIDES Depletion of Persistent use Apply soil conditioning Farmers IPMMP ASWAp-SP Quarterly organic soil of chemical measures which include EMC nutrients pesticides IPM 1.1 Poisoning of Lack of Training ASWAp - SP Pesticides Act -PCB Annually non target knowledge of -EAD species pesticide Monitor use of including potency and pesticides to ensure that sprayers and negligence only approved and consumers recommended chemicals are used 1.2 Adulteration Lack of Inspection, sampling Pesticides -Packaging and storage -MBS, PCB, - Quarterly controls and testing Transporters and standards --ASWAp - Suppliers -Product specifications SP EMC -EMA -Pesticides Act 1.3 Health and Exposure to -Provide protective Agro-dealers Labour regulations, -Min. of Annually safety risks pesticides clothing and ensure it is PCB regulations Labour. used. -PCB -Train farmers in proper -DA pesticides handling. -ASWAp - SP -Routine medical examination 1.4 Water, soil and - -Construct suitable Pesticides -Pesticides and PCB Quarterly Environmental Inappropriate warehouse Transporters and equipment Environmental pollution building for -Use of bio-beds, Suppliers manufacturer’s Affairs. storage of draining channels and recommendations. -Water pesticides. draining dams. Frmers -Water pollution Resources 39 Item Potential Cause of Control/Mitigation Responsible Standards/Regulation Monitoring Monitoring No Issues / Concern Measure Person/Institution Institution Frequency Concerns -Cleaning of -Use chemical remains standards. Board equipment, to re-spray. -Disposal of -Clean equipment in remains of one place. pesticides -Use plants such as -Disposal of water lilies to absorb containers waste pesticides. and -Take stock of pesticide equipment containers -Integrated Pesticide Management -Train farmers not to spray toxic chemicals close to water sources -Train farmers to maintain spray equipment in safe operational order Wrong -Routine inspection and Agro-dealers -PCB regulations, -PCB Half yearly shelving or inventory checks -Manufacturer’s -DA stacking guidelines -Inadequate -Provide adequate and Agro-dealers -PCB regulations, -PCB Half yearly storage space. separate storage space -Manufacturer’s -Bad for pesticides guidelines housekeeping - Multipurpose use of warehouse 40 Item Potential Cause of Control/Mitigation Responsible Standards/Regulation Monitoring Monitoring No Issues / Concern Measure Person/Institution Institution Frequency Concerns Multi- Control use of Farmers Pesticides Act -PCB Quarterly purpose use equipment and -EMC of equipment pesticides -DA or pesticides -Thorough cleaning of equipment -Training -Integrated Pesticide Management Illegal Prohibit discharge of Agro-dealers EMA EAD Half yearly disposal of pesticides wastes to ASWAp - SP Pesticides Act EMC pesticides open dumps where children, domestic animals, rodents and some wildlife species scavenge -Equipment -Regular maintenance Farmers -Manufacturer’s -PCB Annually malfunction of equipment. ASWAp - SP recommendations. -EMC -Wrong type -Use recommended -Equipment of equipment. equipment. maintenance policy -Time and -Use approved methods method of of application. application -Use recommended (spraying) protective clothing. -Training seminars -Integrated Pesticide Management -Improper -Clean equipment and Farmers -Manufacturer’s -PCB Annually cleaning of dispose equipment as recommendations. -EMC equipment. recommended by -PCB regulations. -DA 41 Item Potential Cause of Control/Mitigation Responsible Standards/Regulation Monitoring Monitoring No Issues / Concern Measure Person/Institution Institution Frequency Concerns -Improper manufacturer. Water resources disposal of -Use bio-beds and regulations cleaning draining dams to water and old dispose cleaning and equipment drainage waters -Integrated Pesticide Management Over- Buying the required and Agro-dealers Pesticides Act PCB Quarterly stocking approved quantities only 1.5 Pesticide Lack of -Training and ASWAp - SP Pesticide -PCB, Annually misuse, over / appropriate awareness campaigns manufacturers -EAD under use knowledge regulations 1.6 Intentional Frustration, -Ensure responsible, Farmers Pesticides Act -PCB Annually poisoning Social mentally sound and Agro-dealers -Min of pressures mature persons are ASWAp - SP Labour given charge and -DA control of pesticides. -Restrict accessibility to pesticides. -Spot checking Drug resistance Lack of Train farmers in correct Farmers Pesticides Act PCB Half yearly in pests appropriate application of pesticides ASWAp - SP knowledge in pesticides application 42 Item Potential Cause of Control/Mitigation Responsible Standards/Regulation Monitoring Monitoring No Issues / Concern Measure Person/Institution Institution Frequency Concerns 2. POSITIVE IMPACTS OF BIOLOGICAL CONTROLS Reduced Establish and ASWAp - SP EMA -EAD Quarterly environmental disseminate Water Resources -Ministry of and health risks environmental and Board Labour health benefits of -Ministry of biological controls to Health the communities for them to appreciate the advantages Ease of Prepare an inventory of ASWAp - SP IPMMP Department of Annually application and indigenous and Land integration established biological Resources with other control methods and control conduct community methods awareness seminars to enhance community knowledge base Resistance to Rural people have a ASWAp - SP IPMMP MoAFS Annually pests through tendency of resisting to improved introduction of new varieties varieties and sticking to traditional seed varieties. Awareness campaigns on the benefits of new and improved seed varieties, which are resistant to pest will help reduce application of chemical 43 Item Potential Cause of Control/Mitigation Responsible Standards/Regulation Monitoring Monitoring No Issues / Concern Measure Person/Institution Institution Frequency Concerns pesticides 3. POSITIVE IMPACTS OF MECHANICAL METHODS Very fast Not method applicable to ASWAp -SP 4. NEGATIVE IMPACTS OF BIOLOGICAL CONTROLS Limited Wrong Biological controls Farmers IPMMP ASWAp-SP Annually knowledge of application of must be applied consequences method by carefully with the full of impacts farmers knowledge of the consequences. Hence farming communities must be appropriately trained and indigenous knowledge on natural biological controls must be harnessed from them. Biological Frustration of Educate farmers on the ASWAp - SP IPMMP EMC Annually control agents farmers long term benefits of MoAFS are slow in the biological methods action to win their confidence and acceptance of the method. Phase transition from 44 Item Potential Cause of Control/Mitigation Responsible Standards/Regulation Monitoring Monitoring No Issues / Concern Measure Person/Institution Institution Frequency Concerns chemical to IPM methods to ensure no appreciable loss of production during transition 5. NEGATIVE IMPACTS OF MECHANICAL METHODS High cost Not suitable Mechanical methods N/A N/A N/A N/A method for may be appropriate for smallholder large scale operations farmer and but will not be the ASWAp- appropriate for the case SP of ASWAp – SP. This method calls for choosing a method whereby the chopped materials are completely removed from the site and disposed in an environmentally friendly manner. Hence these methods are included to highlight their availability. However, if they are to be used anywhere else, an integrated system of weed removal and utilization has to be 45 Item Potential Cause of Control/Mitigation Responsible Standards/Regulation Monitoring Monitoring No Issues / Concern Measure Person/Institution Institution Frequency Concerns developed to reduce the costs. 6. NEGATIVE IMPACTS OF MANUAL METHODS Health hazards Slow but Use appropriate manual Farmers ASWAp-SP Department of Anuaaly suitable for implements and tools Land smallholder Resources farmers 7. POSITIVE IMPACTS OF IPM Increase in Non chemical Train farmers in timely ASWAp - SP IPMMP MoAFS Annually agricultural methods are and appropriate use of yields generally pest management slow techniques to protect maize from the great grain borer and other pests; and to protect other crops from pest damage 46 Item Potential Cause of Control/Mitigation Responsible Standards/Regulation Monitoring Monitoring No Issues / Concern Measure Person/Institution Institution Frequency Concerns Contribution to Non chemical  Train pesticides ASWAp - SP IPMMP MoAFS Annually Food Security methods are marketers in generally selection and slow handling of approved pesticides  Train farmers in the appropriate application of the various IPM practices  Educate farmers on preservation techniques and timeframes of different integrated pest management options. Saving in Banned  Train pesticides ASWAp-SP Pesticides Act PCB Quarterly foreign chemicals suppliers in exchange due selection of to reduced appropriate application of pesticides to be chemical eligible for pesticides supplying to ASWAp-SP;  Train farmers in the appropriate application of the various IPM 47 Item Potential Cause of Control/Mitigation Responsible Standards/Regulation Monitoring Monitoring No Issues / Concern Measure Person/Institution Institution Frequency Concerns practices to reduce application of chemical pesticides; and  Enforce regulation prohibiting importation of banned chemical pesticides Contribution to Banned  Enforce regulation Farmers Pesticides Act PCB Quarterly offsetting rural/ chemicals prohibiting ASWAp-SP urban importation of migration banned chemical pesticides  Educate farmers on harmful consequences of banned chemical pesticides 48 CHAPTER 6: CAPACITY AND TRAINING NEEDS FOR SUCCESSFUL IMPLEMENTATION OF THE IPMP 6.1 CAPACITY NEEDS IPMP is a knowledge intensive and interactive methodology. It calls for a precise identification and diagnosis of pests and pest problems. Comprehending ecosystem interplays equips farmers with biological and ecological control knowledge and assists them in making pragmatic pest control decisions. The success of IPMP is largely dependent on developing and sustaining institutional and human capacity to facilitate experiential learning. Experiential learning is a prerequisite to making informed decisions in integrating scientific and indigenous knowledge. This assists in tackling district, ward and village specific problems. Ineffective communication between farmers, extension agents and researchers from research institutes and universities has often translated into poorly-targeted research or to poor adoption of promising options generated by research. Essentially, the full potential of agricultural research is compromised. Closer farmer-research investigator interaction, adaptive research and participatory learning approaches in capacity building efforts serves as a remedy to narrowing this gap, making research results more applicable to farmers. Farmers must at least be trained in: (a) Biological and ecological processes underpinning IPM options, (b) The practical application of the newly acquired knowledge to choose compatible methods to reduce production and post-harvest losses through frequent field visits, meetings, demonstrations, (c) Adaptive research trails. Capacity building will be achieved through farmer-based collaborative management mechanisms where all key stakeholders shall be regarded as equal partners. Beneficiary farmers shall be the principal actors facilitated by other actors from research institutes, academic institutions, sector ministries, NGOs, etc. as partners whose role will be to facilitate the process and provide technical direction and any other support necessary for the implementation of IPM. Pilot IPMP implementation must be designed to build on, and to some extent strengthen existing national capacities for the promotion and implementation of IPM. The major actors and partners will include the following: The programme beneficiary farmers: As the principal beneficiaries, they will be organized into Farmer Groups for training and adoption of IPM practices. The farmers will receive assistance from Community IPM Action Committees, to coordinate IPM activities in their areas. 49 At the District level, the District Development Committees through the District Agricultural Officers will assist the farmers to form the Farmer Groups through whom IPM activities will be implemented. The District Agricultural Officer will provide the technical assistance to the Farmer Groups. The Agricultural Development Divisions (ADD’s) will backstop the District Development Committees and assist them with the technological advancements in IPM development. They will coordinate with research institutions and organise field days to disseminate the information. The MoAFS will provide logistical and technical support to the ASWAp-SP EMC. They will thus provide capacity and policy guidance and oversight for implementation of the IPM at National level. MoAFS will, through the ASWAp – SP, provide the necessary budgetary support and overall monitoring of the IPM activities. Agricultural sector departments have the national mandate in the implementation of crop protection and pest management research. They will provide technical support to ASWAp- SP, through the respective Agricultural Development Divisions, in the implementation of IPM. EMC will exploit the sector department’s experiences in the implementation of IPM and management of outbreak and migratory pest. ASWAp-SP will undertake to build the capacities of researchers to train farmers and community leaders in promoting IPM activities. They will also facilitate information sharing with local farmers. The MoAFS and the respective districts will provide staff for training local farmers and play a major role with NGOs/CBOs in the public awareness campaigns, production of extension materials, radio and television programs in the respective districts. The Pesticides Control Board will provide the necessary information on pesticides and train the Farmer Groups in all aspects of pesticides including application rates, methods, storage and disposal of residues. They will also monitor pesticides stocks and potency at the dealers. The Ministry of Health (MoH): through the District Health Officers, will set up databases on incidence of poisoning, effect of pesticides on human health and environmental contamination. This data will then be used to measure and validate the ameliorating effects of IPM adoption and implementation that is expected to reduce risks to pesticides exposure. The Environmental Affairs Department (EAD): through the Environmental District Officers, will conduct environmental monitoring in relation to IPM. EAD will contribute towards training the beneficiary Farmer Groups in environmental pest management. Partners in capacity building and training will include the following:  Research and training institutions: Agricultural research stations will formulate proposals for research and training programmes for the development of IPM protocols, and training modules for the IPM for ASWAp-SP.  Agriculture Services Providers and NGOs that are providing services to farmers and improving agricultural productivity, environmental management and rural health 50 matters will be identified to provide services and technical support in the implementation of IPM. IPMP training and capacity building is necessary for the key role players and stakeholders. It will ensure that they possess the appropriate skills for maximum IPMP implementation. Organizations and institutions to be trained are presented in Table 6.1 Table 6.1: Training programme for implementation of IPM Institution to be IPMP training objective Area of concentration Training trained duration Farmers  Acquire technical  biological and 3 days knowledge ecological control  Carry the message home to  Pest management their peers (theoretical and  Engage in participatory practical) learning  Precautionary safety measures of pesticide use ASWAp-SP  Building capacities of  Agriculture research Program researchers to train farmers in areas of interest duration and community leaders for ASWAp-SP  Promoting IPMP activities.  Farmer/trainer  Conduct research and coordination lessons learnt in related  Promotion of IPMP projects in Africa and  Management of elsewhere. outbreak and  Learn about elements migratory pests. necessary to consider when  Leadership preparing annual work  Financial advice plans and budgets.  To be fully abreast with ASWAp-SP’s PMP, so they can be fully informed as they provide direction for SWAp-SP’s pest management 1. Ministry of  set up databases on  IPMP scientific study  N/A Health (MoH ) incidence of data on data collection, poisoning, effect of analysis and storage pesticides on human health  Assess pesticide use and environmental impact on the contamination. environment 51 Institution to be IPMP training objective Area of concentration Training trained duration MoAFS:  provide logistical and  Play a secondary  N/A technical support to the supportive role to ASWAp-SP training team. IPMP  provide staff within implementation, and districts for training local provide general farmers oversight of the  Train IPM trainers. project  provide capacity and policy guidance and/or oversight for implementation of the IPM  play major role with NGOs/CBOs in the public awareness campaign  monitor the prevalence of inputs supply by the dealers 2. Environmental  Collaborate with the  Training farmers in  N/A Affairs district hospitals and IPMP Department natural resources (EAD): management offices of the districts on training and beneficiary Farmer Groups in environmental and pest management. 3. Land Resources  assist in training in non-  IPMP non pesticide  N/A and Conservation pesticides management management Department practices (LRCD) 4. Pesticides  Regulate pesticide:  Regulation  N/A Control Board o Imports (PCB) o Transportation o Use o Disposal o registration 5. WorldBank, FAO  serve as a valuable source  Organization  N/A and Global IPM of technical information  support for research facility  provide technical support for training, planning and field implementation of IPM in Farmer Groups. 6. Agriculture  Provide services and  Specialized  N/A Service Providers technical support to the leadership and NGOs field implementation of IPM and other pilot IPMP. 52 Institution to be IPMP training objective Area of concentration Training trained duration 7. Marketers Learn about:  Theoretical pesticide 3 Days  safety and precautionary general knowledge measures while handling pesticides  general information about pesticides (classification, directions, warning signs etc.) The IPMP training program is a four facet initiative, as detailed below: National level (ministries) A total of 30 representatives from the organizations listed in table 6.1 shall attend a three day training program in Lilongwe, with each member making a presentation on the specific areas of expertise, and how their technical know-how would be applied in the implementation of IPM. Regional level 50 participants shall be trained in IPM, to facilitate program inspection. District level (extension workers) From the representative districts, 100 participants shall take part in a three day training program in pursuit of facilitating supervisory talent. Community level (farmers) Being P Beneficiaries, 30 farmers from each of the five districts, shall be selected to participate in a three day IPM training program. Areas of concentration are discussed in table 6.2 The indicative summary budget for the training is as tabulated presented in Table 6.2: Table 6.2 Summary of budget for IPMP training Capacity Building Program Description Cost $ National level (ministries) Cost for 1 training = $16,354 16,354 ADD Level Cost for 1 training = 9,784 48,920 Cost for 5 districts= $ 48,920 District level (extension workers) Cost for 1 training = $8,064 40,320 Cost for 5 districts= $ 40,320 Community level (farmers) Cost for 1 training = $18,356 91,780 Cost for 5 districts= $91,780 As part of the ASWAp-SP’s objectives to strengthen MoAFS’ capacities, AF2 will provide adequate resources to deliver additional training. More specifically, provisions have been made to deliver more training on IPM at the grassroots level to front line staff and farmers. 53 REFERENCES  FAO (1991) Guidelines: for Registration and Control of Pesticides, Pesticides Distribution, transportation, Safe Handling, Storage, Labelling and Disposal, Rome, Italy.  FAO (1991) International Code of Conduct on the Distribution and Use of Pesticides,  FAO (1985) Guidelines for the Packaging, Storage, Good Libelling Practice, Transportation and Disposal of Waste Pesticide and Pesticide Containers  Government of Malawi ( 1987) ,Crop Production Policy, Ministry of Agriculture and Food Security  Government of Malawi (1995) Malawi Agricultural and Natural Resources Research Master Plan, Ministry of Agriculture and Food Security  Government of Malawi (2003), Seed Policy, Ministry of Agriculture and Food Security  Government of Malawi (2006) Land Resources Conservation Strategic Plan 2007-2011, Ministry of Agriculture and Food Security  Government of Malawi (1969) Water Resources Act, Ministry of Water Development,  Government of Malawi (1994) National Environmental Action Plan. Volume 1 , Department of Research and Environment Affairs.  Government of Malawi (1995) Constitution of the Republic Of Malawi, Ministry of Justice and Constitutional Affairs  Government of Malawi (1996) Environmental Management Act, Number 23, Department of Environmental Affairs  Government of Malawi (2004 and 2002) The National State of Environment Report, Department of Environmental Affairs.  Government of Malawi (1996) Forestry Policy, Forestry Department  Government of Malawi (1996), National Environmental Policy Ministry of Research and Environmental Affairs  Government of Malawi (2000) Pesticides Act , Ministry of Agriculture and Food Security  Government of Malawi (2000) Pesticides Regulations, Ministry of Agriculture and Food Security  Government of Malawi (2000) Agriculture Extension in the New Millennium Policy, Ministry of Agriculture and Food Security  Government of Malawi (2000) National Irrigation Policy and Development Strategy , Department of Irrigation  Government of Malawi (2000) National Land Resources Management Policy and Strategy, Ministry of Agriculture and Food Security  Government of Malawi (2001) National Fisheries and Aquaculture Policy, Ministry of Agriculture and Food Security  Government of Malawi (2002), Environmental Affairs Department, State of Environment Report. Ministry of Natural Resources and Environment Affairs  Government of Malawi (2003) HIV/AIDS in the Agriculture Sector Policy and Strategy 2003-2008; Ministry of Agriculture and Food Security  Government of Malawi (2004), Malawi Demographic and Health Survey. National Statistical Office  Government of Malawi (2004), National Water Policy Ministry of Water Development  Government of Malawi (2005) New Era Agricultural Policy: A Strategic Agenda for Addressing Economic Development and Food Security in Malawi, Ministry of Agriculture and Food Security  Government of Malawi (2005) Strategic Plan for pesticides Control Board, Ministry of Agriculture and Food Security  Government of Malawi (2006) Food Security Policy, Ministry of Agriculture and Food Security  Government of Malawi (2006) Malawi Growth and Development Strategy . Ministry Of Finance and Economic Planning.  Government of Malawi (2007) Contract Farming Strategy, Ministry of Agriculture and Food Security  Government of Malawi (2007) National Fertilizer Strategy, Ministry of Agriculture and Food Security  WHO (1995) World Health Organization’s Recommended Classification of Pesticides by Hazard and Guidelines to Classification (Geneva: WHO 1994-95) 54 APPENDICES Appendix 2.1: Internationally accepted standards on pesticides A. GUIDELINES ON USE OF PERSONAL PROTECTIVE EQUIPMENT (PPE) 1. PPE must be kept separate (i.e. in different lockers) from personal clothing. 2. Protective clothing must be thoroughly washed after each application or spray operation before being worn again. 3. Contaminated protective clothing must under no circumstances be washed at home and should not be removed from the store area. 4. Durable, light-weight and comfortable protective clothing must be provided to workers handling pesticides. 5. Overalls can be two-piece (jacket with hood and trousers) or one-piece hooded garments. 6. Hood must close around gas mask. 7. Sleeves must close at wrists with elasticized cuffs and the trousers must have elasticized closures around waist and ankles. 8. Jackets of two-piece suits should seal on the hips. 9. Overalls should preferably be light in colour so that contamination with pesticides can be visible. 10. A clear transparent face shield, which is impervious to solvent and pesticide vapours; and which provides full face protection should be worn as indicated on the product label, when preparing and applying spray mixtures. 11. Safety goggles are an acceptable alternative to a face shield. 12. Non-slippery gloves made of nitrile rubber, PVC, neoprene or butyl rubber that are long enough to give cover to a minimum of 90 mm above the wrist must be used. 13. Lined gloves are not recommended as pesticides can accumulate in the lining material. 14. Gloves should preferably be light in colour so that contamination with pesticides can be visible. 15. Before contaminated gloves are removed from the hands after use, they must first be washed with soap and water. They should again be washed inside out after removal. 16. Unlined, rubber boots that are at least calf-high must be used. 55 17. To prevent pesticide from entering boots, trousers must be worn outside/over the boots. 18. At the end of each day’s spraying boots should be washed inside and outside. 19. A cotton hat with brim should be used for protection against spray drift. 20. A waterproof hat and cape must be worn by operators during overhead spraying. 21. A hood that covers the head, neck and shoulders of workers should be worn for total skin protection during the application of irritant powders (e.g. sulphur). 22. Respirators should be worn when indicated on the product label. 23. Tractors with closed canopies and air conditioning are recommended for maximum safety and comfort during application. This could improve the productivity of operators and the quality of pesticide application and coverage. Ablution facilities 24. Facilities must be provided for operators to wash or shower at the end of each spray operation or shift. 25. Contaminated washing water generated at the ablution facilities shall not be disposed of into any water source, including rivers, ground water sources and sewerage systems. This water can also be channelled into a mesh-covered evaporation pit like the one for the filling area. B. GUIDELINES FOR SAFE USE AND HANDLING/APPLICATION OF PESTICIDES Preparation and mixing of spray formulations 1. Application of pesticides should be selective and targeted (in space and time) 2. Pesticides must be prepared and used in the prescribed manner as indicated on the label(s). Any other way is a criminal offence and this must be communicated to workers as such. 3. Only prepare the amount of spray mixture required for one specific application. 4. If containers with concentrated formulation are transported to filling points further away from the agrochemical store, these containers must be locked into a secure metal or galvanized mesh trunk. Filling points 5. The mixing and filling area for spray equipment must be well away from any water sources. 6. The floor of the filling point must be of non-porous material (e.g. cement with damp 56 coursing) and must be bunded (retaining wall). 7. Rinse liquid from measuring vessels must be added to the spray tank. 8. Soil and water sources may not be contaminated by run-off and/or spillage. Construct a non-permeable evaporation pit that is either filled with stones or covered with a metal grid, into which contaminated run-off water can be channelled. Add a handful of lime to increase the pH. Ultra-violet radiation from the sun, combined with the high pH will break down active ingredients and water will evaporate. Cover the pit when it rains, to prevent rainwater from filling up the pit. Alternatively, install a tank for contaminated water that can be emptied by a professional hazardous waste disposal company. Worker health 9. Workers handling chemicals must be declared medically fit to work with pesticides. This examination must be done by an Occupational Health practitioner that is a general practitioner with a post-graduate diploma in occupational medicine, and not by a clinic nurse or ordinary general practitioner. 10. All workers exposed to and handling pesticides must undergo routine medical examinations (mostly involving a blood test) to test for signs of pesticide exposure. These should preferably be done annually at the end of the spraying season, but the interval between examinations may not exceed two years. 11. Any incident of exposure to pesticides must be documented according to occupational health and safety regulations and labour regulations. 12. All medical records and records of pesticide exposure must be kept for at least 30 years for every worker exposed to pesticides. Training 13. All farm workers shall undergo training in the meaning of the signs, warning and labels on containers of pesticides. 14. Formal training (i.e. certificates awarded) in the meaning of signs, warning notices and labels on chemical containers, as well as on the interpretation of written instructions must be provided to all workers handling pesticides. 15. Spray operators must receive formal practical training in the safe handling and application of pesticides and must understand the risks involved and precautions to be taken. C. GUIDELINES ON FORMULATION AND REPACKAGING OF PESTICIDES 1. Distribution and use of pesticides may require local formulation and/or repackaging. In such cases, ASWAp-SP should ensure that, packaging or repackaging material conforms to FAO pesticide management guidelines, and is carried out only on permissible premises. 57 2. ASWAp-SP should ensure that; (a) the staff working in such premises are adequately protected against toxic hazards; (b) That the resulting pesticide products will be properly packaged and labelled, and that the contents will conform to the relevant quality standards. 3. Pesticide regulations should be strictly enforced in all ASWAp-SP projects. D. GUIDELINES ON GOOD LABELLING PRACTICE FOR PESTICIDES 1. Label content: The purpose of the label is to provide the user with all the essential information about the product and how to use it safely and effectively. The minimum information on the label should therefore tell the user: What is in the container; The hazard it represents; and Associated safety information Instructions for use. 2. What is in the container? The following information identifying the contents of the container should appear on all labels: (a) Product or Trade name, associated with the product category (e.g. herbicide, insecticide, fungicide, etc.). (b) Type of formulation -name and code, as per International Formulation Coding System. (c) Active ingredient, name (ISO) or other locally used common name or in the absence of either the chemical name as used by IUPAC and content. This should normally be expressed as "contains x g ai per kg" (for solids, viscous liquids, aerosols or volatile liquids) or "contains x g a.i. per liter" (for other liquids), or just "y%". (d) Net contents of the pack. This should be expressed in metric units (e.g. liter, gram, kilogram, which can be abbreviated to l, g and kg. . 3. Safety information There should be a clear warning on the label in relation to: * Reading the safety instructions before opening the pack. * Handling, transport and storage warning symbols. * Hazard classification/symbol. There may be a necessity to classify the product with relation to its toxicity. 58 2.3 The following safety precautions should appear on all labels - preferably in black print on a white background: 4. Safety Precautions The safety text must cover the following product specific advice: Good agricultural practice; Relevant protective clothing; Precautions when handling the concentrate (if applicable); Precautions during and after application; Environmental safety during and after application; Safe storage; Safe disposal of product and used container; and How to clean equipment (if a potential risk exists) 5. Safety Pictograms Safety pictograms reinforcing the safety text should be included. 6. Warning The following must appear on all labels: Keep locked up and out of reach of children Other warning phrases may be aimed at good agricultural practice and/or steps which need to be taken to avoid adverse environmental effects. 7. First Aid Advice and Medical Treatment Most labels should carry first aid and medical advice, where relevant. Additional information regarding symptoms, special tests and antidotal measures may be added, where appropriate, for particular products. 8. Leaflets Any safety text on the label must also appear on any leaflets associated with it. 59 E. GUIDELINES ON STORAGE AND TRANSPORTATION OF PESTICIDES 1. ASWAp-SP is obliged to promulgate, update and enforce rules and regulations for safe, responsible storage and transport. Areas covered by these rules include maintenance of the original product labels, spill prevention, container adequacy, proper marking in storage, facility specifications, product separation, protection from moisture and contamination by other products, restriction of access, and other measures to ensure product integrity and safety. 2. Pesticide stores must be located away from areas where people or animals are housed and away from water sources, wells, and canals. 3. Pesticide stores should be located on high ground and fenced, with access only for authorized persons. 4. There should be easy access for pesticide delivery vehicles and – ideally – access on at least three sides of the building for fire-fighting vehicles and equipment in case of emergency. 5. Pesticides must not be kept where they would be exposed to sunlight, water, or moisture, which could affect their stability. 6. Storehouses should be secure and well ventilated. 7. Pesticide stocks should be arranged such that the oldest are used first (“first in first out� [FIFO] principle), to avoid the accumulation of obsolete stock. 8. Containers should be arranged to minimize handling and thus avoid mechanical damage which could give rise to leaks 9. Containers and cartons should be stacked safely, with the height of stacks limited to ensure stability. 10. Pesticides should not be transported in the same vehicle as items such as agricultural produce, food, clothing, drugs, toys, and cosmetics that could become hazardous if contaminated. 11. Pesticide containers should be loaded in such a way that they will not be damaged during transport, their labels will not be rubbed off, and they will not shift and fall off the transport vehicle onto rough road surfaces. 12. Vehicles transporting pesticides should carry prominently displayed warning notices. 13. Pesticides should not be carried in the passenger compartments of transport vehicles and should be kept tightly secured and covered at all times during transport. 14. The pesticide load should be checked at intervals during transportation, and any leaks, spills, or other contamination should be cleaned up immediately using accepted standard procedures. 60 15. In the event of leakage while the transport vehicle is moving, the vehicle should be brought to a halt immediately so that the leak can be stopped and the leaked product cleaned up. 16. Containers should be inspected upon arrival at the receiving station. 17. WHO/FAO guidelines (FAO, 1995a) should be followed for handling pesticide-related products during storage, transport, fires, and spills; 18. There should be official reports to ASWAp-SP and follow-up enquiries in the event of fires, spills, poisonings, and other hazardous events; and 19. Rules and regulations laid down in the Recommendations on the transport of dangerous goods: model regulations (United Nations, 2002) and by international organizations concerned with the specific modes of transport and ASWAp-SP should be respected. F. GUIDELINES ON DISTRIBUTION OF PESTICIDES 1. Distribution of pesticides should be carried by trained personnel or under proper supervision. Misdirection or mishandling can result in the product falling into the hands of uninformed recipients or causing human or environmental risk. 2. Proper packaging is also important to ensure the confinement of the product and its safe handling. 3. The original package is intended to ensure safe distribution; when repacking is necessary, the new packing should meet the specifications of the original packaging as well as complying with the FAO pest management guidelines 4. Packaging (original or repackaging) should conform to FAO pest management guidelines requirements to ensure safety in distribution and prevent unauthorized sale or distribution of vector control pesticides. 5. The distributor should be aware that the shipment is a hazardous product. 6. The distributor must provide a timely service to ensure that products are available on an agreed date that takes into consideration the time of the original order and other related shipment matters. 7. The procurement process should anticipate shipment and distribution schedules. 8. A distribution scheme for pesticide products should be developed that reduces hazards associated with multiple handling and transportation. 9. The distribution of pesticide products to the point(s) of storage by the supplier should therefore be included in tender documents; and 10. All distributors of pesticides should be licensed. 61 G. GUIDELINES ON DISPOSAL OF PESTICIDES 1. When pesticides have passed their expiry date, specific methods of disposal must follow FAO pest management guidelines for safe disposal of hazardous materials. 2. Similarly, any equipment that is no longer serviceable should be removed from inventory, decontaminated and disassembled to ensure that it will not be subsequently diverted to other uses. 4. Avoid accumulation of obsolete pesticides by provision for phasing-out when pesticides are to be banned or deregistered, refusal of donations in excess of requirement; and spelling out of product specifications, including required packaging and labelling (long-life label). 5. Adherence to WHO/FAO guidelines for handling pesticide-related products during storage, transport, fires, spills and disposal. 6. Consultation with ASWAp-SP for disposal of obsolete pesticides. 7. Prevention of risk to human and environmental health from emptied packaging and containers, rinsates, and outdated products. 8. Ensure provision of instructions for disposal of pesticide containers as label requirements. 9. Leftover agrochemical formulations must not end up in rivers, streams, ditches, storage dams, etc. and should not be emptied out on the ground. 10. Empty pesticide containers must not be re-used and must be disposed of in a manner that avoids exposure to humans and contamination of the environment. 11. Relevant guidelines appearing on the label(s) should be followed. 12. Empty containers may not be burnt/ incinerated on the farm. 13. Empty containers must be rinsed with integrated pressure rinsing devices on the sprayer, or triple-rinsed (rinsed at least three times) with water, and the rinsate added to the spray/race tank/ Diptank or kept secure until disposal is possible. 14. Triple-rinsed containers can be punctured (in the case of plastics), shattered (in the case of glass) or otherwise rendered unserviceable so as to prevent reuse, whereafter it may be disposed of in a registered hazardous waste landfill site (operated by a registered hazardous waste removal company). 15. Empty triple-rinsed plastic containers can also be collected and removed for recycling by a registered recycler. 16. Obsolete or unwanted chemicals should preferably be sent back to local suppliers or alternatively be removed by certified or approved chemical waste disposal companies. 17. Leftover formulations should never be combined or mixed while being stored for later removal /disposal. 62 Appendix 2.2: Pesticides for Registration Consideration in Malawi INSECTICIDES COMMON NAME TRADE NAME FORMULATION CONCENTRATION Alphacypermethrin Fastac (Ripcord EC 100g/LT Super) Acephate Acephate, Orthene SP 750g/KG Ace SP 750g/KG Lancer DF 970g/KG Lancer SP 750g/KG Asafet SP 750g/KG Novatheren TM SC 750g/KG Acetamiprid Novacetam SL 222g/KG Spear SP 200g/KG Aldicarb Sanacarb GR 150g/KG Temik GR 150g/KG Amitraz Mitac EC 200g/LT Azinphos-methyl Gusathion SC 350g/LT Azocyclotin Peropal SC 500g/LT Peropal WP 250g/KG Benfuracarb Oncol EC 200g/LT Oncol CS 400g/LT Oncol LS 900g/LT Betacyfluthrin Bulldoc 050RC EC 50g/LT Bulldock 0.050g GR 5g/LT Bifenthrin Talstar EC 100g/LT Bisect EC 100g/LT Buprofezin Applaud WP 500g/KG Carbaryl Karbaspray WP 850g/KG Sevin WP 850g/KG Carbaryl WP 850g/KG Carbofuran Karbadust DP 50g/KG Curaterr GR 100g/KG Carbosan GR 100g/KG Carbofuran GR 100g/KG Furadan GR 100g/KG Carbosulfan Marshal EC 250g/LT Marshals suscon GR 100g/LT CMF EC 250g/LT Carbosulfan EC 250g/LT Chinomethionat Morestan WP 250g/KG Chlordane Chlordane EC 600g/LT Termidan EC 600g/LT Chlorpyrifos Dursban EC 480g/LT Dursban WG 750g/KG Lirifos SC 500g/LT/480g/LT Apollo SC 500g/LT 63 COMMON NAME TRADE NAME FORMULATION CONCENTRATION Cyfluthrin Baythroid EC 50g/LT Baysol AE/NF 50g/LT Sneak WE 50g/LT Cyhexatin Cyhexatin SC 600g/LT Cypermethrin Cypennethrin EC 200g/LT Cypersan EC 200g/LT Cyrux EC 200g/LT Kemprin EC 200g/LT Sherpa EC 200g/LT Cymbush EC 200g/LT Ripcord EC 200g/LT Novacord TM EC 200g/LT Cypennethrin + Polytrin C EC 40 + 400g/LT Profenofos Deltamethrin Bitam SC 50g/LT Deltabak SC 50g/LT K-O Gard SC 50g/LT Crackdown SC 10g/LT Cislin TB 10g/LT Decitab Tablet 25g/LT Deltamethrin EC 0.5g/KG Decis SC 50g/LT K-Otab Tablet 25g/LT Decis forte EC 100g/LT Deltamethrin+Endosu Kracker EC 2.5g + 475g/LT lfan Deltamethrin+Fenitro Shumba Supper DP 1.3g + 10g/KG thion Deltamethrin+Pipero K-Biol EC 25g + 250g/LT nyl Butoxide Demeton-Methyl Metaxystox (I) EC 250g/LT Demeton-S-Methyl SC 250g/LT Diazinon Diazinon EC 275g/LT Dichlorvos DDVP EC 1000g/LT Dedevap EC 1000g/LT Dichlorvos EC 1000g/LT DDVP 100 EC 100g/LT Doom M/V 100g/LT Dicofol Kelthane EC 185g/LT Dimethoate Cygon EC 400g/LT Dimethoate EC 400g/LT Rogor, Perfethion EC 400g/LT Dimet EC 400g/LT Dimethoate 20 WP WP 200g/KG Nugor EC 400g/LT Disulfoton Disyston 5g GR 50g/KG Solvirex GR 50g/KG Disulfoton GR 50g/KG 64 COMMON NAME TRADE NAME FORMULATION CONCENTRATION Disulfoton + Repulse 5.75g GR 50g + 7.5g/KG Triadimenol Endosulfan Thiodan EC 350g/LT Endosulfan SC 350g/LT MO 350g/LT EC 350g/LT SC 475g/LT WP 475g/LT SC 350g/LT Endflo MO 350g/LT Agrisulfan dust DP 50g/KG Thioflo SC 475g/LT Thionex WP 500g/KG EC 350g/LT Thiokill EC 350g/LT Fenitrothion Sumition EC 500g/LT Fenitrothion Sumithion ULV 1000g/LT Fenitrothion ULV 1000g/LT EC 500g/LT Folithion EC 600g/LT Tracker Garden EC 600g/LT Insecticide Fenitrothion + Sumicombi 3D DP 25g + 5g/KG Fenvalerate Fenpropathrin Meothrin EC 200g/LT Fenthion Labaycid EC 500g/LT WP 500g/KG Fenvalernte Fenkill EC 200g/LT; 500g/LT Felecid EC 200g/LT Fenvalernte Sumicidin EC 200g/LT; 500g/LT Fenvalernte/ EC 200g/LT; 500g/LT Sanvalerate EC 200g/LT Novacidin TM EC 200g/LT Fipronil Regent GR 30g/KG Fipronil GR 30g/KG Furfural Crop Guard EC 900g/LT Gamma BHC Bexadust DP 6.0g/KG Imidachloprid Confidor SL 100g/LT, 200g/LT Confidor 70 WG 700g/KG Gaucho 70 WS WS 700g/KG 45 WS Imidachlorprid WS 700g/LT Gaucho 600 FS FS 600g/LT Gaucho 390 FS FS 390g/LT Protect 200 SL SL 200g/LT Protect 700 WS WS 700g/LT Imidachloprid Monceren GT FS 390g/LT 233g/LT Imidachloprid/Thiram Gaucho T WS 45 WS 65 COMMON NAME TRADE NAME FORMULATION CONCENTRATION Gaucho 275FS FS 175g/LT + 100g/LT Novacot Dress FS 350g/LT Isofenphos Peril turfgrass Insecticide SC 500g/LT Lambda-Cyhalothrin Karate EC 50g/LT WG 37.5g/LT CS 50g/LT Vajra EC 50g/LT Lambda-Cyhalothrin EC 50g/LT Novathrin EC 50g/LT Lufenuron Match EC 50g/LT Mercaptothion Malathion WP 250g/KG EC 250g/LT Mercaptothion WP 250g/KG Methamidophos Tamaron, EC 585g/LT Methaphos Sniper, Methamidophos Methomyl Methomyl, Lannate SL 200g/LT Methomyl, Lannate SP 900g/KG Methosan, SP 900g/KG Methomex Methoprene Kabat AE 41.3g/LT Mevinphos mevinphos EC 20g/LT Mineral oil Summer oil EC - Bacoil EC 835g/LT Monocrotophos Nuvacron WSC 400g/LT Monocron WSC 400g/LT Monocrotophos WSC 400g/LT Monostem WSC 400g/LT Azodrin WSC 400g/LT Novacrotophos TM SL 400g/LT Phoskill SL 400g/LT Oxydemeton-Methyl Metasystox ® EC 250g/LT Parathion Folidol EC 500g/LT Pamthion Pamthion EC 500g/LT Novaper EC 500g/LT Pamthion-Methyl Pamthion-Methyl EC 500g/LT Permethrin Coopex TC TC 250g/LT Tobacco guard EC 50g/LT Tabakskern EC 5.0g/LT Permethrin EC 100g/LT Phenthoate Elsan EC 500g/LT Phoxin Baythion Ant killer EC 500g/LT Turmoil soil insecticide EC 500g/LT Whack EC 500g/LT Pirimiphos-Methyl Actellic EC EC 500g/LT 66 COMMON NAME TRADE NAME FORMULATION CONCENTRATION Actellic dust DP 20g/KG Actellic smoke generator EU - Pirimiphos-Methyl Actellic Super EC EC 500g/LT + Permethrin Actellic Super dust DP 16g + 3g/KG Plus Pencycuron 50 Plus Pencycuron EC 50g/LT EC 50EC Plus Thiram 107EC Plus Thiram 107EC EC 107g/LT Profenophos Selecron EC 500g/LT Propargite Propargite EC 570g/LT 720g/LT 790g/LT Prothiophos Tokuthion EC 960g/LT Terbufox Terrafos GR 100g/KG Counter GR 100g/KG Terbufos Hunter GR 150g/LT Tetradifon Tedion V8 EC 81g/LT Thiachloprid Calypso SC 480g/LT Thiodicarb Larvin FW 375g/LT Thiophanate-Methyl Topsin WP 500g/KG Triazophos Hostathion EC 420g/LT Trichlorfon Dipterex SP 950g/KG GR 25g/KG Trichlorfon SP 950g/KG GR 25g/KG Triflumuron Alsystin SC 480g/LT Thiamethoxam Actara WG 250g/kg HERBICIDES COMMON NAME TRADE NAME FORMULATIO CONCENTRATION N Acetochlor Sprint EC 900g/LT Wenner EC 700g/LT Curagrass, EC 750g/Lt Crocodile EC 700g/LT Trophy S Bullet Har-I-cane Acetochlor + Atrazine + Propazine Tuff-E-Nuff SC 96g + 202g + 202g/LT Acetochlor + Atrazine + Simazine Robust SC 160g + 165g + 165g/LT Acetochlor + Atrazine + Terbuthylazine Acetrazine SC 125g + 187.5g + 187.5g/LT 67 COMMON NAME TRADE NAME FORMULATIO CONCENTRATION N Alachlor Alachlor 384, EC 384g/LT Eland EC 480g/LT Alachlor 480 EC 384g/LT Sanachlor 384 EC 480g/LT Lasso 480 & 384 CS 480g/LT Lasso MT Ametryn Gesapax SC 500g/LT Ametryn SC 500g/LT Ametryn WP 800g/KG Ametryn + Atrazine Ametra SC 250g + 250g/LT Asulam (Na-Salt) Asulox SL 331g/LT Asulam Asulam SL 400g/LT Atrazine Atrazine SC, WP, WG 500g/LT,800g/KG,900g/ Gesaprim WG k Gesaprim SC 900g/LT 500g/LT Atrazine + Suprazine, SC 600g/LT, 500g/LT Terbuthylazine Eliminator Atrazine + Terbuthylazine + Gadomil SC 262.5g +262.5g Metolachlor +175g/LT Bendioxide Basagran SL 480g/LT Bromacil Bromacil WP 800g/KG Hyvar-X80 WP 800g/KG Bromoxynil Bromox EC 225g/LT, 450g/LT Buctril DS EC 450g/LT Chlorimuron-Ethyl Classic WG 250g/KG Chlorimuron-Ethyl + Metribuzin Canopy WG 107g + 643g/KG Clomazone EC Novazone EC 450g/LT Cyanazine Cyanazine SC 500g/LT Bladex SC 500g/LT Cyanazine + Atrazine Blazine SC 250g +250g/LT Bladex Plus SC 333g +167g/LT 2-4 -D (Amine) Embamine EC 480g/LT 2-4 -D Amine SL 480g/LT 2-4 -D (Ester) 2,4 -D Ester EC 500g/LT 2-4 -DB 2,4 -DB AS 480g/LT, 500g/LT 2,4 -D Dicamba Spotaxe SL 240g +80g/LT 2,4 -D MCPA Rampant Turfgrass WSC 360g + 315g/LT Herbicide 2,4-D + Picloram Tordon 101 SL 240g + 65g/LT Dalapon Dalapon SP 850g/KG Dicamba Banvel EC 480g/LT SL 480g/LT Diuron Diuron WP 800g/KG 68 COMMON NAME TRADE NAME FORMULATIO CONCENTRATION N Diuron SC 500g/LT, 800g/LT Diuron + Paraquat Gramuron SC 300g + 100g/LT EPTC EPTAM EC 720g/LT EPTC (+Safener for EPTAM super EC 720g/LT Maize) Ethidimuron Ustilan GR 100g/KG Ustilan WP 700g/KG Fluazifop-P-Butyl Fusilade super, EC 150g/LT Forte Fluazifop-R-Methyl Gallant Super EC 108g/LT Flufenacet Tiara SC 500g/LT Flumetsulam Broadstrike WG 800g/LT Fluometuron Cottonex FW 500g/LT Flazafulfuron Kantana WP 100g/KG Oxyfluorfen Goal EC 240g/LT Glufosinate ammonium Basta WSC 200g/LT Glyphosate Mamba/Springbo SL 360g/LT k SL 360g/LT Ridder weed SL 360g/LT killer SL 180g/LT Roundup 480g/LT Cobra + Duiker 500g/LT Shaikdown Turbo Haloxyfob-R-Methyl- Gallant Super EC 104g/LT Ester Halusulfuron Servian WG 750g/LT Hexazinone Ransom SL 240g/LT Hexazionone Hexazinone, SC, SL 240g/LT 750 DF Hexsan SC 240g/LT Velpar L SP 900g/LT Velpar SP Ioxynil +2,4 -D Actril D.S. EC 100g +600g/LTD Isoxatlutole Merlin WG 750g/LT MCPA (K-salt) MCPA SL 400g/LT MCPB AS 400g/LT MCPB Mesotrione Callisto SC 480g/LT Metazachlor Pree EC 400g/LT Butisan S SC 400g/LT, 500g/LT Metolachlor Dual Magnum + EC 960g/LT Falcon Gold Metribuzin Veto SC 480g/LT Sencor SC 480g/LT Contrast Turfgrass SC 480g/LT 69 COMMON NAME TRADE NAME FORMULATIO CONCENTRATION N herbicide WP 480g/KG Sencor WP SC 480g/LT Metribuzin Metribuzin + Extreme plus WP 107 + 643g/KG Chlorimuron Ethyl MSMA MSMA SL 720g/LT MSMA EC 720g/LT Nicosulfuron Sanson SC 40g/LT Oxadiazon Ronstar EC 250g/LT Oxyfluorfen Goal EC 240g/LT Paraquat Paraquat SL 200g/LT Gramoxone EC 200g/LT Paraquat Dichloride Uniquat SL 200g/LT Pebulate Tillam 6E EC 720g/LT Pendimethalin + Paragon Plus WP 350g + 200g + 200g/KG Ametryne + Atrazine Pendimethalin + Paragon Extra WP 437 + 31g + 200g/KG Chlorimuron-Ethyl + Metribuzin Prometryn Gesagard FW 500g/KG Sethoxydim Nabu EC 186g/LT Simazine Simazine WP 800g/KG S-Metolachlor Dual Magnum EC 960g/LT Falcon Gold EC 960g/LT S.Metolachlor/Flumetsula Bateleur gold EC 630 + 20g/LT n Tebuthiuron Tebusan SC,WP 500g/LT, 500g& 800g/KG Terbumeton Terbumeton SC 500g/LT Terbumeton WP 800g/KG Terbuthylazine + Sorgomil Gold SC 600g/LT S-Metolachlor Terbuthyn Terbuthyn WP 800g/KG Terbuthyn Igran SC 490g/LT Terbuthyn + S- Igran +Combi SC 450g +10g/LT Metolachlor Gold Trifluralin EC 480g/LT Trifluralin SC 500g/LT FUNGICIDES COMMON NAME TRADE NAME FORMULATION CONCENTRATION Acibensolar-S-Metlyl Bion 50WG WG 500g/KG Acibanzolar-S-Metlyl Bion WG 50g/KG Anilazine Dyrene WP 750g/KG Azoxystrobin Ortiva 250SC SC 250g/KG Benomyl Benlate SC 480g/LT WP 500g/KG 70 COMMON NAME TRADE NAME FORMULATION CONCENTRATION FW 500g/LT Fundazol WP 500g/KG Bitertanol Baycor EC 300g/LT Captab Captab WP, SC 500g/KG, 500g/LT Carbendazim Derosol SC 510g/LT Chlorothalonil Chloronil SC 500g/LT Daconil WP 750g/KG Bravo FW 500g/LT, 720g/LT SC 500g/LT Copper Ammonium Copper Count N SL 316g/LT Nitrate Copper oxychloride Cupravit WP 850g/KG Demildex WP 850g/KG Copper oxychloride WP 850g/KG FW 600g/LT Copper Hydroxide Cung FU 538SC SC Copper Equiv. 350g/LT Cupric hydroxide Funguran – OH WP 770g/KG Cupric hydroxide WP 770g/KG Kocide 101 WP 770g/KG Kocide DF WG 614g/KG Cymoxanil Rimit 50.6 WP WP 500g +60g/KG +Mancozeb Cyproconazole ALTO 100 SL SL 100g/LT ALTO G34 GR 34g/KG Cyproconazole Alto mix GR 2.5g +75g/KG +Disulfoton Difenoconazole Score EC 250g/LT Difolatan Captafol WP 800g/KG Dimethomorph + Acrobat MZ WP 90g +600g/KG Mancozeb Dinocap Karathane WP 200g/KG Fenarimol Rubigan EC 120g/LT Fosetyl - Aluminium Alliette WP 800g/KG Hexaconazole Anvil SC 50g/LT Iprodione Rovral SC 250g/LT Rovral flo FW 255g/LT Iprodione SL 255g/LT Iprodione SL 255g/LT Iprodione + Rovral M - - Mancozeb Mancozeb Pennozeb WG 800g/KG Sancozeb WP 800g/KG Dithane M45 WP 800g/KG Mancozeb WG 800g/KG Mancozeb + Sandofan M8 WP 560g + 80g/KG Oxadixyl Maneb Manager Sc SC 435g + 4.7g/LT 71 COMMON NAME TRADE NAME FORMULATION CONCENTRATION (Dithiocarbamete) + Zinc Oxide Maneb + Fentin Brestan WP 180g + 540g/KG Acetate Metalaxyl + Ridomil MZ 70 WP WP 100g + 600g/KG Mancozeb Oruface + Mancozeb Patafol plus WP 60g + 640g/ KG Pencycuron Monceren SC 250g/LT Prochloraz + Sportac alpha EC 300g + 80g/LT Carbendazim SC 300g + 80g/LT Prochloraz + Mangane Chloride Sporgon WP 295g/KG Propamocarb - HCL Previcurn SC 722g/LT Propamocarb Propamocarb SL 722g/LT Hydrochloride Propiconazole Propiconazole EC 100g/LT, 200g/LT Propiconazole Tilt EC 250g/LT Propineb Antracol WP 700g/KG Pyrazophos Afugan EC 295g/LT Sulphur Wettable Sulphur WP 800g/KG Kumulus, Triovit WP 800g/KG Azoxystrobin Ortiva 250 SC SC 250g/LT Acibensolar-S- Bion 50 WG WG 500g/KG Methyl Difenoconazole Score EC 250g/LT Cyproconazole/ Verdadero GR 10 + 10g/KG Thiamethaxam Tebuconazole Raxil 015 ES ES 15g/LT Folicur EW 250g/LT EC 250g/LT Thiram Thiram WP 750g/KG Thiulin 50 DS DS 500g/KG Tolcofox Methyl Rizolex 50 WP 500g/KG Tolyfluanid Euparen Multi WP 500g/KG WP 500g/KG Tolyfluanid Sulphur Euparen multi E sulphur dust DP 75g + 920g/KG Triadimefon Bayleton WP 50g/KG Triadimefon Bounce turfgrass fungicide EC 250g/LT Shavit EC 250g/LT Bayfidan EC EC 250g/LT Bayfidan G GR 10g/KG Baytan DS DS 150g/KG Baytan FS FS 150g/LT Triadimefon + Bayleton A DS 50g + 700g/KG Propineb Triadimenol + Repulse 5.75g GR 7.5 + 50g/KG 72 COMMON NAME TRADE NAME FORMULATION CONCENTRATION Disulfoton Trichoderma Trichoderma WP - Tridemorph Calixin EC 750g/LT Zineb Zineb 70 WP WP 700g/KG FUMIGANTS COMMON NAME TRADE NAME FORMULATION CONCENTRATION Aluminium Gastoxin TB 560g/KG phosphide Phostoxin Alphos TB, Pellets 560g/KG + Aluminium Phosphide Magnesium Degesch plates FU (plates) 607g/KG phosphide Degesch strips FU (strips) 607g/KG Methyl Bromide + Methyl Bromide GA 980 + 20g/KG Chloropicrin Metabrom GA 980 + 20g/KG Curabrom GA 980 + 20g/KG NEMATICIDES COMMON NAME TRADE NAME FORMULATION CONCENTRATION Cadusafos Rugby GR 100g/KG Ethoprop MOCAP GR 100g/KG Ethylene Dibromide Ethylene Dibromide (EDB) (EDB) EC, MO 1800g/LT Fernamiphos Nemacur EC 400g/LT Nemacur GR 100g/KG Metham Sodium Herbifum Liquid 510g/LT Metam Sodium Concentration 510g/LT SC Methyl bromide + Methyl brimide Chloropicrin GA 980 + 20g/KG Oxamyl Vydate SL 240g/LT, 310g/LT 1,3 Dichloropropene Telone II Liquid concentrate 1110g/LT Metham-Sodium Herbifume Liquid concentrate 510g/LT MOLLUSCICIDES COMMON NAME TRADE NAME FORMULATION CONCENTRATION Carbaryl + Snailban RB 20 + 30g/Kg Metaldehyde Methiocarb Mesurol WP 800g/Kg RB (Pellets) 800g/Kg Methiocarb Draza RB 50g/Kg Byluscide EC, WP 250g/L; 700g/Kg Metason RB 50g/Kg PUBLIC HEALTH (ENVIRONMENTAL) PESTICIDES COMMON NAME TRADE NAME FORMULATION CONCENTRATION Alphacypermethin Fendona SC 58g/Kg WP 50g/Kg Betacyflutrhin Tempo SC 125g/LT 73 COMMON NAME TRADE NAME FORMULATION CONCENTRATION Brodifacoum Finale (Rodenticide) RB 0.02g/Kg 0.05g/Kg; 0.75g/Kg BB 0.05g/Kg; 0.75g/Kg 0.02g/Kg CB 0.05g/Kg; 0.75g/Kg 0.02g/Kg CB 0.05g?kg; 0.75g/Kg 0.02g/Kg Klerat BB 0.5g/Kg Chlorpyrifox Baygon roach bait DB - Coumatetralyl Racumin rat bait RB 3.75g/Kg Racumin rat poison FW 8g/LT Cyfluthrin Baythroid H WP 100g/kg Responsar EW 50g/LT Cyfluthrin + Blattanex AE 2.5g/Kg + 10g/Kg Propuxur Cyfluthrin + Baygon spray AE - Tetramethrin D-Allethrin Baygon mosquito FU (coils) 2g/Kg coils D-Allethrin + Baygon mosquito FU (mats) 50g + 2-g/Kg Piperonyl mats Butoxide DDVP Fly bait RB 5g/Kg Deltamethrin Glossinex SC 200g/LT Crackdonw SC 10g/LT K-Ogard SC 10g/LT K-Othrine SC 10g/LT K-Othrine 15 E.C 15g/LT Deltabak SC 50g/LT Super SC 25g/LT crackdown/Cislin WP 25g/Kg; 50g/Kg K-Othrine DP 2g/Kg K-Othrine Deltamethrin + K-Onet TB + Bednet - Bednet Diazion PCO diazinon EC 880g/LT Dichlorvos Super doom AE - Dichlorvos + Baygon fumigator AE 10g + 2g + 10g/Kg Tetremethrin Fenitrothion Reskol 64 EC 600g/LT Fipronil Fipronil SC 200g/LT Regent SC 200g/Lt Flumethrin Bayricol aerosol AE 2g/Kg Lambda-Cyhalothrin Icon 10 WP WP 100g/Kg Icon 2.5 CS Cs 25g/LT Mercaptothion Kopthion 50 DP DP 50g/Kg Methomyl Dy-fly RB 10g/Kg 74 COMMON NAME TRADE NAME FORMULATION CONCENTRATION Naled DBM Dibron SL 344.9g/LT Permethrin Coopex Dust DP 5g/Kg Coopex WP TC 250g/LT Cooper WP WP 250g/Kg Peripel 55 SC 550g/LT Temephosmostop EC 500g/LT Tobacco Cuard EC 50g/Kg Imperator SC 100g/LT Coopex smoke FU 135g/Kg generator Pemethrin + Pybuthrin 44 FU 0.39% + 0.382% + Piperonyl 0.206% Pipperonyl butoxide Baygon knockdown AE 10g + 2g + 1-g/Kg spray Butoxide + D- 0.206% + 0382% + Allethrin Pulvex fly smear - 0.205% Butoxide + D- Allethrin Phoxim + Honey Baygon ant bait RB 0.8G/Kg Propuxur Propuxur GA 0.5 – 2.0% Baygon dust DP 10g/Kg Baygon fly bait RB 10g/Kg Propuxur + Baygon surface AE - Cyfluthrin spray Pyrethrins + Coopermatic fly CB 9g/LT Piperonyl killer Butoxide Flip mosquito - - larvacide - - Mosquito larvacide - oil Kontakil RODENTICIDES COMMON NAME TRADE NAME FORMULATION CONCENTRATION Brodifacoum Finale SL 0.05g/LT; 0.025g/LT BB 0.05g/Kg; 0.02g/kg Klerat BB 0.05g/Kg Coumatetralyl Racumin FW Liquid 8g/LT BB Tracking 3.75g/Kg powder Flocoumafen Storm BB 0.05g/Kg Supakill - - PLANT GROWTH REGULATORS COMMON NAME TRADE NAME FORMULATION CONCENTRATION Alkylated phenol- Agal 90 Surfactant 940g/LT ethylene condensate Agripon Super Surfactant 940g/LT 75 Agrowett Nontonic - Armoblen Surfactant SL Various Astrozon green turf Nontonic SL Various dye Surfactant - Compement Dye - Curabuff Surfactant - G-49 Wetter Buffer + Spreader - Kynobuff Surfactant (Wetter) - BB5, Insure Ajuvant - Aminofit Amino Acid Essential Amino Complex acids for plant growth Butralin Tabamex EC 360g/LT Tobago EC 360g/LT Chlorthal-Dimethyl Razor, Erasor SC 360g/LT CU-Max Copper Liquid Complex Copper 50g/LT Cytokinins + Auxins Kelpak SL 0.031mg/LT + 11mg/LT Ethephon Ethephon SL 480g/LT; 217g/LT Ethrel SL 480g/LT; 217g/LT Ethrel Latex SL 480g/LT; 217g/LT stimulant Heptamethyltrisiloxane Silwet L77 Adjuvant 1000g/LT Modified phthalic – Latron B-1956 Speader/sticker - Glycerol alkyd resin Magnesium Magmax WP 65g/KG Multifeed N,P,K, Water Soluble 19:8:16 Micronutrients Foliar Fertilizer concentrate N-Decanol Antak, EC 690g/LT; 785g/LT Decasuckeride EC 690g/LT; 785g/LT Royaltac EC 690g/LT; 785g/LT Suckerkil N- Decanol N’Decanol + Octanol C85 EC 400 + 300g/LT Fair 85 EC 400 + 300g/Lt Nonylphenol Sanawett 90 Wetter/Sticker 945g/LT polyglycol ester NPK + Cronutrient Green gold plus - - NPK (Plus Bayfolan, GR 3-2-1 (22) micronutrients) Nitrophoska GR 3-2-1 (22) Turfolan Nitrophoska GR GR 3-2-1(22) Turfolan 3-2-1(22) Pendimethalin Accotab EC 330g/LT Bacstop EC 330g/LT Novatop EC 330g/Lt Pendimethalin EC 330g/LT 76 Polyethylene wax Tax wax Wax (fruit polish) - Teepol Detergent - - Teepol disinfectant - - Polyvinyl Polymer Mist Control Adjuvant 20g/LT Sodium borate Solubor WP 20.5%m/m Sodium molybdate Sodium molybdate WP 38.8%m/m Zinc oxide Zinc oxide WP 78.5%m/m Zinc-Max Zinc Liquid Zinc 1130g/LT complex ANIMAL HEALTH (PARASITICIDES) COMMON NAME TRADE NAME FORMULATION CONCENTRATION Alphamethrin Paracide EC 70g/Lt Amitrnz Milbitrnz EC 237.5g/kg Amitrnz Triatix stock spray EC 125g/LT Triatix TR Cargaryl Pulvex dog shampoo EC 50g/LT Chlorfenvinphos Chlorfenvinphos EC 200g/LT; 300g/LT SUPONA EC 200g/LT; 300g/LT Supona Super EC 1000g/LT Chlorfenvinphos + Tic grease - 4g + 4g/LT Dioxathion Chlorpyrifos Barrier EC 480g/LT Pulvex dog dip EC 150g/LT Pulvex dog powder DP 10.7g/Kg Closantel Prantel L 25g/LT Cyfluthrin Cylence NF (pour-on) 10g/LT Cypermethrin Pouracide NF - Deltamethrin Decatix NF (pour-on) 50g/LT Spotton Febantel + Pyrantel Welpan TB 1.6% + 1.44%m/v Pamoate Febantel + Pyrantel Drontal TB - emboate + Praziquantel Fenbendazole Rintal FW 100g/LT Fenthion-methyl Bayopet spotton L 100g/LT; 200g/LT Ticuvon spotton L 200g/LT Flumethrin Bayopet tick rinse EC 20g/LT Bayticol EC 20g/LT Drastic deadline L (pour-on) 10g/LT Flumethrin + Bacdip plus EC 20 + 100g/LT Piperonyl Ivomectin Ivomec L (injecticable) 1% M/V (Endectoparasiticide) Levamisole Levisan Flowable 25 + 34 g/LT Hydrochloride/ concentrate Oxychlozanide Praziquantel Cestocur FW 25g/LT 77 Propuxur Bayopet tic + Flea powder DP 10g/Kg Bayopet dog colar - 94g/Kg Bayopet cat collar - 94g/Kg Propuxur + Bayopet surface AE - Cyfluthrin spray Quainthiophos Bacdip AE 2g/Kg EC 500g/LT Bayopet dog and cat shampoo & - - conditioner Rafoxanide Ranide FW - Thiabendazole Thibenzole FW - Toltrazuril Baycox SL 25g/LT Systamex FW - Tetrachlorvinphos Piperonyl Butoxide 78